Blind Rivet Stainless Steel Rivet Length 5.5–19.9 mm
Part Number: SS-66

Blind rivet that allows a metal plate to be fastened from one side.
[Features]
· Since it can be tightened from one side, it can also be used for pipes and sealed containers where hands cannot reach the back side.
· Unlike screws, it is highly resilient against loosening due to vibrations, etc.
· It can also be used for thin plates of 0.5 mm thickness.
[Applications]
· Used for applications such as machining the bodies of trucks, buses and aircraft.
· Used when machining products with outer grooves used in lighting fixtures, furniture, and houses.

Specifications of SS-66

• Rivet Length(mm)

  13.5

• Pilot Hole Dia.(mm)

  4.9

• Rivet Body (Flange) Material

  Stainless Steel (SUS305)

• Mandrel (Shaft) Material

  Stainless steel (high tensile strength stainless steel wire)

• Caulking Plate Thickness(mm)

  8.0~9.5

• Details Type

  Stainless steel/made of stainless steel, in pack

• JAN Code

  4989999082357

• Trusco Code

  217-0477

• Mass(g)

  80 (/pack)

• Shear Load(N)

  4900

• Flange diameter(mm)

  9.6

• Rivet diameter(mm)

  4.8

• Tensile Load(N)

  5880

• Features

  Blind rivets can easily tie base materials and thin plates around the back which are hard to reach. Rivets do not become loose from vibrations, unlike screws.

• Specifications

  Packaging included

• Application

  Best suited for locations where rustproofing and strength are required such as truck, bus, refrigerator truck panel, electric train, personal watercraft, household electric appliance, lighting equipment, steel furniture, sash, gate, veranda, shutter, signboard, stepladder, kitchen equipment, etc.

Please check the type/dimensions/specifications of the part SS-66 in the Blind Rivet Stainless Steel Rivet Length 5.5–19.9 mm series.