(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Ceramic Limited Stopper Gauge H7 (for Construction Work)
Ceramic plug gauge has excellent durability that eliminates concerns about rust and corrosion on the measurement surface, and is exceptionally workable and economical.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time.
· No concerns about rust or corrosion on the measurement surface, with extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Measurement surface is nonmagnetic material that will not become magnetized.
· There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.
Japanese Only
Part Number
Configured Part Number is shown.
What is limit plug gauge
Instructions for use
- GOGO side ( can pass through the whole holes smoothly)
The GO side is used to check if the diameter of the hole which is bigger than the
maximum entity size【minimum tolerable size of the hole】, the gauge can go
through the hole completely. - NO-GO side (can not pass through the hole)
The NO-GO side is used to check if the diameter of the hole is smaller than the minimum
entity size【maximum tolerable size of the hole】, the gauge can notgo into the hole.
| What is entity size The volume of hole is the minimum when the hole is finished with minimum tolerable size. Therefore, the other volume except the hole (this is entity size, the right drawing with slanted portion) is the maximum, that is the maximum entity size. The opposite meaning of above mention is the minimum entity size. |  |
- Grade / same with the tolerance of the hole, plug gauge also has H6~H10.
The smaller the number the more precise it is. - Hardness / HV600~780
| Vickers hardness (HV): | Press the square pyramid shape diamond indenter against the surface of the material to do indentation hardness test. |
Precautions before use
| Precaution after use
|
Example for use
| Part Number |
|---|
| CLP10-H7 |
| CLP11-H7 |
| CLP12-H7 |
| CLP13-H7 |
| CLP14-H7 |
| CLP15-H7 |
| CLP16-H7 |
| CLP17-H7 |
| CLP18-H7 |
| CLP19-H7 |
| CLP20-H7 |
| CLP21-H7 |
| CLP22-H7 |
| CLP23-H7 |
| CLP24-H7 |
| CLP25-H7 |
| CLP26-H7 |
| CLP27-H7 |
| CLP28-H7 |
| CLP29-H7 |
| CLP30-H7 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nominal |
|---|---|---|---|---|---|
MYR 1,311.17 | 1 Piece(s) | 11 Day(s) | φ10 | ||
MYR 1,537.36 | 1 Piece(s) | 11 Day(s) | φ11 | ||
MYR 1,537.36 | 1 Piece(s) | 11 Day(s) | φ12 | ||
MYR 1,876.67 | 1 Piece(s) | 11 Day(s) | φ13 | ||
MYR 1,876.67 | 1 Piece(s) | 11 Day(s) | φ14 | ||
MYR 1,989.76 | 1 Piece(s) | 11 Day(s) | φ15 | ||
MYR 1,989.76 | 1 Piece(s) | 11 Day(s) | φ16 | ||
MYR 2,442.16 | 1 Piece(s) | 11 Day(s) | φ17 | ||
MYR 2,442.16 | 1 Piece(s) | 11 Day(s) | φ18 | ||
MYR 2,724.92 | 1 Piece(s) | 11 Day(s) | φ19 | ||
MYR 2,724.92 | 1 Piece(s) | 11 Day(s) | φ20 | ||
MYR 3,460.07 | 1 Piece(s) | 11 Day(s) | φ21 | ||
MYR 3,460.07 | 1 Piece(s) | 11 Day(s) | φ22 | ||
MYR 3,686.26 | 1 Piece(s) | 11 Day(s) | φ23 | ||
MYR 3,686.26 | 1 Piece(s) | 11 Day(s) | φ24 | ||
MYR 3,855.91 | 1 Piece(s) | 11 Day(s) | φ25 | ||
MYR 3,855.91 | 1 Piece(s) | 11 Day(s) | φ26 | ||
MYR 4,251.76 | 1 Piece(s) | 11 Day(s) | φ 27 | ||
MYR 4,251.76 | 1 Piece(s) | 11 Day(s) | φ28 | ||
MYR 4,760.71 | 1 Piece(s) | 11 Day(s) | φ29 | ||
MYR 4,760.71 | 1 Piece(s) | 11 Day(s) | φ30 |
Loading...
Basic Information
| Product Model | Limit Plug Gauge | Material | Gauge Part: Ceramic, Shank Part: Aluminum | Features | · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance in comparison to steel and is a material that strongly resists change over time. · No need to worry about rust or corrosion on measurement surface, with extremely simple maintenance and management after use. There is little impact from temperature, as thermal expansion coefficients are small. · No need to worry about the measurement surface becoming magnetically charged, as it is made of non-magnetic material. · There is little change in plasticity due to scratches or dents and there are no burrs or bulking. |
|---|---|---|---|---|---|
| Use | Hole Diameter Inspection |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Ring A Grade JIS (ISO Certified) Parallel Thread (LG) (G) for Pipes
- Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, [Fitting Classification: Medium], Class 6H +0.03 JIS (ISO Grade), Plug
- Parallel Thread Gauge (LG) (PS) (Conventional JIS) for Pipes Plug
- Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Set Product
- Limit Screw Ring Gauges, ISO Method JISB0251/0252
- Screw Limit Gauge (Plug Gauge)
- Tapered Pipe Thread Gauge
- Parallel Threading Ring Gauge For Piping (Go And No-Go Set)
Customers Who Viewed This Item Also Viewed
-
Limit Plug Gauge H7 (for Making)NIIGATASEIKI
Standard Price : MYR 792.41-
Days to Ship : 4 Day(s) or more
-
Ceramic Limited Plug Gauge H7 (for Construction Work)NIIGATASEIKI
Standard Price : MYR 550.36-
Days to Ship : 11 Day(s)
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy