[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Interface Terminal Blocks (Round/Y Terminal Types)（Supported equipment manufacturer：KEYENCE）

The interface terminal block (round / spade terminal type) is a component for wiring connections that combines a connector and a small circuit board terminal block. It is mainly used to connect a PLC, etc., and to reduce the size of the control panel. There are two types of crimp terminals: a basic round type and a Y type that can be removed simply by loosening the screws. The connector types are divided into MIL, FCN, MR, Centronics, etc. Terminal block screws include M3, M3.5, etc. The mounting method can be selected from direct mounting and mounting on a DIN rail. Since the terminal pitch, compatible devices, and representative standards differ depending on the product, it is necessary to select an appropriate interface terminal block (round / spade terminal type) according to the application. There are also support screw type products that can keep the screws loosened, and products that allow you to select a name plate.

9 items

: 30; 45; 60

Days to Ship	All 1 Day(s) or Less 2 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal

MISUMI

A 34-position MIL connector terminal block equipped with a KV-Nano series name plate that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

Volume Discount

Connection in Boards
Space-saving
PLC
125 V

CAD ：: 2D / 3D

Standard Price:	MYR 121.80-
Days to Ship:	1 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Terminal Block, PCN Series

TOYOGIKEN

[Features]
· The width of the main body is 40 mm in comparison to a DIN rail width of 35 mm.
· Boasts an even slimmer finish.
· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
· The terminal number and connector number are wired 1-to-1.
· Circuits can be freely designed.
· Improves workability when using new screw types.
· If using a fork type terminal, the PCN series is without doubt the most effective option.
· A lever type which enables neat and tidy removal from rails.
· No tools required for removal, and so no need for wasted space on the backside of the main body.
· Compatible with both rail mounting and direct mounting.

CAD ：: 2D

Standard Price:	MYR 196.05-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Terminal Block, PCN7 Series

TOYOGIKEN

An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.

[Features]
· An ultra small size with a pitch between terminals of just 7 mm.
· Ideal for size reducing PLC or SBC interfaces.
· A compact type for helping reduce the size of control panels.
· The connector and terminal block are easy-to-handle 1:1 wire connection types.
· Uses SS terminal screws for easy wiring.
· Structured to prevent screws from dropping out and becoming lost.
· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
· Compatible with both DNI rail mounting and direct mounting methods.

CAD ：: 2D

Standard Price:	MYR 162.33-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Connector Terminal Block for Control Panels, PM-32 Series

WAGO

[Features]
● Proven results. A best selling connector terminal block.
● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.
● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.
● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.
● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.
● For using fewer parts. No stopper required for aluminum DIN rails

Standard Price:	MYR 276.57
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels

WAGO

[Features]
● Simple to use. 1-to-1 circuit
● Industry standard. Connector: MIL, FCN (AMP)
● Wide product lineup. Terminal blocks with a pitch of 3.5 mm or 5 mm
● New to the product lineup. The "-KV" for KEYENCE PLC CPUs is also available
● Improved reliability. Features a cage clamp connection that is strong against vibration.

Standard Price:	MYR 268.12
Days to Ship:	10 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade

MISUMI

This is a terminal block equipped with a MIL socket connector, allowing lower stage wiring without upper stage terminal wiring getting in the way. You can choose a machine name plate. Every 6th bulkhead shape and a triangle mark support number recognition.

Volume Discount

c-UL
Space-saving
Sensor
PLC
125 V

CAD ：: 2D

Standard Price:	MYR 180.07-
Days to Ship:	1 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type

WAGO

Standard Price:	MYR 259.51
Days to Ship:	10 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

PM-601 Series (Sensor / Actuator Station)

WAGO

[Features]
● Direct coupling to PLC via straight connection cables.
● Even if the PLC changes, the signal and common terminal block placement remain the same.
● An ultra small connector terminal block with a horizontal width of 95/77 mm.
● A 739 cage clamp terminal block with a pitch of 3.5 mm.
● Boasts a wire connection range of 0.08 to 1.5 mm2. Even ultra thin sensor wire can be connected directly.
● The signal and common terminal blocks are colored to make them easier to differentiate.
● With common power supply terminal blocks, power can be passed horizontally with adjacent connector terminal blocks.
● The circuit aligns with the PLC pin layout for products from various manufacturers.
● The terminal block features an IP20 finger protection structure.
● No stopper required for aluminum DIN rails.

Standard Price:	MYR 302.55-
Days to Ship:	10 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

OMRON

Connector terminal block conversion units designed specifically to connect PLCs.
[Features]
・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout
・ The name paper of the terminal block will be the PLC address
・ Connection method is cross-head screw type, straight-slot screw type, push-in type
・ Available with and without power supply terminal
・ The operability of the push-in terminal has been improved, making it even easier to use
・ Connection work has become smoother with a terminal arrangement that takes workability into consideration
・ It can be mounted with DIN rail and screws
・ With a common design, it can be customized
・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates
・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference
[Applications]
・ Convert various input devices such as sensors into connectors and use them for PLC input

Standard Price:	MYR 131.26
Days to Ship:	12 Day(s) or more

"Same Day Ship Out" is available for item with 1 day


Brand
Product Series
CAD
Days to Ship
Specifications
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)


Brand	MISUMI	TOYOGIKEN	TOYOGIKEN	WAGO	WAGO	MISUMI	WAGO	WAGO	OMRON
Product Series	MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal	Terminal Block, PCN Series	Terminal Block, PCN7 Series	Connector Terminal Block for Control Panels, PM-32 Series	IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels	MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade	Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type	PM-601 Series (Sensor / Actuator Station)	Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)
CAD	2D / 3D	2D	2D			2D
Days to Ship	1 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	10 Day(s) or more	1 Day(s) or more	10 Day(s) or more	10 Day(s) or more	12 Day(s) or more
Specifications	Connection in Boards Space-saving PLC 125 V					c-UL Space-saving Sensor PLC 125 V
Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector
Number of Poles(Pole)	26 ～ 40	26 ～ 34	26 ～ 40	32	40	34 ～ 40	32	16	40
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	With DIN rail	DIN rail/Direct attachment	With DIN rail	With DIN rail	Other
Supported equipment manufacturer	KEYENCE	KEYENCE	KEYENCE	KEYENCE	KEYENCE	KEYENCE	KEYENCE	KEYENCE	KEYENCE
Pitch Between Terminals(mm)	7	7.62	7	3.5	3.5	7	3.5	3.5	7
Supported equipment	PLC	Other	PLC	PLC	PLC	PLC	PLC	PLC	-
Dimension width(mm)	96 ～ 146	109 ～ 140	100 ～ 149	42	77	129 ～ 150	77	95	151.7
Terminal Block Screw	M3	M3	M3	-	-	M3	-	-	Other
Representative Standard	-	UL / CUL / TUV	UL / CUL / TUV	-	-	CUL	-	-	-
Dimension vertical(mm)	42	40	40	48.5	38.3	41.5	41.3	41.3	48.35
Dimension depth(mm)	51	36.8	36.8	85	55	42.5	55	55	50

Configure

Specification/Dimensions

Connector
- MIL Connector
- FCN Connector
- MR connector
- D-sub connector
- Centronics Connector
- MDR connector
- Other
Clear

Number of Poles(Pole)
10

15

16

20

24

25

26

32

34

36

37

40

50

68

96
Clear

Mounting Method
- Direct attachment
- With DIN rail
- DIN rail/Direct attachment
- Other
Clear

Supported equipment manufacturer
- Mitsubishi Electric
- Omron
- YASKAWA ELECTRIC
- Panasonic Electronic Works
- KEYENCE
Clear

Pitch Between Terminals(mm)
3.5

5

7

7.62

7.7

8.5
Clear

Supported equipment
- PLC
- Servo Motor
- I/O board
- Other
Clear

Dimension width(mm)
31.5

41.8

42

46

48

52

55

57

63

70

72.5

74

76

77

79

80

81.7

82.2

86

89.5

95

96

96.5

98.5

100

101.21

102

108

109

125

128

129

130.7

132

135

138.5

139.31

140

146

149

150

151.7

158.4

160

162

180

180.5

181

184

185

186.7

200

202.5

219.55

247.5
Clear

Terminal Block Screw
- M3
- M3.5
- Other
Clear

Representative Standard
- CE
- UL
- CUL
- TUV
- CSA
Clear

Dimension vertical(mm)
22.6

27.1

27.3

31.1

33.4

38.3

40

41.3

41.5

41.6

42

42.8

43.2

43.3

43.8

44.3

47

48.35

48.5

49

50.7

54.8

59

64

83

86

160
Clear

Dimension depth(mm)
35.5

36

36.5

36.8

39

40.3

42

42.3

42.4

42.5

43

45

47.6

48

50

51

54.8

55

57

85

144
Clear

Narrow search by specifying Manufacturer

- MISUMI (2)
- Economy series (0)
- WAGO (4)
- TOYOGIKEN (2)
- OMRON (1)
- KASUGA (0)
- YOSHIDADENKI (0)
Clear

CAD

- 2D
- 3D
Clear

How can we improve?

Interface Terminal Blocks (Round/Y Terminal Types)（Supported equipment manufacturer：KEYENCE）

Configure

Specification/Dimensions

Connector

Number of Poles(Pole)

Mounting Method

Supported equipment manufacturer

Pitch Between Terminals(mm)

Supported equipment

Dimension width(mm)

Terminal Block Screw

Representative Standard

Dimension vertical(mm)

Dimension depth(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Interface Terminal Blocks (Round/Y Terminal Types)

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm