(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type (SECL3540S32)
[Features]
· One unit accomplishes all kinds of tasks incredibly well.
· Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.
· Uses a 3D tip for excellent cutting performance and chip disposal, allowing high efficiency machining to be performed.
· Highly reliable cutter geometry and new JC5015 and JC5040 material combination makes it difficult to break, providing a long life
| Part Number |
|---|
| SECL3540S32 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | blade diameter D (φ) | Overall length (L) (mm) | Shank diameter (d) (mm) | Underneck length (ℓ1) (mm) | Dimension ℓ (mm) | Type | Supported tips (peripheral cutting edge) | Supported tips (tip cutting edge) | Applicable Part Clamp Screw | Applicable Part Wrench |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,253.93 | 1 Piece(s) | 14 Day(s) | 35 | 230 | 32 | 60 | 40 | Long Type | ZPMT1705○○R○ | ZPMT1805○○L | DSW-4510H | A-20SD |
Loading...
Basic Information
| Machining Application | Side / Groove / Inclined Cuts / Vertical | work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper | Mounting Method | With handle |
|---|---|---|---|---|---|
| Number of tips for use (tip blade) | 1 | Machining Application Details | Pocket machining / curved surface processing / helical processing / counter boring | Number of tips for use (outer circumference blade) | 3 |
Please check the type/dimensions/specifications of the part SECL3540S32 in the Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type series.
Specification/Dimensions
-
type
- SEC
-
blade diameter D(φ)
-
Overall length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Dimension ℓ(mm)
-
Type
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SECL1616S16 |
| SECL2021S20 |
| SECL2527S25 |
| SECL3234S32 |
| SECXL2627S25 |
| SECXL3334S32 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | blade diameter D (φ) | Overall length (L) (mm) | Shank diameter (d) (mm) | Underneck length (ℓ1) (mm) | Dimension ℓ (mm) | Type | Supported tips (peripheral cutting edge) | Supported tips (tip cutting edge) | Applicable Part Clamp Screw | Applicable Part Wrench |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,717.17 | 1 Piece(s) | 5 Day(s) or more | 16 | 180 | 16 | 75 | 16 | Long Type | ZPMT09T208R○ | ZDMT08T208L○ | TSW-2250 | A-07SD | ||
MYR 1,950.21 | 1 Piece(s) | 14 Day(s) | 20 | 185 | 20 | 75 | 21 | Long Type | ZCMT100308R○ | ZDMT100308L○ | ESW-206 | A-08SD | ||
MYR 1,896.98 | 1 Piece(s) | 7 Day(s) or more | 25 | 220 | 25 | 75 | 27 | Long Type | ZPMT13T3○○R○ | ZDMT13T3○○L○ | DSW-307 | A-10 | ||
MYR 2,134.67 | 1 Piece(s) | 6 Day(s) or more | 32 | 230 | 32 | 90 | 34.5 | Long Type | ZPMT1604○○R○ | ZPMT1604○○L○ | TSW-408 | A-15 | ||
MYR 2,208.45 | 1 Piece(s) | 14 Day(s) | 26 | 300 | 25 | 40 | 27 | Extra Long Type | ZPMT13T3○○R○ | ZDMT13T3○○L○ | DSW-307 | A-10 | ||
MYR 2,471.58 | 1 Piece(s) | 14 Day(s) | 33 | 350 | 32 | 50 | 34.5 | Extra Long Type | ZPMT1604○○R○ | ZPMT1604○○L○ | TSW-408 | A-15 |
Additional Products in this Category
- PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type
- SEC-Multi Mill, CHE-R Type
- Used for SEC-Sumi Dual, DGC Model DGC-EW
- Used for SEC-Wave Mill, WGC Model WGC(F)-RS
- SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius less than 3.2
- MECH Type End Mill (With Coolant Holes at Tip Blade)
- CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32
- CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327
Customers Who Viewed This Item Also Viewed
-
Super End Chipper SEC Type - Standard Type, Medium-Long TypeDIJET
Standard Price : MYR 1,656.60-
Days to Ship : 7 Day(s) or more
-
Line Master (Rigid Hardening Type), L32-130TRUSCO NAKAYAMA
Standard Price : MYR 839.56
Days to Ship : 5 Day(s) or more
-
-
Super End Chipper SEC Type - Compatible TipDIJET
Standard Price : MYR 68.26-
Days to Ship : 5 Day(s) or more
-
-
Swing Ball SWB Type G-Body SeriesDIJET
Standard Price : MYR 3,741.90-
Days to Ship : 7 Day(s) or more
-
-
Mirror Bore C Body, BNM-S-C ShapeDIJET
Standard Price : MYR 1,611.08-
Days to Ship : 6 Day(s) or more
-
PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank TypeOSG
Standard Price : MYR 1,352.53-
Days to Ship : 5 Day(s) or more
-
Side Chipper SIC Type Compatible TipDIJET
Standard Price : MYR 54.81-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy