(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Liquid Feeder Equipment（Product Type：Liquid feeding tube）
| Days to Ship |
|
|---|
-
Fluororesin Tube Internal Diameter x External Diameter (mm) 0.46x0.92 – 8.0x10.0
CHUKOH
Features outstanding heat resistance, lack of adhesion, high electrical insulation, chemical resistance, and slipperiness.
Standard Price: MYR 43.38- Days to Ship: 5 Day(s) or more -
NIREI INDUSTRY
Has high dimensional accuracy as well as superior pressure resistance and chemical resistance.
Standard Price: MYR 533.75- Days to Ship: 9 Day(s) or more -
AS ONE
· Because of the shielding effect of the conductive PFA part (the outer surface), dielectric breakdown of the tube and the related risk of ignition, which is due to spark discharge, or discharge within an electrically insulating atmosphere, can be prevented.
· As PFA-HG material has been used for the wetted part, there is little elution of fluorine ions in the liquid.
· The conductive part is striped, so the interior fluid status can be checked.Standard Price: MYR 375.80 Days to Ship: 20 Day(s) or more -
Clean Pack PFA Tube (10 m Roll)
SANPLATEC
[Features]
· A PFA tube washed with pure water (cleanliness: class 1,000) in a clean room and doubly packed under an environment of class 100 or less.Standard Price: MYR 1,836.98- Days to Ship: 20 Day(s) or more -
Fluororesin Tube Internal Diameter x External Diameter (mm) 2X4 – 10X12
TRUSCO NAKAYAMA
Uses fluororesin (PFA) which boasts outstanding heat resistance and chemical resistance. The inner surface is smooth and non-adhesive, so it resists staining, and is excellent in terms of hygiene. A coupling tube for use in corrosion-resistant environments.
Standard Price: MYR 273.03- Days to Ship: 9 Day(s) or more -
AS ONE
· Great high temperature mechanical strength and sturdy with regard to bending fatigue.
· Features low permeation resistance and can be used as a hose for halogen gases such as chlorine, etc.
· A pure fluororesin tube. Contains no additives such as filler or plasticizer.Standard Price: MYR 635.96 Days to Ship: 9 Day(s) or more -
Naflon® PTFE Tube (Metric Size)
AS ONE
· Great high temperature mechanical strength and sturdy with regard to bending fatigue.
· Features low permeation resistance and can be used as a hose for halogen gases such as chlorine, etc.Days to Ship: 5 Day(s) or more -
AS ONE
[Features]
· Great high temperature mechanical strength and sturdy with regard to bending fatigue.
· Features low permeation resistance and can be used as a hose for halogen gases such as chlorine, etc.Days to Ship: 9 Day(s) or more -
AS ONE
Pure fluororesin tube that does not contain any fillers or plasticizers.
[Features]
·Liquid feeder equipment with excellent chemical, heat and weather resistance.
·Excellent non-adhesiveness, so dirt and scale do not easily adhere.
·Deterioration of electrical characteristics is extremely small at high temperatures and high humidity.
[Applications]
·Ideal for electrical insulation.Days to Ship: 9 Day(s) or more -
AS ONE
[Features]
·This is a pure fluororesin tube containing no fillers or plasticizers.
·It has excellent chemical resistance, heat resistance, and weather resistance.
·It has excellent non-adhesiveness and is resistant to dirt and scale.
·It is suitable for electrical insulation applications because it exhibits very little deterioration in electrical properties in high temperature, high humidity, and high frequency regions.
[Applications]
·Suitable for electrical insulation applicationsDays to Ship: 9 Day(s) or more -
NAFLON PFA-HG Tube (Inch Size)
AS ONE
· Eluted fluorine ions are reduced.
· The inner surface of the tube has been smoothed (Rt = 0.2 μm).
· It has reduced the accumulation of particles and chemicals.
· Reduces cleaning time.
· Superior transparency and dielectric strength.
· Reduces the amount of chemical liquid permeation by reducing the surface area inside the tube.
· It improves stress crack resistance under stressful environments (e.g. sulfuric acid hydrogen peroxide or fuming sulfuric acid).Standard Price: MYR 215.40- Days to Ship: 5 Day(s) or more -
Naflon® PFA-AS Tube (Inch Size)
AS ONE
· Striped conductive PFA is provided in the inner and outer layers of the tube.
· Equipped with an antistatic function, it prevents tube dielectric breakdown due to frictional electrification with fluids.
· Prevents tube insulation breakdowns due to organic solvents, fuel, refrigerants, powder, and vapor.Standard Price: MYR 1,389.27 Days to Ship: 9 Day(s) or more -
AS ONE
· Has high dimensional accuracy as well as superior pressure resistance and chemical resistance.
· Excellent flame retardant properties (UL94 V-O, low outgassing).
· Features excellent acid and alkali resistance at high temperatures.
· It has excellent hydrolytic stability and is not chemically affected even in water at high temperature or high pressure.Standard Price: MYR 804.31- Days to Ship: 8 Day(s) or more -
AS ONE
· Suitable for HPLC piping.
· As the inner surface of the tube is smooth and non-adhesive, it has dirt resistant properties.
· It is transparent, allowing the state of the interior to be seen.Standard Price: MYR 793.79- Days to Ship: 8 Day(s) -
Tube For Liquid Feeding, NAFLON BT Tube
AS ONE
· More flexible, easier to bend, and transparent compared to regular PTFE tubing.
· Withstands almost all chemicals.
· Excellent non-adhesiveness and washing is easy.Standard Price: MYR 118.51- Days to Ship: 17 Day(s) or more -
SANPLATEC
[Features]
· The BT tube is a PTFE-made tube with thick tube walls.
· Particularly excellent flexibility and transparency.
· Continuous use temperature is 260°C.Standard Price: MYR 919.80- Days to Ship: 37 Day(s) -
SANPLATEC
[Features]
· Excellent non-stickiness, dirt and scale do not easily adhere.
· Since the deterioration of electrical characteristics is extremely small in high temperature, high humidity and high frequency regions,
it is suitable for insulation uses.
· Excellent weather resistance.
· Maximum operating temperature is 260°C, but in the case of continuous operation, operating at 201°C or lower is recommended for safety.
· PFA tubes are transparent in comparison to PTFE tubes.Standard Price: MYR 398.83- Days to Ship: 15 Day(s) or more -
Clean Pack PFA Tube (Inch-Sized) (10 m Roll)
SANPLATEC
[Features]
· A PFA tube washed with pure water (cleanliness: class 1,000) in a clean room and doubly packed under an environment of class 100 or less.Standard Price: MYR 1,996.26- Days to Ship: 37 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Flow rate range(ml/min) |
| Size(mm) |
| Inner Diameter × Outer Diameter(mm) |
| Overall Length(m) |
| Operating Pressure(mpa) |
| Compatible Tube Outer Diameter(mm) |
| Screw Size |
| Other |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CHUKOH | NIREI INDUSTRY | AS ONE | SANPLATEC | TRUSCO NAKAYAMA | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | SANPLATEC | SANPLATEC | SANPLATEC |
| Product Series | Fluororesin Tube Internal Diameter x External Diameter (mm) 0.46x0.92 – 8.0x10.0 | Fluororesin Tube Internal Diameter x External Diameter (mm) 2X4 – 10X12 | ||||||||||||||||
| Days to Ship | 5 Day(s) or more | 9 Day(s) or more | 20 Day(s) or more | 20 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 17 Day(s) or more | 37 Day(s) | 15 Day(s) or more | 37 Day(s) |
| Product Type | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube |
| Flow rate range(ml/min) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Inner Diameter × Outer Diameter(mm) | 0.46×0.92 ～ 8.0×10.0 | 0.13×(1/16) ～ 1.00×(1/16) | 2×3 | - | 2X4 ～ 10X12 | 4×6 | 0.5×1.0 ～ 49×53 | 2×3 ～ 10×12 | 3.17×6.35 ～ 9.52×12.7 | 1.59×3.17 ～ 10.7 ×12.7 | 2.17×3.17 ～ 3.96×6.35 | 4.35×6.35 | 0.025x0.794 ～ 1.0x1.588 | 0.5x1.588 ～ 1.00x1.588 | φ2×φ4 ～ φ7×φ10 | - | - | - |
| Overall Length(m) | 10 | 10 | 10 | 10 | 10 ～ 20 | 11 | - | - | - | - | 10 | 10 | - | - | - | 10 | 10 | 10 |
| Operating Pressure(mpa) | 0.82 ～ 3.27 | 24 ～ 34 | - | - | 0.75 ～ 3 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Tube Outer Diameter(mm) | - | - | - | 3 ～ 14 | - | - | - | - | - | - | - | - | - | - | - | 3.17 ～ 12.7 | 3.17 ～ 12.7 | 3.17 ～ 19.05 |
| Screw Size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
- Dispenser
- Fluid feed pump
- Liquid feeding tube
- Spiral Tube
- Tube joint
- Tubing pump
- Handy Pump
- Other
-
Flow rate range(ml/min)
-
Size(mm)
- ø30×30×2
- Approx. 35 × 32 × 80
- ø 45×216
- ⌀47 × 254 (Trap part)
- ø 48×250
- ⌀48 × 250 (bottom size: 80 × 80) mm
- ø 50×216
- 51×101×149
- 69.2×50.0×73.5
- 70×45×48
- 78×55×52
- 80×42×86
- 82×82×128
- 88×40×15
- 97×97×171
- 100×67×140
- 115×178.5×153.5
- 118.4×118.4×191
- 129×202×192
- 129×276×192
- 129×276×195
- 135×91×146
- 201×81×92
- 241×177×204
-
Inner Diameter × Outer Diameter(mm)
- 0.025x0.794
- 0.065x0.794
- 0.1x0.794
- 0.125x0.794
- 0.13×(1/16)
- 0.13x1.588
- 0.17×(1/16)
- 0.17x1.588
- 0.175x0.794
- 0.2x0.794
- 0.25x0.794
- 0.25×(1/16)
- 0.25x1.588
- 0.46×0.92
- 0.5x0.794
- 0.5×1.0
- 0.50×(1/16)
- 0.5×1.5
- 0.5x1.588
- 0.56×1.06
- 0.68×1.18
- 0.7×1.7
- 0.75×(1/16)
- 0.75x1.588
- 0.8×1.4
- 0.8×4.1
- 0.86×1.46
- 0.9×1.7
- 0.96×1.56
- 1.00×(1/16)
- 1.0x1.588
- 1.00x1.588
- 1 x 3
- 1.0X3.0
- 1.07×1.67
- 1.19×1.79
- 1.35×1.95
- 1.5×2.5
- 1.59×3.17
- 1.6×4.9
- 2×3
- 2.0×3.0
- 2X4
- 2×4
- φ2×φ4
- 2.17×3.17
- 2.5×3.5
- 3×4
- 3.0×4.0
- 3×5
- 3×8
- 3.1×6.5
- 3.17×6.35
- 3.96×6.35
- 4×5
- 4.0×5.0
- 4X6
- 4×6
- 4.0×6.0
- φ4×φ6
- 4×10
- 4.35×6.35
- 4.8×8.1
- 4.8×9.8
- 5×6
- 5×7
- 6X8
- 6×8
- 6.0×8.0
- 6×12
- 6.35×9.52
- 6.4×9.7
- 6.4×11.4
- 7×9
- φ7×φ10
- 7.52×9.52
- 7.9×11.3
- 7.9×13
- 8×9
- 8X10
- 8×10
- 8.0×10.0
- 8×17
- 9×10
- 9×12
- 9.52×12.7
- 9.7×14.6
- 10×11
- 10X12
- 10×12
- 10.7 ×12.7
- 11×12
- 11×13
- 12×13
- 12×14
- 12.5×14
- 12.7×26
- 13×15
- 13×16
- 14×16
- 15×17
- 16×17.5
- 16×18
- 16×19
- 19×21
- 20×23
- 21.5×23.5
- 22×24
- 23×25
- 23×27
- 25×27
- 25×28
- 26×29
- 27.5×29.5
- 33×36
- 36×45
- 39×42
- 46×50
- 49×53
-
Overall Length(m)
-
Operating Pressure(mpa)
-
Compatible Tube Outer Diameter(mm)
-
Screw Size
- R 1/4
- R 1/8
- R 3/8
- R 1/2
- R 3/4
- Other
-
Other
- Option
Narrow search by specifying Manufacturer
-
- AS ONE (11)
- SANPLATEC (4)
- CHUKOH (1)
- NIREI INDUSTRY (1)
- TRUSCO NAKAYAMA (1)
- MUSASHI_ (0)
- FLONCHEMICAL (0)
- HAKKOH (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy