(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting
[Features]
· Wear-resistant, general-purpose breaker with low resistance.
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| SNMG090308NGUT1500A |
| SNMG090308NGUT1500Z |
| SNMG120404NGUT1500A |
| SNMG120404NGUT1500Z |
| SNMG120408NGUT1500A |
| SNMG120408NGUT1500Z |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Use | Work Material | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Thickness Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Dimension S (mm) | Dimension φd (mm) | Detail Nose Radius (mm) | Breaker Rake Angle (°) | Cutting Edge Length (mm) | Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 24.65 | 10 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 3.18 | 9.525 | 0.8 | - | 9.525 | Cermet | ||
MYR 30.22 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 3.18 | 9.525 | 0.8 | - | 9.525 | Coated cermet | ||
MYR 36.89 | 10 Piece(s) | 8 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 0.4 | - | 12.7 | Cermet | ||
MYR 39.84 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.4 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 0.4 | - | 12.7 | Coated cermet | ||
MYR 36.89 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500A | 4.76 | 12.7 | 0.8 | - | 12.7 | Cermet | ||
MYR 39.84 | 10 Piece(s) | 4 Day(s) or more | Outer Diameter / Inner Diameter | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | 0.8 | ±0.08～±0.2 | ±0.05～±0.15 | ±0.13 | Available | Cylinder State | Both Faces | T1500Z | 4.76 | 12.7 | 0.8 | - | 12.7 | Coated cermet |
Loading...
Basic Information
| Shape | S (Square) | Breaker Application | Medium Cutting | Rake Angle | Negative |
|---|---|---|---|---|---|
| Preferred Hand | No Preferred Hand | Clearance Angle(°) | 0 | Slot Code | G |
Specification/Dimensions
-
Use
- Outer Diameter / Inner Diameter
-
Nose Radius
-
Corner Height Tolerance
- ±0.08～±0.2
-
Inscribed Circle Tolerance
- ±0.05～±0.15
-
Thickness Tolerance
- ±0.13
-
Hole Availability
- Available
- Yes
-
Hole Shape
- Cylinder State
- Cylindrical
-
Breaker Availability
- Both Faces
- No
- Yes (both sides)
-
Material Type
-
Dimension S(mm)
-
Dimension φd(mm)
-
Detail Nose Radius(mm)
-
Breaker Rake Angle(°)
-
type
- SNMG-GU
- SNMG□□□□□□N-GU
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Sumi Boron Chip D (55° Rhombus) 2NC-DCGW-TLS
- Blade Tip Replacement Tip C (80°Diamond) CCET-L-FY
- Blade Replacement Insert D (55° Rhombic) DCET-T-R-FX
- Square 90°, Negative, with Hole SNMM15○○PX "Single-sided / Rough Cutting, High-feed"
- CoroCut MB Insert For Face Grooving
- Kyocera Turning Insert CA530 CVD Coating
- Kyocera Turning Insert CA525 CVD Coating
- CA3 Series TNMG (GC Breaker)
Customers Who Viewed This Item Also Viewed
-
Blade Tip Replacement Tip S (Square) SNMG-N-SJSUMITOMO_ELEC_
Standard Price : MYR 24.65-
Days to Ship : 4 Day(s) or more
-
D Terminal Connector DX*LM SeriesHIROSE ELECTRIC
Standard Price : MYR 10.40
Days to Ship : 5 Day(s) or more
-
-
-
-
Blade Tip Replacement Tip S (Square) SNGASUMITOMO_ELEC_
Standard Price : MYR 38.74-
Days to Ship : 4 Day(s) or more
-
Blade Tip Replacement Tip S (Square) SENN-AFTNSUMITOMO_ELEC_
Standard Price : MYR 26.50-
Days to Ship : 4 Day(s) or more
-
Square-Shape With Hole, Negative, SNMG-EG, For Medium CuttingSUMITOMO_ELEC_
Standard Price : MYR 36.89-
Days to Ship : 4 Day(s) or more
-
Replacement Blade Insert S (Square) SNMG-N-EXSUMITOMO_ELEC_
Standard Price : MYR 39.73-
Days to Ship : 4 Day(s) or more
-
Square-Shape With Hole, Negative, SNMG-UZ, For Medium To Rough CuttingSUMITOMO_ELEC_
Standard Price : MYR 36.89-
Days to Ship : 4 Day(s) or more
-
Throw-away Tip for C-Cutter MiniDAISHOWASEIKI
Standard Price : MYR 54.14
Days to Ship : 6 Day(s) or more
-
Square 90°, Negative, with Hole SNMG1204○○-HQ "Finishing to Semi-Finishing"KYOCERA
Standard Price : MYR 33.42-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy