Form Tie Socket (Short Type) for Electric Drill
Part Number: EFS-21SS

For removing Ivy Form Ties and nuts together

[Features]
· A socket with 2 functions in 1 piece, where an oval-shaped component is embedded in the 21 mm socket.
· The hex shank is press fit for resistance to torsion and breakage (supports 7.2 V, 14.4 V, 18 V).
· The socket part is a double hex surface type that quickly fits bolts, with a focus on workability.
· Uses carefully selected materials made in Japan.

Specifications of EFS-21SS

• Product Type

  Socket Bit (For Electric Drill)

• Opposite side dimensions(mm)

  21(S1=16)

• Overall Length(mm)

  72

• Shaft measurements(mm)

  6.35

• Single Item / Set Classification

  Single Item

• Product Category

  Short Type

• Socket Depth(mm)

  29

• Material

  SCM435

• Weight(g)

  125

• Socket Section Outer Diameter(mm)

  29

• Hexagonal Section Depth(mm)

  12

• Packing Dimensions (Height x Width)(mm)

  124×35

• Guaranteed Torque(N·m)

  75

• Features

  An oval-shaped component is embedded in the 21 mm socket. This enables two-way use in a single socket. The hexagonal shank portion is press fitting type which is resistant to twisting and breaking (supports 7.2 V, 14.4 V, 18 V). 12-angle surface type which emphasizes work in which the socket enters quickly into the bolt.

Please check the type/dimensions/specifications of the part EFS-21SS in the Form Tie Socket (Short Type) for Electric Drill series.