(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Chuck Mate
[Features]
·Soft jaw forming setup can be completed within one minute. Machining is completed in a short time. Even inexperienced users can perform centering with a single touch. Core runout accuracy is improved to 10 microns.
·It also increases your grasping power.
·No jigs such as cores, rings, etc. are required.
·Tightening margin can be freely adjusted by simply rotating the chuck mate to the left or right.
·On NC lathes, it does not interfere with permanent tooling, and caliper measurements can be taken while the caliper is still attached.
·It is lightweight, easy to handle, has a simple structure, and can be used for a long time.
·Grip chuck, tension chuck, and pass-through molding can all be done easily with this one tool.
·The bolt hole of the soft jaw is used for the hole for inserting the stop pin. No need to drill taps or extra holes.
·All you have to do is insert 3 set pins into the spot facing holes of the soft jaw mounting holes, tighten the chuck (open the tension chuck), and you are ready to go!
[Applications]
·Applies to soft jaw forming holders for chuck work.
Part Number
Configured Part Number is shown.
Features
●Soft jaw forming setup is less than 1 minute. Processing also completes in a short time. Even inexperienced persons can do centering with one touch. Core swinging accuracy is about 10μ.●Calipers can used without interfering with permanent tooling.
Usage
●For soft jaw during chuck work of the holder.Specification
●SPQ（piece）:1| Part Number |
|---|
| P-5-14 |
| P-6-14 |
| P-6-17 |
| P-8-17 |
| P-8-19 |
| P-8-20 |
| P-10-19 |
| P-10-20 |
| P-12N-19 |
| P-12N-20 |
| P-12N-22 |
| P-12N-23 |
| P-12N-25 |
| P-15-32 |
| S7-17 |
| S9-19 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Compatible Chuck Nominal Size | Chuck Outer Diameter (mm) | Detailed Type | Suitable Chuck Diameter (Inch) | Pin Diameter (mm) | Major Diameter (mm) | Maximum Machining Dimension (mm) | Trusco Code | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,261.18 | 1 Piece(s) | 11 Day(s) | 5 | 127 | P Type (for Power Chuck) | 5 | 13.5 | 145 | 65 | 103-1848 | 1100 | ||
MYR 1,429.45 | 1 Piece(s) | 10 Day(s) | 6 | 152.4 | P Type (for Power Chuck) | 6 | 13.5 | 170 | 85 | 112-8388 | 1400 | ||
MYR 1,429.45 | 1 Piece(s) | 10 Day(s) | 6 | 152.4 | P Type (for Power Chuck) | 6 | 16.5 | 170 | 85 | 112-8396 | 1400 | ||
MYR 1,912.93 | 1 Piece(s) | 10 Day(s) | 8 | 203.2 | P Type (for Power Chuck) | 8 | 16.5 | 220 | 115 | 112-8418 | 2800 | ||
MYR 1,827.15 | 1 Piece(s) | 5 Day(s) or more | 8 | 203.2 | P Type (for Power Chuck) | 8 | 18.5 | 220 | 115 | 112-8426 | 2800 | ||
MYR 1,912.93 | 1 Piece(s) | 10 Day(s) | 8 | 203.2 | P Type (for Power Chuck) | 8 | 19.5 | 220 | 115 | 156-6679 | 2800 | ||
MYR 2,295.35 | 1 Piece(s) | 10 Day(s) | 10 | 254 | P Type (for Power Chuck) | 10 | 18.5 | 260 | 148 | 112-8451 | 3500 | ||
MYR 2,295.35 | 1 Piece(s) | 10 Day(s) | 10 | 254 | P Type (for Power Chuck) | 10 | 19.5 | 260 | 148 | 156-6687 | 3500 | ||
MYR 3,157.00 | 1 Piece(s) | 11 Day(s) | 12 | 304.8 | P Type (for Power Chuck) | 12 | 18.5 | 318 | 186 | 405-5811 | 5300 | ||
MYR 3,157.00 | 1 Piece(s) | 11 Day(s) | 12 | 304.8 | P Type (for Power Chuck) | 12 | 19.5 | 318 | 186 | 405-5829 | 5300 | ||
MYR 3,157.00 | 1 Piece(s) | 11 Day(s) | 12 | 304.8 | P Type (for Power Chuck) | 12 | 21.5 | 318 | 186 | 405-5837 | 5300 | ||
MYR 3,157.00 | 1 Piece(s) | 11 Day(s) | 12 | 304.8 | P Type (for Power Chuck) | 12 | 22.5 | 318 | 186 | 405-5845 | 5300 | ||
MYR 3,157.00 | 1 Piece(s) | 10 Day(s) | 12 | 304.8 | P Type (for Power Chuck) | 12 | 24.5 | 318 | 186 | 405-5853 | 5300 | ||
MYR 3,261.20 | 1 Piece(s) | 11 Day(s) or more | 15 | 381 | P Type (for Power Chuck) | 15 | 31.0 | 389 | 230 | 367-9438 | 9500 | ||
MYR 1,987.50 | 1 Piece(s) | 10 Day(s) | 7 | 177.8 | S type (for scroll chuck) | 7 | 16.5 | 230 | 115 | 103-2356 | 3100 | ||
MYR 2,407.90 | 1 Piece(s) | 10 Day(s) | 9 | 228.6 | S type (for scroll chuck) | 9 | 18.5 | 270 | 148 | 103-2364 | 3900 |
Loading...
Basic Information
| Type | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Features | Soft jaw forming setup is done within 1 minute. Processing also completes in a short time. Even inexperienced people can do centering with single-action. Core runout accuracy is within 10 microns. Caliper measurements can be made without installing permanent tooling. When using, open the chuck, insert 3 stop pins of chuck mate in the mounting hole of soft jaw, and then tighten the chuck. In the case of tension chuck, perform the reverse operation. | Use | For soft jaw molding holder with chucked workpieces. |
|---|
Specification/Dimensions
-
Compatible Chuck Nominal Size
-
Chuck Outer Diameter(mm)
-
Detailed Type
- P Type (for Power Chuck)
- S type (for scroll chuck)
-
Suitable Chuck Diameter (Inch)
- 5
- 6
- 7
- 8
- 9
- 10
- 12
- 15
-
Pin Diameter(mm)
- 13.5
- 16.5
- 18.5
- 19.5
- 21.5
- 22.5
- 24.5
- 31.0
-
Major Diameter(mm)
- 145
- 170
- 220
- 230
- 260
- 270
- 318
- 389
-
Maximum Machining Dimension(mm)
- 65
- 85
- 115
- 148
- 186
- 230
-
Trusco Code
-
type
- P
- P-N
- S
Days to Ship
-
- All
- 5 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Lathe Center With Super Carbide
- Lathe Center
- TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type
- Handle (H) (1 Piece) For Milling Chucks (For FCT)
- Kabuto Clipper Lathe Dog for Cylindrical Grinding Machine
- Soft Jaw For HO High Jaw Kitagawa Hydraulic/Pneumatic Chucks
- Soft Jaw For B-200/B-200 Small Diameter Kitagawa Hydraulic/Pneumatic Chucks
- Soft Jaw For H01MA Howa Hydraulic/Pneumatic Chucks (For P3.0)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
3-Jaw Scroll Chuck, JN-T Series (Split Jaw Type)KITAGAWATEKKO
Standard Price : MYR 6,944.84-
Days to Ship : 9 Day(s) or more
-
Soft Jaw (for Kitagawa)TRUSCO NAKAYAMA
Standard Price : MYR 244.47-
Days to Ship : 5 Day(s) or more
-
3-Jaw Scroll Chuck, SC/JN Series (Integrated Jaw Type)KITAGAWATEKKO
Days to Ship : 9 Day(s) or more
-
3-Jaw Scroll Chuck (Integrated Jaw Type), Interchangeable Inner and Outer JawsKOBAYASHITEKKO
Standard Price : MYR 3,942.80-
Days to Ship : 9 Day(s) or more
-
-
-
3-Jaw Scroll Chuck (Split Jaw Type), Easy Attachment to Lathes and Index Tables by Front MountingKOBAYASHITEKKO
Days to Ship : 9 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy