(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead (Part Numbers)
[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
Japanese Only
| Part Number |
|---|
| CXS4010-030 |
| CXS4015-045 |
| CXS4020-060 |
| CXS4025-075 |
| CXS4030-090 |
| CXS4040-120 |
| CXS4050-150 |
| CXS4060-180 |
| CXS4080-240 |
| CXS4100-300 |
| CXS4120-360 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | work material | Blade length (ℓ) (mm) | Number of flutes (sheet) | Type | Coating | Shank diameter (d) (mm) | Overall Length (L) (mm) | Underneck length (ℓ1) (mm) | Machining Application | Blade tip shape | Torsion Angle (θ) | JAN Code | Trusco Code | Tool Material | Standard / alteration classification | Pitch (Blades) | Corner type | Helix angle | Neck Gradient (°) | Coating details | Blade diameter tolerance | Neck Diameter (mm) | Flute Diameter Tolerance (mm) | Neck Diameter φd1 (mm) | Shank Taper Angle Bta (°) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depending on Inclined Angle of Workpiece 1°30' (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 191.96 | 1 Piece(s) | 6 Day(s) or more | 1 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 1.5 | 4 | Long Neck Square | - | 4 | 50 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 0.96 | 16° | 3.25 | 3.35 | 3.47 | 3.59 | 3.86 | ||
MYR 191.96 | 1 Piece(s) | 7 Day(s) or more | 1.5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 2.25 | 4 | Long Neck Square | - | 4 | 50 | 4.5 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 1.46 | 16° | 4.66 | 4.81 | 4.97 | 5.15 | 5.53 | ||
MYR 179.57 | 1 Piece(s) | 6 Day(s) or more | 2 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 3 | 4 | Long Neck Square | - | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 1.94 | 16° | 6.24 | 6.44 | 6.66 | 6.89 | 7.41 | ||
MYR 179.57 | 1 Piece(s) | 7 Day(s) or more | 2.5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 3.75 | 4 | Long Neck Square | - | 4 | 50 | 7.5 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 2.44 | 16° | 7.79 | 8.04 | 8.31 | 8.60 | 9.25 | ||
MYR 206.29 | 1 Piece(s) | 6 Day(s) or more | 3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 4.5 | 4 | Long Neck Square | - | 6 | 50 | 9 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 2.95 | 16° | 9.34 | 9.64 | 9.97 | 10.31 | 11.09 | ||
MYR 216.58 | 1 Piece(s) | 7 Day(s) or more | 4 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 6 | 4 | Long Neck Square | - | 6 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 3.86 | 16° | 12.61 | 13.02 | 13.46 | 13.92 | 14.97 | ||
MYR 232.55 | 1 Piece(s) | 6 Day(s) or more | 5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 7.5 | 4 | Long Neck Square | - | 6 | 50 | 15 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | 4560295082113 | 485-2851 | - | - | - | - | - | - | - | - | - | 0~-0.02 | 4.86 | 16° | 15.70 | 16.21 | 16.76 | No interference | No interference | ||
MYR 250.39 | 1 Piece(s) | 6 Day(s) or more | 6 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 9 | 4 | Long Neck Square | - | 6 | 50 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0~-0.02 | 5.86 | - | No interference | No interference | No interference | No interference | No interference | ||
MYR 309.67 | 1 Piece(s) | 7 Day(s) or more | 8 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 12 | 4 | Long Neck Square | - | 8 | 60 | 24 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0～-0.03 | 7.82 | - | No interference | No interference | No interference | No interference | No interference | ||
MYR 439.05 | 1 Piece(s) | 10 Day(s) | 10 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 15 | 4 | Long Neck Square | - | 10 | 70 | 30 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0～-0.03 | 9.82 | - | No interference | No interference | No interference | No interference | No interference | ||
MYR 524.85 | 1 Piece(s) | 6 Day(s) or more | 12 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | 18 | 4 | Long Neck Square | - | 12 | 90 | 36 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Standard Helix (30 to 40°) | - | - | - | - | - | - | - | - | - | - | - | 0～-0.03 | 11.82 | - | No interference | No interference | No interference | No interference | No interference |
Loading...
Specification/Dimensions
-
Blade diameter (D)(φ)
-
work material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Titanium
- Copper
-
Blade length (ℓ)(mm)
-
Number of flutes(sheet)
-
Type
- Long Neck Square
-
Coating
- For General Steel (AlCrN etc.)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Blade tip shape
- With Lead
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- IKOU
-
JAN Code
-
Trusco Code
-
Tool Material
- Carbide
-
Standard / alteration classification
- Manufacturer standard product
-
Pitch(Blades)
- 4
-
Corner type
- Standard
-
Helix angle
- Unequal lead / unequal division
-
Neck Gradient(°)
- 16
-
Coating details
- UT coat
-
Blade diameter tolerance
- -0.03 to 0
- -0.02 to 0
-
Neck Diameter(mm)
-
type
- CXS
- CXS4010-060
- CXS4015-085
- CXS4020-110
- CXS4025-135
- CXS4030-160
- CXS4040-210
- CXS4050-260
- CXS4060-320
- CXS4080-420
- CXS4100-520
- CXS4120-620
-
Machining Application
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
Days to Ship
-
- All
- 6 Day(s) or Less
- 7 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- VAC Series Carbide 2-Flute Long Neck Square End Mill
- GS MILL Long Neck, 2-Flute GSN2
- Long Neck for Copper Work, 2-Flute CURIB
- Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS
- C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]
- CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]
- MHRH430 4-Flute Long Neck End Mill for High-Hardness
- Unequal Lead End Mill, Long Neck, 3-Flute, for Aluminum RF100 A 3473
Customers Who Viewed This Item Also Viewed
-
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_recommend_b$)
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]UNION TOOL
Standard Price : MYR 185.49-
Days to Ship : 5 Day(s) or more
-
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_recommend_b$)
AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]UNION TOOL
Standard Price : MYR 173.11-
Days to Ship : 6 Day(s) or more
-
-
CPM End Mill (roughing, fine-pitch type, silent type) SI-WH-RESFOSG
Standard Price : MYR 298.85-
Days to Ship : 5 Day(s) or more
-
V Coating XPM End Mill (2-flute medium type) V-XPM-EDNOSG
Standard Price : MYR 178.91-
Days to Ship : 5 Day(s) or more
-
XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDNOSG
Standard Price : MYR 191.61-
Days to Ship : 5 Day(s) or more
-
HLRS2000 HM Coated 2-Flute Long Neck RadiusUNION TOOL
Standard Price : MYR 176.85-
Days to Ship : 5 Day(s) or more
-
Carbide Broach Reamer (Straight Shank)NIKKENKOSAKU
Standard Price : MYR 435.99-
Days to Ship : 5 Day(s) or more
-
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_recommend_b$)
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]UNION TOOL
Standard Price : MYR 97.30-
Days to Ship : 5 Day(s) or more
-
HLRS4000 HM Coated 4-Flute Long Neck RadiusUNION TOOL
Standard Price : MYR 209.02-
Days to Ship : 5 Day(s) or more
-
HLS4000 HM Coated 4-Flute Long Neck SquareUNION TOOL
Standard Price : MYR 141.40-
Days to Ship : 5 Day(s) or more
-
Straight shank new Drill Mill chuck standard SetYUKIWA SEIKO
Standard Price : MYR 2,964.85
Days to Ship : 9 Day(s)
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_recommend_b$)
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_recommend_b$)
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy