"Attack Screwdriver" Set
Part Number: AN112A

[Features]
· The cam part has been hard heat treated for improved abrasion resistance.
· The head portion is slightly softened to prevent breakage to the body due to impacts.
· Removing the bit holder allows for a generic socket to be used as it has a 12.7 mm insertion angle.

Specifications of AN112A

• Tip standards

  Phillips (+)/Flathead(-)

• Tip size / Phillips (+)

  No.2 / No.3

• Tip size / flathead (-) blade width (mm) B1

  9 ～ 11

• Single Product/Set Classification

  Set Product

• Magnet

  NA

• Grip Type

  Stainless Steel

• Set Content

  Main body (4112N) / Bit holder (4138) / Phillips bit (100P.32-2) / Phillips bit (100P.32-3) / Flathead bit (100S.32-9 )/ Flathead bit (100S.32-11)/Metal case

• Trusco Code

  279-4730

• Features

  Hard heat treatment is applied to the cam part to improve abrasion resistance. The head part is made a little soft to prevent cracking of the main body by striking. If the bit holder is removed, the insertion angle is 12.7 mm. So even a generic socket can be used.

• Case Size(mm)

  190×59×45

• Mass(g/set)

  1000

Please check the type/dimensions/specifications of the part AN112A in the "Attack Screwdriver" Set series.