(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Spiral Fluted Taps for High Speed Tapping_F-SP
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| VFSHMR010N |
| VFSHMR010O |
| VFSHR010N |
| VFSHR010O |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | Class | Thread Length (mm) | Length under neck (mm) | Shank diameter (Ds) (mm) | Shank square width (K) (mm) | Shank square part length (mm) | Shape |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 196.93 | 1 Piece(s) | 9 Day(s) | M10 | 1.25 | 75 | P3 | 13 | - | 7 | 5.5 | 8 | e-1 | ||
MYR 196.93 | 1 Piece(s) | 9 Day(s) | M10 | 1.5 | 75 | P3 | 13 | - | 7 | 5.5 | 8 | e-1 | ||
MYR 286.26 | 1 Piece(s) | 8 Day(s) | M10 | 1.25 | 75 | P3 | 12 | - | 7 | 5.5 | 8 | e | ||
MYR 286.26 | 1 Piece(s) | 9 Day(s) | M10 | 1.5 | 75 | P3 | 13 | - | 7 | 5.5 | 8 | e |
Loading...
Basic Information
| Screw Types | Meter | work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Quenched and tempered steel (25 to 35 HRC) / Steel casting (SC) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tool Material Type | High-speed steel |
|---|---|---|---|---|---|
| Tap Type | Spiral Tap | Hole type | For blind hole | Chamfer threads | 2.5P |
| Coating Type | TiN | Coating Y/N | Available | Number of Grooves | 3 |
| Torsional Angle | 48° |
Specification/Dimensions
-
Pitch, Number of Threading(mm)
-
Overall Length (L)(mm)
-
Class
- P2
- P3
- P4
-
Thread Length(mm)
-
Length under neck(mm)
-
Shank diameter (Ds)(mm)
-
Shank square width (K)(mm)
-
Shank square part length(mm)
-
Shape
-
type
- F-SP
-
Nominal
Days to Ship
-
- All
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Spiral SYNCHRO Tap for Aluminum_HS-AL-SFT
- Spiral Fluted Taps for Stainless Steels_SU+SP
- Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL
- Long Shank Low Spiral Fluted Taps_LS-LO-SP
- Circle Dice (For Left Thread・38mm Diameter) EA829MW-112
- Tap Die Fine and Coarse Set EA829VX-2
- SG Spiral Tap Long Shank SGSPL
- Long Shank Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_LS-F-SL
Customers Who Viewed This Item Also Viewed
-
Short Spiral Fluted Taps, Deep Hole Use_S-SPYAMAWA MFG
Standard Price : MYR 49.81-
Days to Ship : 6 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy