(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MS, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy (DNMG150408MS-PR1125)
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy Cutting
Part Number
Configured Part Number is shown.
DNMG150408MS-PR1125
Basic Information
| Shape | D (55° Diamond) | Application | Outer Diameter / Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium - Heavy Cutting | Rake angle | Negative | Selfishly | No Preferred Hand |
Please check the type/dimensions/specifications of the part DNMG150408MS-PR1125 in the Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MS, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy series.
Specification/Dimensions
-
work material
- Stainless Steel
- Heat-Resistant Alloy, Titanium Alloy
-
type
- DNMG150404MS
- DNMG150408MS
- DNMG150412MS
- DNMG150604MS
- DNMG150608MS
- DNMG150612MS
-
Nose R
-
rε
- 0.4
- 0.8
- 1.2
-
Material
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| DNMG150404MS-PR1535 |
| DNMG150404MS-SW05 |
| DNMG150408MS-CA6515 |
| DNMG150408MS-PR1535 |
| DNMG150408MS-SW05 |
| DNMG150412MS-CA6515 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | work material | Nose R | rε | Material |
|---|---|---|---|---|---|---|---|---|
MYR 53.04 | 10 Piece(s) | 5 Day(s) or more | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | 0.4 | 0.4 | PR1535 | ||
MYR 50.65 | 10 Piece(s) | 6 Day(s) or more | Heat-Resistant Alloy, Titanium Alloy | 0.4 | 0.4 | SW05 | ||
MYR 45.76 | 10 Piece(s) | 6 Day(s) or more | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | 0.8 | 0.8 | CA6515 | ||
MYR 53.04 | 10 Piece(s) | 6 Day(s) or more | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | 0.8 | 0.8 | PR1535 | ||
MYR 50.65 | 10 Piece(s) | 6 Day(s) or more | Heat-Resistant Alloy, Titanium Alloy | 0.8 | 0.8 | SW05 | ||
MYR 45.76 | 10 Piece(s) | 6 Day(s) or more | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | 1.2 | 1.2 | CA6515 |
Additional Products in this Category
- Blade Tip Replacement Tip S (Square) SNGG-R-ST
- Blade Tip Replacement Tip T (Triangle) TNGG-L-ST
- CoroCut 2 Plunging/Grooving Tip
- CERATIZIT HyperCoat Chip
- Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CJ "for Finishing to Intermediate Cutting / Pull-up"
- Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PT "for Intermediate to Rough Cutting / High-Feed"
- 80° Hexagon Type Negative with Hole WNMG○○CJ "Finishing to Medium Lifting"
- Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing Cutting" for Mild Steel
Customers Who Viewed This Item Also Viewed
-
55° Diamond-Shape With Hole, Negative, DNMG-EF, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 40.18-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"KYOCERA
Standard Price : MYR 48.37-
Days to Ship : 6 Day(s) or more
-
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MQ, "for Finishing to Intermediate Cutting" for Stainless Steel / Heat Resistant Alloy
KYOCERA
Standard Price : MYR 45.76-
Days to Ship : 6 Day(s) or more
-
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○MS, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant AlloyKYOCERA
Standard Price : MYR 36.04-
Days to Ship : 5 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CPMT "for Finishing" for Mild SteelKYOCERA
Standard Price : MYR 32.25-
Days to Ship : 6 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CPMT "for Finishing to Intermediate Cutting" for Mild Steel
KYOCERA
Standard Price : MYR 34.46-
Days to Ship : 6 Day(s) or more
-
Kyocera Turning Insert CA510 CVD CoatingKYOCERA
Standard Price : MYR 36.83-
Days to Ship : 6 Day(s) or more
-
Kyocera Turning Insert CA515 CVD CoatingKYOCERA
Standard Price : MYR 38.28
Days to Ship : 10 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy