(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Long Neck Square End Mills (Carbide)（Coating：TiAlN）
| Days to Ship |
|
|---|
-
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 387.22- Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS
OSG
Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.
Standard Price: MYR 202.12- Days to Ship: 5 Day(s) or more -
GS MILL Long Neck, 2-Flute GSN2
NACHI
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 168.60- Days to Ship: 4 Day(s) or more -
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 416.59- Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS
OSG
A long-neck 4-flute end mill that supports processing in narrow and deep spaces. Bottom blade is of a specification that increases the strength of the corner portions.
Standard Price: MYR 262.38- Days to Ship: 5 Day(s) or more -
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.
Standard Price: MYR 105.91- Days to Ship: 8 Day(s) or more -
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.
Standard Price: MYR 153.00- Days to Ship: 10 Day(s) -
SED2LA Long Square End Mill, 2-Flute, OK Coated
OKAZAKI SEIKO
SED2LA, Long Square End Mill, 2-Flute, OK Coating
·The long type allows deep cavity milling.
·Sharp helix angle (45 to 60°)Standard Price: MYR 375.13- Days to Ship: 9 Day(s) or more -
TiAlN Coat, Carbide long neck square end mill, 2 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.
· A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 202.61- Days to Ship: 4 Day(s) or more -
TiAlN Coat, Carbide long neck square end mill, 4 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55.
· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 212.40- Days to Ship: 4 Day(s) or more -
2-Blade Pin Angle Sander EM Long
WIDIN
[Features]
· Long two-blade pin square sander EM.
· Supports flexible material and aluminum alloy.Standard Price: MYR 142.99- Days to Ship: 5 Day(s) or more -
4-Blade Pin Square Sander, EM Long
WIDIN
[Features]
· Long four-blade pin square sander EM.
· Supports flexible material and aluminum alloy.Standard Price: MYR 209.84- Days to Ship: 6 Day(s) or more -
MHRLN230-6 MUGEN-COATING Long Neck End Mill ø6 Shank Diameter Type (For Deep Ribbing)
NS TOOL
[Features]
· NS original deep ribbing end mill with MUGEN coating applied.
· Neck relief type suitable for narrow deep processing.Standard Price: MYR 377.81- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | NACHI | OSG | OSG | NS TOOL | NS TOOL | OKAZAKI SEIKO | VAN_HOORN | VAN_HOORN | WIDIN | WIDIN | NS TOOL |
| Product Series | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS | ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | MHRLN230-6 MUGEN-COATING Long Neck End Mill ø6 Shank Diameter Type (For Deep Ribbing) | ||||||||
| CAD |
|
|
| ||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more |
| Blade diameter (D)(φ) | 0.5 ～ 2.5 | 0.1 ～ 6 | 0.7 ～ 5 | 1 ～ 6 | 1 ～ 10 | 0.1 ～ 6 | 1 ～ 10 | 3 ～ 20 | 0.8 ～ 3 | 0.4 ～ 2 | 3 ～ 20 | 5 ～ 16 | 0.3 ～ 2 |
| Blade length (ℓ)(mm) | 0.7 ～ 3.7 | 0.15 ～ 9 | 1 ～ 7.5 | 1.5 ～ 9 | 1.5 ～ 15 | 0.15 ～ 9 | 1.5 ～ 15 | 15 ～ 80 | 1.2 ～ 3 | 0.6 ～ 3 | 15 ～ 130 | 25 ～ 80 | 0.4 ～ 3 |
| Underneck length (ℓ1)(mm) | 2.5 ～ 12.5 | 0.3 ～ 60 | 6 ～ 35 | 5 ～ 30 | 4 ～ 80 | 0.3 ～ 60 | 4 ～ 80 | - | - | - | - | - | 3 ～ 15 |
| Shank diameter (d)(mm) | 6 | 4 ～ 6 | 4 ～ 6 | 6 | 4 ～ 10 | 4 ～ 6 | 4 ～ 10 | 6 ～ 20 | 6 | 6 | 3 ～ 20 | 6 ～ 16 | - |
| Number of flutes(sheet) | 2 | 2 | 2 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | - | - | - |
| Overall Length (L)(mm) | 60 | 45 ～ 120 | 45 ～ 80 | 60 ～ 90 | 45 ～ 150 | 45 ～ 120 | 50 ～ 150 | 70 ～ 150 | 64 | 64 | 60 ～ 250 | 100 ～ 200 | - |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | - | - | Side / Groove / Plunging (Z feed) | Side / Groove / Plunging (Z feed) | Plane / Side / Groove |
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Sharp Edge | - | - | Sharp Edge | Sharp Edge | - |
| Type | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | High Helical | High Helical | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.1～0.95
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
-
1～1.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12
-
14
-
16
-
18
-
20
-
25
-
30
-
32
-
35
-
40
-
45
-
50
-
-
Blade length (ℓ)(mm)
-
0.08～0.9
- 0.08
- 0.1
- 0.12
- 0.15
- 0.2
- 0.25
- 0.3
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.8
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
-
3～3.8
- 3
- 3.2
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
-
4～4.8
- 4
- 4.5
- 4.8
-
5～5.5
- 5
- 5.25
- 5.3
- 5.4
- 5.5
-
6～6.25
- 6
- 6.25
-
7～7.5
- 7
- 7.2
- 7.5
-
8
-
9
-
10
-
11
-
12～12.5
- 12
- 12.5
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
24
-
25
-
26
-
30
-
32
-
35
-
36
-
38
-
40
-
45
-
46
-
48
-
50
-
55
-
56
-
60
-
64
-
65
-
70
-
75
-
80
-
85
-
100
-
115
-
125
-
130
-
150
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- OSG (4)
- NS TOOL (3)
- VAN_HOORN (2)
- WIDIN (2)
- NACHI (1)
- OKAZAKI SEIKO (1)
- SPEED TIGER (0)
- GUHRING (0)
- UNION TOOL (0)
- KYOWA SEIKO (0)
CAD
-
- 2D
- 3D
Related Categories to Long Neck Square End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy