(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
80° Diamond-Shape With Hole and Wiper Edge, Negative, CNMG-LUW, For Finish Cutting
[Features]
· High-efficiency breaker for finishing, with wiper edge.
· Because this product conforms to ISO standards, machining program corrections are not necessary for use.
· The effects of the wiper edge are maintained even on the obtuse-side (100°) corners.
(i)Caution
- Please use a holder with a 95° cutting angle.
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| CNMG120404NLUWT1500A |
| CNMG120404NLUWT1500Z |
| CNMG120408NLUWT1500A |
| CNMG120408NLUWT1500Z |
| CNMG120412NLUWT1500A |
| CNMG120412NLUWT1500Z |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Use | Work Material | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Thickness Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Detail Nose Radius (mm) | Breaker Rake Angle (°) | Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 31.73 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 0.4 | - | Cermet | ||
MYR 34.69 | 10 Piece(s) | 9 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 0.4 | - | Coated cermet | ||
MYR 31.73 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 0.8 | - | Cermet | ||
MYR 34.69 | 10 Piece(s) | 7 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 0.8 | - | Coated cermet | ||
MYR 31.73 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 1.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 1.2 | - | Cermet | ||
MYR 34.69 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 1.2 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 1.2 | - | Coated cermet |
Loading...
Basic Information
| Shape | C (80° Diamond) | Breaker Application | Finish | Rake Angle | Negative |
|---|---|---|---|---|---|
| Preferred Hand | No Preferred Hand | Clearance Angle(°) | 0 | Slot Code | G |
| Dimension S(mm) | 4.76 | Dimension φd(mm) | 12.7 | Cutting Edge Length(mm) | 12.9 |
Specification/Dimensions
-
Use
- Outer Diameter / Inner Diameter
-
Nose Radius
-
Corner Height Tolerance
- ±0.08～±0.2
-
Inscribed Circle Tolerance
- ±0.05～±0.15
-
Thickness Tolerance
- ±0.13
-
Hole Availability
- Available
- Yes
-
Hole Shape
- Cylinder State
- Cylindrical
-
Breaker Availability
- Both Faces
- No
- Yes (both sides)
-
Material Type
-
Detail Nose Radius(mm)
-
Breaker Rake Angle(°)
-
type
- CNMG-LUW
- CNMG□□□□□□N-LUW
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Sumi Boron Chip C (80° Rhombus) 2NU-CCGW
- Sumi Boron Chip D (55° Rhombus) NU-DNMA
- Tip (SEC - Thread Cutting Tool STH Type)
- Blade Tip Replacement Tip SNEW-ADTR
- Tip for Lathe, CBN Diamond, Positive CCMT
- Kyocera Insert for Turning, Coating CBN KBN10M
- Kyocera Turning Insert PV720 PVD Cermet (DCMT)
- Insert For Cut-Off, CTP, With Breaker
Customers Who Viewed This Item Also Viewed
-
80° Diamond-Shape With Hole, Negative, CNMG-UG, For Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 4 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG○○○-EX, For Light To Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 34.54-
Days to Ship : 4 Day(s) or more
-
Replacement Blade Insert C (80° Diamond) CNMG-N-GUSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 4 Day(s) or more
-
80° Diamond-Shape With Hole, Negative, CNMG-SU, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 27.60-
Days to Ship : 4 Day(s) or more
-
55° Diamond-Shape With Hole, Negative, DNMG-MU, For Medium To Rough CuttingSUMITOMO_ELEC_
Standard Price : MYR 45.83-
Days to Ship : 4 Day(s) or more
-
Replacement Blade Insert S (Square) SCGT-MN-SCSUMITOMO_ELEC_
Standard Price : MYR 48.03-
Days to Ship : 4 Day(s) or more
-
Replacement Blade Insert S (Square) SCGT-T-R-FXSUMITOMO_ELEC_
Standard Price : MYR 75.87-
Days to Ship : 4 Day(s) or more
-
Square-Shape With Hole, Positive 7° SCMT-MU, For Light To Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 38.71-
Days to Ship : 4 Day(s) or more
-
Square-Shape With Hole, Positive 7°, SCMT-SU, For Light CuttingSUMITOMO_ELEC_
Standard Price : MYR 38.71-
Days to Ship : 4 Day(s) or more
-
80° Diamond-Shape With Hole and Wiper Edge, Negative, CNMG-SEW, For Finish CuttingSUMITOMO_ELEC_
Standard Price : MYR 31.08-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting"KYOCERA
Standard Price : MYR 72.18
Days to Ship : 6 Day(s) or more
-
80° Diamond-Shape With Hole, Positive 7°, CCMT-SU, For Light CuttingSUMITOMO_ELEC_
Standard Price : MYR 24.65-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy