Vertical Hanging Clamp "V-25-N Type" (One-Touch Safety Lock Type)
Part Number: A2030

Structured to clamp with increasingly stronger force as the lifted load increases. The cam can be closed or locked open by a single-action push/pull operation of the lifting ring. The compression coil spring ensures that a certain initial load is always applied, and the clamp will not disconnect from the material, even if the load drops to zero.

Specifications of A2030

• Product Model

  Vertical Hanging Clamp

• Working Load Limit(t)

  1

• Minimum Clamp Width(mm)

  0

• Maximum Clamp Width(mm)

  25

• Size D(mm)

  60

• Size H(mm)

  353

• Dimension H2(mm)

  78

• Size L(mm)

  141

• JAN Code

  4942411520042

• Trusco Code

  448-6111

• Mass(kg)

  4.8

• Features

  Structured to bite under increasingly strong force, according to the increase of load lifted. The cam can be closed or locked in the open position by "Push and Pull" one-touch operation of the hanging ring. Due to a compression coil spring, the clamp it will not be detached from the opposite material, even if constant initial load acts and the load becomes zero. Since the cam can be held open, clamping operation is easy.

• Intended Use

  Steel plate, formed steel, and other vertical suspension work.

• Specifications

  For two-point hanging

Please check the type/dimensions/specifications of the part A2030 in the Vertical Hanging Clamp "V-25-N Type" (One-Touch Safety Lock Type) series.