(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Square End Mills (Carbide)（Machining Application：Groove Page6）
| Days to Ship |
|
|---|
-
TAC2 Long 2-Flute A Cut End Mill MA
ASAHI TOOLS
The long blade enables deep cutting. Uses an MA tip suitable for steel machining
Standard Price: MYR 1,345.59 Days to Ship: 4 Day(s) or more -
TAL2, 2-flute, Alumik 2000 End Mill AH10
ASAHI TOOLS
Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.
Standard Price: MYR 551.78- Days to Ship: 4 Day(s) or more -
BED2 Brazed Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Standard Price: MYR 919.00- Days to Ship: 14 Day(s) -
SAD2 Square End Mill for Aluminum, 2-Flute, Non-Coated
OKAZAKI SEIKO
Endmill for aluminum with sharp corners and a blade for aluminum.
Standard Price: MYR 151.45- Days to Ship: 14 Day(s) -
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Standard Price: MYR 243.50- Days to Ship: 14 Day(s) -
SED2 Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
Standard Price: MYR 147.11- Days to Ship: 5 Day(s) or more -
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Standard Price: MYR 147.11- Days to Ship: 9 Day(s) or more -
SED2MA Medium Square End Mill, 2-Flute, OK Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Standard Price: MYR 212.78- Days to Ship: 9 Day(s) or more -
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Standard Price: MYR 68.06- Days to Ship: 5 Day(s) or more -
DZ-COAT Solid End Mill, DZ-DES2-L Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 387.13 Days to Ship: 5 Day(s) or more -
Solid End Mill for Aluminum Machining AL-SEES3-XLS-R02 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 424.68- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 576.88- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 404.69- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 201.87- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 457.27- Days to Ship: 7 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 290.92- Days to Ship: 7 Day(s) or more -
Solid one cut end mill DZ-OCEL4
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 446.00 Days to Ship: 5 Day(s) or more -
DIJET
[Features]
· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.Standard Price: MYR 499.55- Days to Ship: 14 Day(s) -
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel, and other workpieces, medium type, 2 flutes.
MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Applications]
Suitable for finishing of general steel, stainless steel, aluminum, etc.Standard Price: MYR 128.88- Days to Ship: 10 Day(s) -
Focus on Accuracy / Finished Surface 4FESM
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel, and other workpieces, 4 flutes.
The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
It can perform drilling and chamfer at the same time.
[Applications]
Suitable for finishing of general steel, stainless steel, aluminum, etc.Standard Price: MYR 149.14- Days to Ship: 6 Day(s) or more -
Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel, and other workpieces, 3 flutes.
The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Applications]
Suitable for automatic lathe finishing of general steel, stainless steel, aluminum, etc.Standard Price: MYR 131.71- Days to Ship: 6 Day(s) or more -
Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel, and other workpieces, 4 flutes.
The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Applications]
Suitable for automatic lathe finishing of general steel, stainless steel, aluminum, etc.Standard Price: MYR 129.63- Days to Ship: 6 Day(s) or more -
Axel Mill, 3-D High Efficiency Type, 3ZFKS (short)
KYOCERA
One unit supports three machining applications: thrust machining, grooving, and finishing.
Standard Price: MYR 318.88- Days to Ship: 6 Day(s) or more -
Axel Mill, 3-D High Efficiency Type, 3ZFKM (medium)
KYOCERA
One unit supports three machining applications: thrust machining, grooving, and finishing.
Standard Price: MYR 259.23- Days to Ship: 6 Day(s) or more -
Axel Mill, High Feed High Efficiency Type, 4MFK (square type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.
Standard Price: MYR 267.90- Days to Ship: 6 Day(s) or more -
Axel Mill, High Feed High Efficiency Type, 4MFR (radius type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.
Standard Price: MYR 321.25- Days to Ship: 6 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 687.36- Days to Ship: 7 Day(s) or more -
PCD 2-Flute Spiral Square End Mill DSE-2
KYOWA SEIKO
The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.
Standard Price: MYR 3,359.42- Days to Ship: 7 Day(s) or more -
Carbide End Mill with 2 Flutes for Resin Processing PSE-2
KYOWA SEIKO
[Features]
A medium flute length end mill for resin machining, 2 flutes.
This product alone can be used to edge a workpiece because of its square shape.
[Applications]
Suitable for slab milling, side milling, grooving, plunging (Z feed), ramping, and spot facing.Standard Price: MYR 204.20- Days to Ship: 6 Day(s) or more -
Carbide End Mill for Rib for Resin Processing PRE-2
KYOWA SEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.
Standard Price: MYR 238.63- Days to Ship: 6 Day(s) or more -
Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
KYOWA SEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / CountersinkingStandard Price: MYR 251.54- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes KSET-2
KYOWA SEIKO
[Features]
A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
The high cutting speed and high production efficiency lead to overall production cost reduction.
[Applications]
Suitable for slab milling, side milling, grooving, plunging (Z feed), ramping, and spot facing.Standard Price: MYR 333.33- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner C Face KSC-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 290.29- Days to Ship: 5 Day(s) or more -
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 285.98- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Solid Blades KSEA-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 290.29- Days to Ship: 6 Day(s) or more -
Carbide Miniature End Mill with 4 Flutes KMSEA-4
KYOWA SEIKO
[Features]
A carbide miniature end mill suitable for general steel, stainless steel, and other workpieces, 4 flutes.
The AlTiN-based coating provides high durability and abrasion resistance.
The high cutting speed and high production efficiency lead to overall production cost reduction.Standard Price: MYR 415.12- Days to Ship: 6 Day(s) or more -
Carbide Miniature End Mill KMSE‐2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 277.37- Days to Ship: 5 Day(s) or more -
Carbide Miniature End Mill KMSEA-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 333.33- Days to Ship: 5 Day(s) or more -
Carbide End Mill for Rib KRE-2
KYOWA SEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
Standard Price: MYR 238.63- Days to Ship: 5 Day(s) or more -
SPSEE3ZA
OKAZAKI SEIKO
A non-stepped vertical feed reinforced end mill that enables vertical feeding going straight on to grooving.
Standard Price: MYR 160.28- Days to Ship: 14 Day(s) -
SPSEE4GA
SP Series Steel Power Mill 4 Flutes / OK coated OKAZAKI SEIKO
End mill with a unique reinforced blade type with good chip discharge properties that enables heavy duty cutting and high speed machining.
Standard Price: MYR 169.01- Days to Ship: 14 Day(s) -
CoroMill Plura End Mill For Roughing R216
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: MYR 4,154.33- Days to Ship: 10 Day(s) -
CoroMill Plura End Mill for Rough Machining, Weldon Shank
SANDVIK
Sandvik Carbide Roughing Square End Mill CoroMill Plura End Mill for Roughing Weldon Shank
Standard Price: MYR 686.48- Days to Ship: 7 Day(s) or more -
CoroMill Plura End Mill For Roughing, With Lubrication Hole R215.34 (Hardness < 28 HRC)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: MYR 810.30- Days to Ship: 10 Day(s) -
CoroMill Plura End Mill For Finishing R215 (Hardness 43 HRC Min. / 63 HRC Max.)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: MYR 602.20- Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | DIJET | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW | Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW | Axel Mill, High Feed High Efficiency Type, 4MFK (square type) | Axel Mill, High Feed High Efficiency Type, 4MFR (radius type) | Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC | CoroMill Plura End Mill For Roughing, With Lubrication Hole R215.34 (Hardness < 28 HRC) | CoroMill Plura End Mill For Finishing R215 (Hardness 43 HRC Min. / 63 HRC Max.) | ||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 14 Day(s) | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 14 Day(s) | 14 Day(s) | 10 Day(s) | 7 Day(s) or more | 10 Day(s) | 10 Day(s) |
| Blade diameter (D)(φ) | 22 | 14 ～ 50 | 20 ～ 50 | 1 ～ 12 | 1 ～ 12 | 0.4 ～ 32 | 1 ～ 12 | 1 ～ 12 | 1 ～ 25 | 2.5 | 6 ～ 22 | 2 ～ 30 | 3 ～ 25 | 1 ～ 30 | 3 ～ 25 | 3 ～ 30 | 3 | 4 ～ 16 | 0.9 ～ 3 | 1 ～ 16 | 3 ～ 13 | 3 ～ 13 | 6 ～ 12 | 3 ～ 16 | 3 ～ 16 | 3 ～ 16 | 10.5 ～ 60 | 0.2 ～ 6 | 0.2 ～ 6 | 0.3 ～ 5 | 1 ～ 16 | 0.1 ～ 6 | 1 ～ 6 | 3 ～ 6 | 1 ～ 4 | 0.5 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.2 ～ 6 | 2 ～ 20 | 3 ～ 20 | 16 ～ 25 | 6 ～ 25 | 6 ～ 20 | 5 ～ 20 |
| Blade length (ℓ)(mm) | 60 | 25 ～ 60 | 32 ～ 63 | 3 ～ 32 | 3 ～ 32 | 1 ～ 55 | 4 ～ 36 | 4 ～ 36 | 2.5 ～ 45 | 20 | 9 ～ 33 | 10 ～ 80 | 20 ～ 80 | 3 ～ 60 | 20 ～ 80 | 10 ～ 60 | 20 | 16 ～ 55 | 2 ～ 10 | 2.5 ～ 32 | 3 ～ 8 | 3 ～ 8 | 9 ～ 18 | 6 ～ 35 | 4.5 ～ 48 | 8 ～ 35 | 20 ～ 70 | 0.2 ～ 3 | 0.6 ～ 21 | 0.6 ～ 10 | 2 ～ 32 | 0.2 ～ 13 | 3 ～ 13 | 10 ～ 15 | 1 ～ 40 | 1 ～ 8 | 0.2 ～ 8 | 0.2 ～ 8 | 0.3 ～ 9 | 4 ～ 40 | 10 ～ 45 | 32 ～ 45 | 13 ～ 45 | 7 ～ 38 | 13 ～ 38 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | 40 ～ 125 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 25 | 16 ～ 32 | 20 ～ 42 | 4 ～ 12 | 4 ～ 12 | 4 ～ 32 | 4 ～ 12 | 4 ～ 12 | 4 ～ 25 | 4 | 5 ～ 20 | 4 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 | 4 ～ 16 | 4 ～ 6 | 4 ～ 16 | 4 ～ 13 | 4 ～ 13 | 6 ～ 12 | 6 ～ 16 | 6 ～ 16 | 6 ～ 16 | 12 ～ 42 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 16 | 3 ～ 6 | 4 ～ 6 | 6 | 4 ～ 6 | 3 | 3 | 3 | 4 ～ 6 | 4 ～ 20 | 6 ～ 20 | 16 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 3 | 4 | 3 | 3 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 3 | 4 | 6 ～ 8 | 4 ～ 5 | 4 | 6 ～ 16 |
| Overall Length (L)(mm) | 130 | 95 ～ 160 | 115 ～ 160 | 45 ～ 75 | 45 ～ 75 | 45 ～ 130 | 45 ～ 75 | 45 ～ 75 | 45 ～ 120 | 55 | 100 ～ 250 | 140 ～ 250 | 60 ～ 150 | 45 ～ 130 | 60 ～ 150 | 45 ～ 130 | 60 | 60 ～ 130 | 45 ～ 50 | 45 ～ 90 | 35 ～ 45 | 45 | 50 ～ 75 | 50 ～ 90 | 60 ～ 110 | 60 ～ 110 | 80 ～ 170 | 50 ～ 60 | 45 ～ 100 | 45 ～ 100 | 45 ～ 100 | 40 ～ 50 | 40 ～ 50 | 50 | 50 ～ 80 | 60 | 40 | 50 | 40 ～ 120 | 45 ～ 105 | 45 ～ 105 | 92 ～ 156 | 57 ～ 125 | 54 ～ 104 | 57 ～ 104 |
| work material | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | - | - | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Cast Iron[○] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Titanium[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | DLC | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | - | Non-Coated | Non-Coated | Non-Coated | DLC | TiCN | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | TiAlN | TiAlN | TiCN | TiCN | TiCN | TiCN |
| Blade tip shape | With Lead | Sharp Edge | C plane | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Micro R | Sharp Edge | C plane | C plane | C plane | C plane | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | C plane | - | Sharp Edge | Sharp Edge | - | Sharp Edge | C plane | Sharp Edge | - | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | - | - | - | - | - | - |
| Type | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
63
-
65
-
67
-
70～70.50
- 70
- 70.50
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[5-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- NS TOOL (69)
- OSG (57)
- NACHI (26)
- ASAHI TOOLS (14)
- 7 LEADERS (13)
- KYOWA SEIKO (13)
- DIJET (10)
- OKAZAKI SEIKO (10)
- THE_CUT (10)
- KYOCERA (9)
- SANDVIK (9)
- EIKOSHA (6)
- SANKO MFG (4)
- GCT (2)
- SPEED TIGER (2)
- SUMITOMO_ELEC_ (2)
- UNION TOOL (2)
- WIDIN (1)
- PROCHI (0)
- ATOM (0)
- TOYO DRILL (0)
- VAN_HOORN (0)
- TAIYO-TOOL (0)
- MAPAL (0)
- GUHRING (0)
CAD
-
- 2D
- 3D
Related Categories to Square End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy