Long Type All Screw Socket for Electric Drill
Part Number: ZNS-3L

For attaching and removing W 3/8" hanging bolts in ceiling work

[Features]
· Grasps screws without interference to full-thread ends, preventing damage to screw threads.
· The three internal rollers grip threaded parts automatically to enable quick threading of full threads.
· Parts inside the socket (consumable: rollers) can be replaced.
· The hex shank is 6.35 mm and can be quickly attached to an impact screwdriver for use.
· Uses carefully selected materials made in Japan.

Specifications of ZNS-3L

• Product Type

  Socket Bit (For Electric Drill)

• Overall Length(mm)

  150

• Shaft measurements(mm)

  6.35

• Single Item / Set Classification

  Single Item

• Applicable Screw Diameter

  W3/8 inch

• Socket Depth(mm)

  105

• Material

  SCM435

• Weight(g)

  180

• Socket Section Outer Diameter(mm)

  27.9

• Packing Dimensions (Height x Width)(mm)

  202×35

• Guaranteed Torque(N·m)

  75

• Features

  Grips the threads without coming into contact with the end of the all thread so it does not damage the ridges. The 3 internal rollers will automatically grip onto the threaded part, and make for quick threading in of all thread. The socket internal part (consumable good: roller) can be replaced. The hex shank part is 6.35 mm and can be quickly equipped on an impact driver for use.

Please check the type/dimensions/specifications of the part ZNS-3L in the Long Type All Screw Socket for Electric Drill series.