(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Square End Mills（Machining Application：Plane Page6）
[What is a carbide square end mill?]
A type of milling cutter. It is a tool that can perform complicated shaping such as linear or non-linear side surfaces inside grooves and holes, by using a carbide base material, with a cutting edge on the outside or the end surface, and moving the rotated tool in multiple directions. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry.
Search by specifying the lower class category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
Micro Grain Carbide High Helix End Mills Short_MG-EHS
OSG
[Notice] Alteration can be specified. Please select from "Standard / alteration classification" of the narrowing conditions.
50° helix angleStandard Price: MYR 486.22- Days to Ship: 5 Day(s) or more -
WXS Coated Multiple Flutes Short Super_FXS-CR-EMS
OSG
High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.
Standard Price: MYR 451.77- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills Multiple Flutes Short_NEO-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Standard Price: MYR 445.20- Days to Ship: 4 Day(s) or more -
WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS
OSG
Long shank end mill with extremely high tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.
Standard Price: MYR 579.49- Days to Ship: 5 Day(s) or more -
WXS Coated Multiple Flutes Long Super_FXS-EML
OSG
Long blade end mill with superb tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.
Standard Price: MYR 1,022.09- Days to Ship: 5 Day(s) or more -
Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS
OSG
Short-blade, long-neck type end mill with ultra-smooth DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.
Standard Price: MYR 371.35- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.Standard Price: MYR 87.49- Days to Ship: 5 Day(s) or more -
2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS
OSG
Short blade with long neck shape and high rigidity that enables high efficiency, high precision machining even with large blade exposure. Ideal for high-speed / high-precision machining of copper electrodes.
Standard Price: MYR 371.43- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS
OSG
End mill with diamond coating dedicated for graphite.
Standard Price: MYR 778.59- Days to Ship: 5 Day(s) or more -
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 416.59- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.Standard Price: MYR 132.49- Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS
OSG
A long-neck 4-flute end mill that supports processing in narrow and deep spaces. Bottom blade is of a specification that increases the strength of the corner portions.
Standard Price: MYR 262.38- Days to Ship: 5 Day(s) or more -
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_b$)
HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]
UNION TOOL
[Features]
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity, enabling deep rib milling of high-hardness materials
· High Accuracy: O.D. Tolerance: 0/-0.01 (D ≤ 0.15), 0/-0.015 (D ≥ 0.2)
· The refined shape improves the fracture resistance and the synergistic effect with HARDMAX coating ensures long product lifeStandard Price: MYR 99.02- Days to Ship: 5 Day(s) or more -
HLS4000 HM Coated 4-Flute Long Neck Square
UNION TOOL
[Features]
· Unequal division
· θ1 > θ2: Variable split suppresses chatter vibration and tool damage
· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.
· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.
· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity
· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracyStandard Price: MYR 141.40- Days to Ship: 5 Day(s) or more -
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_b$)
C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 60.22- Days to Ship: 6 Day(s) or more -
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 2-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 60.22- Days to Ship: 6 Day(s) or more -
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_b$)
C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]
UNION TOOL
[Features]
· Ideal for deep grooving thanks to the undercut processing of the main partStandard Price: MYR 116.70- Days to Ship: 5 Day(s) or more -
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_b$)
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 97.30- Days to Ship: 5 Day(s) or more -
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_b$)
C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 4-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 97.30- Days to Ship: 6 Day(s) or more -
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_b$)
CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]
UNION TOOL
[Features]
· End Mill for Aluminum Machining
· Adopts 45° torsion for a blade shape with excellent sharpness and chip dischargeStandard Price: MYR 102.60- Days to Ship: 5 Day(s) or more -
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_b$)
AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]
UNION TOOL
[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat landStandard Price: MYR 173.11- Days to Ship: 6 Day(s) or more -
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]
UNION TOOL
[Features]
· End Mill Dedicated for Graphite Machining
· Adopts a carbide base material with excellent wear resistance
· The shape helps prevent chippingStandard Price: MYR 588.06- Days to Ship: 10 Day(s) -
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
CPS 2-Flute Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Medium Blade Length End Mill for Resin Processing
· Unique blade shape
· Blade Length = 3x Outer Diameter (Some 1.5x/2x)
· An excellent machined surface can be obtained, even for long resin protrusion machiningStandard Price: MYR 113.12- Days to Ship: 6 Day(s) or more -
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_b$)
CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Long Neck / Long Shank Square End Mill for Resin Processing
· Adopts a long shank to support deep groove machining of objects with long projections
· Exhibits excellent sharpness in resin processingStandard Price: MYR 176.69- Days to Ship: 6 Day(s) or more -
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_b$)
CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Long Neck End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck partStandard Price: MYR 148.41- Days to Ship: 6 Day(s) or more -
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_b$)
CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting qualityStandard Price: MYR 102.19- Days to Ship: 7 Day(s) or more -
CRN-ES4000 For Copper Electrode Processing, 4-Flute, Square
UNION TOOL
[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting quality
· O.D. Tolerance: 0/-0.02 (D ≤ 6), 0/-0.03 (D ≥ 8)Standard Price: MYR 136.26- Days to Ship: 7 Day(s) or more -
SSF120 CBN Super Surface End Mill
NS TOOL
Idea for reference surface protrusion machining during microfabrication. Adopts a unique shape and corner rounding to achieve a stable machined surface
Standard Price: MYR 829.38- Days to Ship: 11 Day(s) -
NS TOOL
Sharp edge achieved by matching NS machining technology with carefully selected CBN material
- CAD ：
- 2D
Standard Price: MYR 1,281.55- Days to Ship: 11 Day(s) -
AL2D-2 Aluminum-Only End Mill (2x Blade Length Type)
NS TOOL
High rigidity type with excellent cost performance
Standard Price: MYR 109.61- Days to Ship: 1 Day(s) or more -
AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)
NS TOOL
Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining
Standard Price: MYR 174.75- Days to Ship: 10 Day(s) -
AL5D-2 Aluminum-Only End Mill (5x Blade Length Type)
NS TOOL
Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining
Standard Price: MYR 279.21- Days to Ship: 10 Day(s) -
AL3D-2DLC Aluminum-Only End Mill (DLC Coating)
NS TOOL
Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining
Standard Price: MYR 211.36- Days to Ship: 10 Day(s) -
NEA-2 Aluminum (Non-Ferrous) End Mill【1-183 Pieces Per Package】
NS TOOL
Machines using a wide chip pocket and sharp cutting quality.
Standard Price: MYR 290.11- Days to Ship: 5 Day(s) or more -
AL-3LS Long Shank End Mill for Aluminum (Under-Shank)
NS TOOL
A slim type with a narrower shank than the blade diameter, supporting vertical wall processing
Standard Price: MYR 373.58- Days to Ship: 10 Day(s) -
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum
NS TOOL
Capable of stable high efficiency machining under all conditions. High-efficiency heavy cutting type with enhanced chip discharge performance
Standard Price: MYR 185.56- Days to Ship: 9 Day(s) or more -
NS TOOL
The blade length is the same as the blade diameter and the torsion angle is 25°. Weak torsion angle minimizes workpiece deflection
Standard Price: MYR 160.26- Days to Ship: 5 Day(s) or more -
NS TOOL
The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing
Standard Price: MYR 127.58- Days to Ship: 5 Day(s) or more -
NS TOOL
The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining
Standard Price: MYR 167.58- Days to Ship: 5 Day(s) or more -
NS TOOL
The blade length is 4x the blade diameter and the torsion angle is 40°. Strong torsion angle enables smooth chip discharge
Standard Price: MYR 233.95- Days to Ship: 5 Day(s) or more -
NS TOOL
The blade length is 5x the blade diameter and the torsion angle is 45°. Features excellent sharpness enabling deep side cutting
Standard Price: MYR 356.11- Days to Ship: 5 Day(s) or more -
NHR-2 Long Neck End Mill (for Deep Ribs)
NS TOOL
Neck relief type suitable for narrow deep processing.
Standard Price: MYR 203.80- Days to Ship: 10 Day(s) or more -
MHRH230 2-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Standard Price: MYR 127.58- Days to Ship: 10 Day(s) or more -
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy
Standard Price: MYR 245.36- Days to Ship: 10 Day(s) or more -
MHRH430 4-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Standard Price: MYR 186.90- Days to Ship: 10 Day(s)
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_b$)
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_b$)
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_b$)
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_b$)
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_b$)
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_b$)
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_b$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_b$)
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_b$)
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS | Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | 2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS | Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS | Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS | ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS | HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product] | C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product] | C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product] | C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product] | C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product] | C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product] | CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product] | AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product] | CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product] | CPS 2-Flute Square for Resin Machining [Alteration Supported Product] | CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product] | CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product] | CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product] | NEA-2 Aluminum (Non-Ferrous) End Mill【1-183 Pieces Per Package】 | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) | 11 Day(s) | 1 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) |
| Blade diameter (D)(φ) | 6 ～ 25 | 1.5 ～ 30 | 6 ～ 25 | 3 ～ 30 | 6 ～ 25 | 0.5 ～ 6 | 0.1 ～ 12 | 0.5 ～ 12 | 1 ～ 6 | 1 ～ 6 | 1 ～ 10 | 1 ～ 10 | 0.1 ～ 6 | 1 ～ 6 | 0.1 ～ 20 | 0.2 ～ 12 | 0.2 ～ 6 | 1 ～ 20 | 1 ～ 12 | 0.5 ～ 12 | 1 ～ 12 | 2 ～ 10 | 0.3 ～ 12 | 0.5 ～ 4 | 0.5 ～ 6 | 1 ～ 12 | 3 ～ 6 | 0.2 ～ 2 | 0.03 ～ 0.1 | 0.5 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 3 ～ 6 | 5 ～ 12 | 1 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 0.5 ～ 11.9 | 0.5 ～ 11.9 | 0.5 ～ 5 | 0.1 ～ 3 | 1 ～ 4 | 1 ～ 6 |
| Blade length (ℓ)(mm) | 13 ～ 45 | 5 ～ 55 | 12 ～ 50 | 10 ～ 55 | 25 ～ 90 | 0.7 ～ 9 | 0.15 ～ 18 | 0.7 ～ 18 | 2 ～ 12 | 1.5 ～ 9 | 1.5 ～ 15 | 1.5 ～ 15 | 0.1 ～ 9 | 1 ～ 6 | 0.15 ～ 48 | 0.3 ～ 36 | 0.3 ～ 9 | 2.5 ～ 48 | 2.5 ～ 26 | 0.75 ～ 30 | 2 ～ 24 | 15 ～ 45 | 0.9 ～ 36 | 1 ～ 8 | 1 ～ 12 | 3 ～ 40 | 9 ～ 18 | 0.1 ～ 1 | 0.03 ～ 0.1 | 1 ～ 24 | 3 ～ 36 | 5 ～ 60 | 3 ～ 36 | 10 ～ 30 | 7.5 ～ 18 | 1.5 ～ 18 | 0.5 ～ 12 | 1 ～ 24 | 1.5 ～ 36 | 2 ～ 47.6 | 2.5 ～ 59.5 | 0.7 ～ 7.5 | 0.08 ～ 4.5 | 2 ～ 8 | 0.8 ～ 9 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 2.5 ～ 30 | 0.3 ～ 60 | 2.5 ～ 60 | 5 ～ 60 | 5 ～ 30 | 4 ～ 80 | 4 ～ 80 | 0.3 ～ 60 | 4 ～ 50 | - | - | 0.5 ～ 60 | - | - | - | 3 ～ 50 | - | - | 4 ～ 40 | 2 ～ 63 | - | - | 0.5 ～ 5 | - | - | - | - | - | - | - | 3 ～ 36 | - | - | - | - | - | 2 ～ 40 | 0.3 ～ 50 | - | 4 ～ 50 |
| Shank diameter (d)(mm) | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 | 4 ～ 12 | 6 ～ 12 | 4 ～ 6 | 6 | 4 ～ 10 | 4 ～ 10 | 4 ～ 6 | 4 ～ 6 | 3 ～ 20 | 4 ～ 12 | 4 ～ 6 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 10 | 3 ～ 12 | 4 ～ 6 | 3 ～ 6 | 4 ～ 12 | 6 | 4 | 4 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 4 ～ 10 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 6 | 4 ～ 6 | 6 | 4 ～ 6 |
| Number of flutes(sheet) | 3 ～ 4 | 4 ～ 8 | 6 | 4 ～ 8 | 6 ～ 8 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 3 | 4 | 2 | 2 | 2 | 2 | 4 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 |
| Overall Length (L)(mm) | 50 ～ 120 | 60 ～ 140 | 50 ～ 120 | 80 ～ 200 | 70 ～ 165 | 60 ～ 90 | 45 ～ 140 | 60 ～ 140 | 50 ～ 100 | 60 ～ 90 | 45 ～ 150 | 45 ～ 150 | 45 ～ 120 | 50 ～ 110 | 38 ～ 110 | 45 ～ 90 | 45 ～ 120 | 45 ～ 110 | 45 ～ 75 | 45 ～ 90 | 60 ～ 110 | 60 ～ 180 | 45 ～ 100 | 80 ～ 100 | 38 ～ 120 | 45 ～ 100 | 50 ～ 60 | 50 | 50 | 45 ～ 80 | 45 ～ 90 | 50 ～ 110 | 45 ～ 90 | 50 ～ 70 | 80 ～ 150 | 45 ～ 80 | 40 ～ 70 | 40 ～ 75 | 40 ～ 85 | 45 ～ 105 | 40 ～ 110 | 35 ～ 90 | 45 ～ 100 | 60 | 50 ～ 110 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | Aluminum[◎] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) |
| Machining Application | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane |
| Coating | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | DLC | For General Steels (AlCrN, etc.) | CrN | DG | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | CrN | CrN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Blade tip shape | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Micro R | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead |
| Type | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square |
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_c$)
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_c$)
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_c$)
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_c$)
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_c$)
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_c$)
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_c$)
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_c$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_c$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_c$)
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_c$)
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_c$)
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5H
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7H
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9H
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11H
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13H
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14H
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15H
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16H
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17H
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18H
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19H
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20H
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.58
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
62
-
63
-
64
-
65
-
66
-
67
-
70～70.50
- 70
- 70.50
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
115
-
120
-
125
-
130
-
150
-
200
[4-75/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- NS TOOL (84)
- OSG (71)
- OKAZAKI SEIKO (37)
- SANDVIK (35)
- NACHI (29)
- UNION TOOL (23)
- 7 LEADERS (16)
- KYOWA SEIKO (14)
- KYOCERA (12)
- SANKO MFG (12)
- EIKOSHA (8)
- ATOM (5)
- ASAHI TOOLS (3)
- GUHRING (1)
- PROCHI (0)
- TOYO DRILL (0)
- SUMITOMO_ELEC_ (0)
- TAIYO-TOOL (0)
- THE_CUT (0)
- DIJET (0)
- GCT (0)
- SPEED TIGER (0)
- VAN_HOORN (0)
- WIDIN (0)
- MAPAL (0)
CAD
-
- 2D
- 3D
Related Categories to Carbide Square End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy