(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
PLC (Wire-Saving Dedicated Units)（Representative Standard：CSA）
| Days to Ship |
|
|---|
-
Standard Price: MYR 2,056.62- Days to Ship: 5 Day(s) or more -
OMRON
A remote I/O terminal that realizes high-speed communication for various purposes.
[Features]
·Digital I/O terminal: Executes input/output of digital ON/OFF signals.
·Equipped with a detachable screw terminal block for improved maintainability.
·Expansion units can be installed (one expansion unit can be installed per unit).
·The input response time can be switched to achieve high-speed processing.
[Applications]
·Remote I/O terminal for EtherCAT.Standard Price: MYR 1,548.30- Days to Ship: 5 Day(s) or more -
MECHATROLINK-II supported position control unit CJ1W-NC□71
OMRON
MECHATROLINK-II Compatible Position Control Unit CJ1W-NC□71
Standard Price: MYR 4,195.49- Days to Ship: 5 Day(s) or more -
Ether CAT supported position control unit CJ1W-NC□81 / NC□82
OMRON
EtherCAT Compatible Position Control Unit CJ1W-NC□81/NC□82
Standard Price: MYR 5,881.98- Days to Ship: 5 Day(s) or more -
OMRON
Smart slave, board-type PLC (dedicated wiring-saving unit).
[Features]
·It can easily support various I/O interfaces and realizes reduced wiring.
·The DRT2-□D32BV (-1) type can be easily attached to a printed circuit board created by the user with screws.
·I/O terminal: MIL connector type.
·Internal circuit power supply rated voltage: Supplied from communication connector.
·Rated voltage of I/O power supply: 24 V DC.Standard Price: MYR 1,768.62- Days to Ship: 9 Day(s) or more -
OMRON
Smart slave DRT2
[Features]
· Equipped with industry standard e-CON connectors and easily connects to cable pull-out type sensors without special tools.
· Equipped with functions common to smart slaves in order enable provide effective assistance for the monitoring of equipment operating conditions, as well as effective maintenance.
· A digital input terminal compatible with industry standard e-CON connectors.
· Construction can be performed easily without special tools.
· Reduces wiring man-hours.
· Equipped with a load short circuit detection function.Standard Price: MYR 946.03- Days to Ship: 5 Day(s) or more -
OMRON
Flexible, application-based I/O configurations are possible, which contribute to reductions in board size, cost, and wiring man-hours.
Standard Price: MYR 461.46 Days to Ship: 5 Day(s) or more -
OMRON
DeviceNet unit compatible with NJ series and CJ series.
[Features]
・ Achieves maximum 32,000 points (2,000 CH) / master control and guarantees data simultaneity
・ Equipped with master-slave functions, simultaneous operation is also possible
・ Equipped with various settings and monitor functions that take design efficiency and startup efficiency into consideration, and maximizes performance by using a configurator and CX-Integrator
・ Achieves improved debugging and startup efficiency, such as being able to download/upload master-slave configuration files to a memory cardStandard Price: MYR 2,920.36 Days to Ship: 5 Day(s) or more -
OMRON
Convert smart. Compute smartly. A simple and smart analog slave.
[Features]
·In addition to inputting and outputting analog data, analog I/O slaves can process various operations inside the unit, such as scaling functions, which conventionally had to be processed on the ladder program of the host PLC.
·Analog processing similar to that of a digital panel meter is possible by using calculation functions such as the scaling function.
·By using the differentiation/integration function, it is possible to perform analog integration processing such as equipment abnormality prediction and diversion.
·By using the user calibration function, it is possible to correct the "deviation" of the input value (or output value).
·The input (or output) range can be easily changed by simply setting the switch.Standard Price: MYR 1,809.82 Days to Ship: 5 Day(s) or more -
CompoNet bit slave (connector type) CRT1B-□D02JS(-1) / □D04JS(-1)
OMRON
CompoNet Bit Slave (Connector Type) CRT1B-□D02JS (-1) / □D04JS (-1)
Standard Price: MYR 551.51 Days to Ship: 9 Day(s) or more -
OMRON
OMRON Digital I/O Slave CRT1. Control network type: CompoNet, additional functions: Input/output, communication function
Standard Price: MYR 904.78- Days to Ship: 5 Day(s) or more -
CompoNet Temperature Input Slave CRT1-TS04T / -TS04P
OMRON
CompoNet Temperature Input Slave CRT1-TS04T / -TS04P
Standard Price: MYR 1,537.66- Days to Ship: 9 Day(s) or more -
OMRON
OMRON's DRT1 Communication Unit. Control network type: DeviceNet additional function: Input/output, communication function
Standard Price: MYR 1,233.87 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 1,814.44 Days to Ship: 5 Day(s) or more -
OMRON
Ultra-compact 16-point and 32-point remote terminals.
[Features]
·Realizes connection with various I/O interfaces in combination with an interface conversion board.
·Width 35 × depth 60 × height 80 mm.
[Applications]
·Terminal unit used for DeviceNet.Standard Price: MYR 1,172.62- Days to Ship: 5 Day(s) or more -
OMRON
A lineup of remote I/O terminals with high environmental resistance (IP67) and mixed input, output, and input/output types with an emphasis on economy.
[Features]
・ Abnormal diagnosis such as sensor power supply short circuit detection is also possible
・ Equipped with a common function for smart slaves, it strongly supports monitoring of the operating status of the device and effective maintenance
・ Achieves high environmental resistance dust-proof and drip-proof (IP67)
・ For input/output. PNP compatible (input (-) common / output (+) common). 8 points for input / 8 points for output
・ I/O connection form: Sensor I/O connector
・ Internal circuit power supply rated voltage: Supplied from communication connector
・ Rated voltage of I/O power supply: DC24VStandard Price: MYR 2,374.40 Days to Ship: 9 Day(s) or more -
Standard Price: MYR 1,814.44 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 770.45 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 798.78 Days to Ship: 5 Day(s) or more -
OMRON
Digital I/O unit compatible with multiple I/O terminals.
[Features]
·Lineup of terminal block type, connector type, and multi-point connector type.
·With the terminal block type, the circuit part can be detached. Maintenance can be performed without disconnecting the wiring.
·DIN rail mounting.
·Total external load current for GT1-OD16/GT1-OD32ML (-1): 4 A.
·GT1-OD16ML total external load current: 2.5 A.Standard Price: MYR 946.03- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 1,727.54 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 2,181.49 Days to Ship: 9 Day(s) or more -
OMRON
EtherCAT compatible analog I/O terminal with screw type terminal block.
[Features]
·The input range (or output range) can be easily changed by simply setting the switch.
·Equipped with a detachable screw-type terminal block for improved maintainability.
·Equipped with a moving average calculation function. Configurable from 100µs to 64 ms (input only).
·Wire break detection function (input only, when used with 1-5 V, 4-20 mA).
·Rotary switch setting and tool setting can be selected for the node address.
·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.Standard Price: MYR 2,419.24 Days to Ship: 5 Day(s) or more -
OMRON
EtherCAT-compatible encoder input terminal that achieves high-speed and accurate control.
[Features]
·Equipped with two counters. Counts pulses in a 32-bit range.
·The maximum input pulse frequency is 4 MHz (line driver input, multiplied by 4).
·High-speed and accurate control is possible with the ultra-high-speed network EtherCAT connection.
·You can choose from open collector input (GX-EC0211) or line driver input (GX-EC0241).
·Equipped with 2 external latch inputs and 1 reset input.
·Rotary switch setting and tool setting can be selected for the node address.
·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.
·Equipped with a detachable screw terminal block for improved maintainability.Standard Price: MYR 4,161.13 Days to Ship: 5 Day(s) or more -
OMRON
EtherCAT compatible screw type terminal block type high-speed digital I/O terminal.
[Features]
・ Equipped with a removable screw terminal block for improved maintainability
·Expansion unit can be installed. (One extension unit is installed per unit)
・ Flexible input/output points can be expanded according to the equipment
・ Input response time can be switched to achieve high-speed processing
・ Node address can be selected from rotary switch setting and tool setting
・ In the case of rotary switch setting, it can be set easily and node identification during maintenance is easyStandard Price: MYR 1,548.30 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 807.42- Days to Ship: 5 Day(s) or more -
OMRON
Expansion unit that allows easy expansion and various I/O combinations.
[Features]
·One extension unit can be combined with one digital I/O slave.
·Various I/O combinations such as 16 inputs and 8 outputs are possible, expanding the possibilities of system construction.
·The score can be flexibly expanded depending on the combination.
·The I/O detachable structure reduces start-up time and improves maintainability.
·It is possible to collect a variety of maintenance-related data necessary to improve productivity, such as aging equipment deterioration and equipment operation information.
[Applications]
·Expansion unit for CompoNet network.
·Used where additional I/O is required.Standard Price: MYR 822.59- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Control Type Network Varieties |
| Additional Function |
| Connection Terminal |
| Mounting Method |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Product Series | Ether CAT supported position control unit CJ1W-NC□81 / NC□82 | CompoNet bit slave (connector type) CRT1B-□D02JS(-1) / □D04JS(-1) | |||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Type | Slave station | Remote I/O station | - | - | Slave station | Slave station | Slave station | Master station | Slave station | Slave station | Slave station | Slave station | Slave station | Slave station | Slave station | Slave station | Slave station | - | Slave station | Slave station | Slave station | - | Remote I/O station | Remote I/O station | Remote I/O station | Slave station | - |
| Control Type Network Varieties | DeviceNet | EtherCAT | Other | EtherCAT | DeviceNet | DeviceNet | CompoNet | DeviceNet | CompoNet | CompoNet | CompoNet | CompoNet | DeviceNet | DeviceNet | DeviceNet | DeviceNet | DeviceNet | - | Other | DeviceNet | DeviceNet | DeviceNet | EtherCAT | EtherCAT | EtherCAT | EtherCAT | Other |
| Additional Function | Input/Output / Analog I/O / Communication Function | Input/Output / Communication Function | Communication Function | Communication Function / Control Function | Input/Output / Communication Function | Input/Output | Input/Output | Input/Output / Communication Function | Input/Output / Analog I/O / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Analog I/O / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output | Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output / Analog I/O / Communication Function | Input/Output / Communication Function | Input/Output / Communication Function | Input/Output | Input/Output / Communication Function |
| Connection Terminal | Connector | Terminal block/connector | Connector | Connector | - | Connector | - | Connector | Connector / Terminal block/connector | Connector | Connector / Terminal block/connector | Connector | Connector | Connector | Terminal block/connector | Connector | Connector | Connector | - | Connector / Terminal block/connector | Terminal block/connector | - | Terminal block/connector | Terminal block/connector | Terminal block/connector | Connector | - |
| Mounting Method | DIN mount | DIN mount | - | - | Screw mount | DIN mount / Screw mount / DIN mount combination | DIN mount | - | DIN mount / Screw mount / DIN mount combination | - | DIN mount / Screw mount / DIN mount combination | - | DIN mount | DIN mount | Screw mount / DIN mount combination | Screw mount | DIN mount | DIN mount | Screw mount / DIN mount combination | DIN mount | DIN mount | DIN mount | DIN mount | DIN mount | DIN mount | - | DIN mount |
| Representative Standard | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA |
Loading...
Configure
Specification/Dimensions
-
Type
- Master station
- Slave station
- Remote I/O station
- Bridge
- Repeater
- Other
-
Control Type Network Varieties
-
Additional Function
- Input/Output
- Analog I/O
- Communication Function
- Control Function
-
Connection Terminal
- Terminal Block
- Connector
- Terminal block/connector
- Other
-
Mounting Method
- Screw mount
- DIN mount
- Screw mount / DIN mount combination
-
Representative Standard
- CE
- UL
- CUL
- CSA
Narrow search by specifying Manufacturer
-
- OMRON (27)
- MITSUBISHI (0)
CAD
-
- 2D
- 3D
Related Categories to PLC (Wire-Saving Dedicated Units)
-
- PLC (CPU Units)
- PLC (Power Supply Units)
- PLC (Base Units)
- PLC (Software, Manuals)
- PLC Compatible Cables
- PLC Compatible Batteries
- PLC (Options, Others)
- PLC (Communication Units)
- PLC (Input/Output Units)
- PLC (Analog Units)
- PLC (Memory Units)
- PLC (Motion Controllers)
- PLC (Control Units)
- PLC (Wire-Saving Dedicated Units)
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy