Ceramic Adjustment Screwdriver DA-48 – 52
Part Number: DA-51

Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.

Specifications of DA-51

• Standards for Tip Shape

  Minus (-)

• Tip Size Plus (+)

  -

• Tip Size, Slotted (-) Blade Width (mm) B1

  0.9 ～ 1.8

• Single Item / Set Classification

  Single Item

• Shaft Type

  Circle

• Magnet

  None

• Shaft Through

  None

• Bolster

  None

• Grip Type

  Resin

• Tip Size, Slotted (-) Blade Thickness (mm) B2

  0.4

• Tip Size

  -

• Opposite Side(mm)

  2/2.5

• Bits Length(mm)

  19/19

• Total Length(mm)

  136

• Weight(g)

  8

• Grip Diameter(mm)

  φ8

• Material

  Tip: Zirconian Fine Ceramic

• Characteristics

  Perfect non-conductive tip for high frequency area adjustment. Ideal alignment screwdriver for board protection. Four-in-one double ended adjustable (tip minus bit shaft part hexagon) tool. Pencil-type easy to carry design with caps for protecting tip. With clip.

• Precautions

  Breakage may occur when used with 0.01 N·m or greater torques. Bit may break and fragment may be launched if dropped on a hard surface.

• RoHS

  10

Please check the type/dimensions/specifications of the part DA-51 in the Ceramic Adjustment Screwdriver DA-48 – 52 series.