(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Taper Gauge for Measuring Right Angles
Taper gauge enables measurement in locations where the scale markings cannot be viewed from above.
[Features]
· Dedicated inner width measurement taper gauge.
· Place one side along the measurement surface to enable stabler measurement than with an ordinary taper gauge.
· Measurement is possible in areas where scale markings cannot be viewed from above because the scale is located on the side.
[Applications]
· Used for measurement of grooves, gaps, etc.
Japanese Only
Part Number
Configured Part Number is shown.
TPG-700T
What is taper gauge
and diameter to indicate the width and section of diuerence of gap.
Instructions for use
graduation reading that’s without reach.
- For section of difference measuring, place gauge by the side with section of
difference horizontally for graduation reading at the same height.
| Part Number |
|---|
| TPG-700T |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
MYR 75.83 | 1 Piece(s) | 11 Day(s) |
Loading...
Basic Information
| Measuring Range(mm) | 1~15 | Scale | 0.1 | Product Dimension(mm) | 148.5 |
|---|---|---|---|---|---|
| Taper angle | 7°9' 10" | Mass(g) | 10 | Material | Quenched Stainless Steel (SUS420J2) |
| Instrument Error(mm) | ±0.05 | Feature 1 | · Dedicated taper gauge for internal measurements. Aligning one surface with the measurement surface facilitates more stable measurement than with ordinary taper gauges. · Since scale will be located on the side during measurement, measurement is possible in areas where scale markings cannot be viewed from above. | Use | Measurement of Slots, Gaps, Etc. |
Please check the type/dimensions/specifications of the part TPG-700T in the Taper Gauge for Measuring Right Angles series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cylindrical Taper Gauge
- Kaidan Scale Taper Gauge
- Center Gauge EA725SA-11
- Taper Gauge EA725SG-129
- (With Rules) Taper Gauge EA725SG-315
- Taper Gauge TPG-700A/700B/700C/700D: Includes Inspection Report / Calibration Certificate / Product Traceability Diagram
- Taper Gauge With KAIDAN Scale: Includes Inspection Report / Calibration Certificate / Product Traceability Diagram
- Short Taper Gauge
Customers Who Viewed This Item Also Viewed
-
stainless steel taper gaugeSINWASOKUTEI
Standard Price : MYR 35.21-
Days to Ship : 1 Day(s) or more
-
-
-
-
-
Taper Gauge - with Stepped Graduated ScaleNIIGATASEIKI
Standard Price : MYR 107.83
Days to Ship : 11 Day(s)
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy