(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Square End Mills (Carbide)（Machining Application：Side Page6）
| Days to Ship |
|
|---|
-
MUGEN-COATING PREMIUM 2-Flute LEAD 35 End Mill MXH235
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. Resolves the problem of a blade length too short at 2x and too long at 4x
Standard Price: MYR 83.28- Days to Ship: 5 Day(s) or more -
MUGEN-COATING PREMIUM 2-Flute LEAD 40 End Mill MXH240
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. Deep processing is smooth, and deflection of machining surface has been minimized while employing a long blade
Standard Price: MYR 120.91- Days to Ship: 4 Day(s) or more -
MUGEN-COATING PREMIUM 2-Flute LEAD 45 End Mill MXH245
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. Deflection of machining surfaces has been minimized while employing an extra-long blade
Standard Price: MYR 166.17- Days to Ship: 10 Day(s) -
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is the same as the blade diameter and the torsion angle is 25°
Standard Price: MYR 83.28- Days to Ship: 4 Day(s) or more -
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 30 End Mill MXH230P
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is 2x the blade diameter and the torsion angle is 30°
Standard Price: MYR 83.28- Days to Ship: 5 Day(s) or more -
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is 3x the blade diameter and the torsion angle is 35°
Standard Price: MYR 87.02- Days to Ship: 10 Day(s) -
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces
· Uses Chip-Resistant, High-Toughness Carbide Material
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistanceStandard Price: MYR 185.49- Days to Ship: 5 Day(s) or more -
MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel
NS TOOL
Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection
Standard Price: MYR 372.80- Days to Ship: 11 Day(s) -
MUGEN-COATING 4-Flute End Mill MSE445
NS TOOL
Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion
Standard Price: MYR 181.96- Days to Ship: 10 Day(s) -
MUGEN-COATING 2-Flute End Mill MSE245
NS TOOL
Adopts a unique Infinity coating for 2-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion
Standard Price: MYR 181.21- Days to Ship: 8 Day(s) or more -
Ultra-Fine Machining End Mill Micro Edge NSME230
NS TOOL
Carbide precision specification, blade diameter tolerance ±2 μm, shank tolerance h3 (roundness 0.1 μm)
Standard Price: MYR 434.96- Days to Ship: 11 Day(s) -
Carbide Graphite Solid End Mill 2-Flute, Standard Type
EIKOSHA
Carbide graphite solid end mill suitable for graphite electrode machining, 2-flute standard type.
[Features]
·Wear-resistant material is used.Standard Price: MYR 443.93- Days to Ship: 4 Day(s) or more -
Carbide Graphite Solid End Mill 2-Flute, Long Type
EIKOSHA
GEL2, Carbide Graphite Solid End Mill (Long 2NT) [Machining Application (Processing Shape)]: Plane/Side/Groove/Counter Facing, [Tool Material]: Carbide [Work Material]: Aluminum/Copper/Graphite [Number of Flutes (Pcs.)] 2 [Helix Angle]: Standard Twist (30 to 44°) [Corner Shape]: Shape corner
Standard Price: MYR 857.94- Days to Ship: 4 Day(s) or more -
Carbide Graphite Solid End Mill 4-Flute, Standard Type
EIKOSHA
Right Blade Right Helix Angle 30°, Number of Blades: 4 pcs., KO3, standard type "helix angle" standard twist (30 to 44°)
Standard Price: MYR 487.48- Days to Ship: 4 Day(s) or more -
Carbide Graphite Solid End Mill 4-Flute, Long Type
EIKOSHA
GEL4, right blade helix angle 30°, number of flutes: 4, KO3, long type "helix angle" standard helix (30 to 44°), "processing application (processing shape)": plane/side surface/groove/counterbore, "tool material": carbide
Standard Price: MYR 941.42- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 327.45- Days to Ship: 4 Day(s) or more -
HGGCNV2T HG Coated Carbide NewVictory 2-Flute Blade
SANKO MFG
Machining is possible with a wide range of materials, from raw materials to hardened steel.
[Features]
· A general-purpose 2-flute type with pin angle specification.
· Excellent chip discharge.Standard Price: MYR 91.54- Days to Ship: 7 Day(s) or more -
SAGC2T SA Coating Carbide 2-Flute Short Flute
SANKO MFG
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· A general-purpose 2-flute type with pin angle specification.Standard Price: MYR 188.27- Days to Ship: 5 Day(s) or more -
DLGCAL2T DL-Coating 2-Flute Carbide for Aluminum
SANKO MFG
DLC coating provides excellent abrasion resistance and surface lubricity, preventing weld adhesion. Ideal for machining aluminum.
Standard Price: MYR 242.35- Days to Ship: 7 Day(s) or more -
GCAL2T 2-Flute Carbide for Aluminum Use
SANKO MFG
As high torsion reduces the cutting resistance and the chip pocket is wide, it is ideal for processing aluminum.
Standard Price: MYR 181.19- Days to Ship: 7 Day(s) or more -
Router for CFRP Cross-flute Router_DIA-DCR
OSG
Diamond coated mesh router. Bottom edge is of end mill specification.
Standard Price: MYR 601.34- Days to Ship: 5 Day(s) or more -
Solid Spiral End Mill SSM4000 Type
SUMITOMO_ELEC_
Standard type of SSM type.
Machining Application (Processing Shape) Side/Groove
Tool material: Carbide
Work Material 1/Cast Iron/Aluminum
Coating: Uncoated
Standard/alteration category, manufacturer's standard product, Number of flutes (pcs.): 4
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)Standard Price: MYR 248.26 Days to Ship: 5 Day(s) or more -
Long Blade Square End Mill 2 Blades
ATOM
Abundant blade length variation that allows the optimal blade length to be selected. Ideal for resin modeling and non-ferrous component machining.
Standard Price: MYR 302.76- Days to Ship: 4 Day(s) or more -
Small Diameter Square End Mill, 2-Flute
ATOM
Ideal for precise machining of precision molds and precision parts. New φ0.05 to φ0.09 sizes have been added to the standard product inventory.
Standard Price: MYR 274.99- Days to Ship: 4 Day(s) or more -
Standard Square End Mill, 2-Flute
ATOM
[Features]
· Supports a wide range of applications, from general steel to nonferrous metals and resins.Standard Price: MYR 240.05- Days to Ship: 4 Day(s) or more -
Standard Square End Mill, 4-Flute
ATOM
Supports a wide range of applications, from general steel to nonferrous metals and resins. High rigidity 4-flute supports grooving to side surface machining.
Standard Price: MYR 273.64- Days to Ship: 4 Day(s) or more -
SAC2 Solid 2-Blade A Cut End Mill MA
ASAHI TOOLS
Incredibly abrasion-resistant ultrafine particle carbide alloy enables wide-width and dry machining of a variety of materials, from cast iron to alloy steel, with further extended tool life through the use of cutting fluid.
Standard Price: MYR 198.97- Days to Ship: 4 Day(s) or more -
SAC2 Solid Long 2-Blade A Cut End Mill MA
ASAHI TOOLS
Longer blade than the Solid 2-flute A Cut EM, making it ideal for deep cutting and deep step machining. Capable of processing with deep steps.
Standard Price: MYR 384.67- Days to Ship: 4 Day(s) or more -
SAC4 Solid 4-Blade A Cut End Mill MA
ASAHI TOOLS
Incredibly abrasion-resistant ultrafine particle carbide alloy optimizes performance in wide-width side machining of a variety of materials, from cast iron to alloy steel.
Standard Price: MYR 268.60- Days to Ship: 4 Day(s) or more -
TAC2, 2-flute, A-cut End Mill G2
ASAHI TOOLS
It has a wide chip space and excellent chip discharge performance. Adopts a G2 specification tip suitable for cast iron and nonferrous metal machining.
Standard Price: MYR 384.67- Days to Ship: 4 Day(s) or more -
TAC2 Long 2-Flute A Cut End Mill G2
ASAHI TOOLS
The long blade enables deep cutting. Adopts a G2 specification tip suitable for cast iron and nonferrous metal machining.
Standard Price: MYR 746.75- Days to Ship: 4 Day(s) or more -
TAC4, 4-flute, A-cut End Mill MA
ASAHI TOOLS
Ideal for improving efficiency in side milling.
·Machining applications (machining shape): side milling / slotting
·Materials: Carbide
·Work material: general steel / heat-treated steel / stainless steel / cast iron / aluminum / copper / resin
・ Coating: UncoatedStandard Price: MYR 746.75- Days to Ship: 4 Day(s) or more -
SAL2 Solid Alumic 2000 End Mill AH10
ASAHI TOOLS
Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.
Standard Price: MYR 393.94- Days to Ship: 4 Day(s) or more -
ASAHI TOOLS
Adopts an AH10 (K type) tip suitable for cast iron and nonferrous metals. 30° torsion blade reduces pre-cut resistance during side surface machining.
Standard Price: MYR 653.91- Days to Ship: 4 Day(s) or more -
UEM Long Ultra 30 End Mill AH10
ASAHI TOOLS
Adopts an AH10 (K type) tip suitable for cast iron and nonferrous metals. Seamless long blade specifications.
Standard Price: MYR 964.93- Days to Ship: 4 Day(s) or more -
LSU Long Shank Ultra 30 End Mill AH10
ASAHI TOOLS
Long underneck: Ideal for end milling in deep areas. Tip material is a G2 tip suitable for cast iron and nonferrous metals.
Standard Price: MYR 867.44- Days to Ship: 4 Day(s) or more -
LSU Special Long Shank Ultra 30 End Mill AH10
ASAHI TOOLS
Long underneck: Ideal for end milling in deep areas. Tip material is a G2 tip suitable for cast iron and nonferrous metals.
Standard Price: MYR 1,094.91- Days to Ship: 4 Day(s) or more -
TAC2, 2-flute, A-cut End Mill MA
ASAHI TOOLS
It has a wide chip space and excellent chip discharge performance. Uses an MA tip suitable for steel machining.
Standard Price: MYR 384.67- Days to Ship: 4 Day(s) or more -
TAC2 Long 2-Flute A Cut End Mill MA
ASAHI TOOLS
The long blade enables deep cutting. Uses an MA tip suitable for steel machining
Standard Price: MYR 1,345.59 Days to Ship: 4 Day(s) or more -
TAL2, 2-flute, Alumik 2000 End Mill AH10
ASAHI TOOLS
Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.
Standard Price: MYR 551.78- Days to Ship: 4 Day(s) or more -
BPD4 Brazed Square End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Standard Price: MYR 1,405.93- Days to Ship: 14 Day(s) -
SAD2 Square End Mill for Aluminum, 2-Flute, Non-Coated
OKAZAKI SEIKO
Endmill for aluminum with sharp corners and a blade for aluminum.
Standard Price: MYR 151.45- Days to Ship: 14 Day(s) -
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Standard Price: MYR 243.50- Days to Ship: 14 Day(s) -
SED2 Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
Standard Price: MYR 147.11- Days to Ship: 5 Day(s) or more -
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Standard Price: MYR 147.11- Days to Ship: 9 Day(s) or more
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | OSG | SUMITOMO_ELEC_ | ATOM | ATOM | ATOM | ATOM | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO |
| Product Series | MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P | MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 30 End Mill MXH230P | MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P | SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated | |||||||||||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 11 Day(s) | 10 Day(s) | 8 Day(s) or more | 11 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 5 Day(s) or more | 9 Day(s) or more |
| Blade diameter (D)(φ) | 0.1 ～ 6 | 0.3 ～ 6 | 0.3 ～ 6 | 0.1 ～ 6 | 0.1 ～ 6 | 0.1 ～ 6 | 1 ～ 20 | 5 ～ 12 | 2 ～ 12 | 2 ～ 12 | 0.03 ～ 0.09 | 0.5 ～ 25 | 1.2 ～ 25 | 3 ～ 25 | 3 ～ 25 | 4 ～ 25 | 1 ～ 12 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3.175 ～ 6.35 | 3 | 1 ～ 3 | 0.05 ～ 0.95 | 1 ～ 12 | 1 ～ 12 | 1 ～ 30 | 3 ～ 20 | 3 ～ 20 | 10 ～ 60 | 10 ～ 50 | 15 ～ 50 | 3 ～ 13 | 13 ～ 50 | 13 ～ 50 | 13 ～ 40 | 13 ～ 40 | 10 ～ 40 | 22 | 14 ～ 50 | 20 ～ 50 | 1 ～ 12 | 1 ～ 12 | 0.4 ～ 32 | 1 ～ 12 |
| Blade length (ℓ)(mm) | 0.3 ～ 18 | 1.2 ～ 24 | 1.5 ～ 30 | 0.1 ～ 6 | 0.2 ～ 12 | 0.3 ～ 18 | 1.5 ～ 40 | 10 ～ 30 | 5 ～ 30 | 5 ～ 30 | 0.045 ～ 0.135 | 5 ～ 60 | 20 ～ 80 | 20 ～ 60 | 30 ～ 80 | 20 ～ 60 | 3 ～ 24 | 2 ～ 45 | 3 ～ 38 | 3 ～ 38 | 10 ～ 19 | 8 | 5 ～ 30 | 0.1 ～ 2.5 | 3 ～ 25 | 3 ～ 25 | 3 ～ 40 | 20 ～ 70 | 8 ～ 40 | 20 ～ 70 | 30 ～ 150 | 25 ～ 60 | 8 ～ 25 | 20 ～ 50 | 43 ～ 103 | 20 ～ 50 | 20 ～ 50 | 20 ～ 50 | 60 | 25 ～ 60 | 32 ～ 63 | 3 ～ 32 | 3 ～ 32 | 1 ～ 55 | 4 ～ 36 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 80 ～ 150 | 120 ～ 200 | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 | 4 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 3.175 ～ 6.35 | 6 | 4 | 3 | 4 ～ 12 | 4 ～ 12 | 6 ～ 30 | 6 ～ 20 | 6 ～ 20 | 12 ～ 42 | 12 ～ 42 | 16 ～ 42 | 6 ～ 12 | 12 ～ 42 | 12 ～ 42 | 16 ～ 42 | 16 ～ 42 | 12 ～ 32 | 25 | 16 ～ 32 | 20 ～ 42 | 4 ～ 12 | 4 ～ 12 | 4 ～ 32 | 4 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 6 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | - | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 45 ～ 60 | 45 ～ 65 | 45 ～ 75 | 45 ～ 50 | 45 ～ 50 | 45 ～ 60 | 50 ～ 125 | 60 ～ 80 | 45 ～ 80 | 45 ～ 80 | 45 | 50 ～ 160 | 120 ～ 250 | 90 ～ 160 | 120 ～ 250 | 60 ～ 160 | 45 ～ 75 | 50 ～ 115 | 40 ～ 100 | 40 ～ 100 | 38.1 ～ 63.5 | 45 | 40 ～ 70 | 40 | 40 ～ 75 | 40 ～ 75 | 45 ～ 100 | 60 ～ 140 | 45 ～ 100 | 70 ～ 160 | 80 ～ 250 | 80 ～ 160 | 45 ～ 80 | 100 ～ 170 | 125 ～ 225 | 140 ～ 270 | 180 ～ 320 | 70 ～ 130 | 130 | 95 ～ 160 | 115 ～ 160 | 45 ～ 75 | 45 ～ 75 | 45 ～ 130 | 45 ～ 75 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[◎] | - | general steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Standard torsion (30-40°) | - | - | - | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | TiAlN | TiAlN | TiAlN | Non-Coated | - | - | - | - | - | For General Steels (AlCrN, etc.) | TiAlN | DLC | - | Dia Coat | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated |
| Blade tip shape | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | C plane | With Lead | C plane | Sharp Edge | Sharp Edge | Sharp Edge | C plane | C plane | C plane | With Lead | Sharp Edge | C plane | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | High Helical | High Helical | Roughing | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square |
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
63
-
65
-
67
-
70～70.50
- 70
- 70.50
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[4-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- NS TOOL (74)
- OSG (60)
- NACHI (28)
- ASAHI TOOLS (14)
- 7 LEADERS (13)
- KYOWA SEIKO (13)
- OKAZAKI SEIKO (13)
- THE_CUT (11)
- KYOCERA (9)
- EIKOSHA (6)
- ATOM (5)
- DIJET (4)
- SANKO MFG (4)
- SANDVIK (4)
- GCT (2)
- SPEED TIGER (2)
- UNION TOOL (2)
- SUMITOMO_ELEC_ (1)
- WIDIN (1)
- PROCHI (0)
- TOYO DRILL (0)
- VAN_HOORN (0)
- TAIYO-TOOL (0)
- MAPAL (0)
- GUHRING (0)
CAD
-
- 2D
- 3D
Related Categories to Square End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy