(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill (MSE430P-2.5)
Sharp edge enables a wide range of material to be cut, from non-ferrous metals through to steel. Able to perform finish machining with little deflection
Part Number
Configured Part Number is shown.
MSE430P-2.5
| Part Number |
|---|
| MSE430P-2.5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | (γ) Neck Angle (°) | Manufacturer Code | Flute Diameter Tolerance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 142.10 | 1 Piece(s) | 11 Day(s) | 2.5 | 7 | 4 | 45 | 9 | 08-00112-00250 | -0.01～-0.06 |
Loading...
Basic Information
| work material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Aluminum / Titanium / Copper / Resin | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Coating | TiAlN | Machining Application | Flat Surface / Side Surface / Groove / Inclined Cutting | Blade tip shape | Sharp Corner |
| Torsion Angle (θ) | Standard Helix (30 to 40°) |
Please check the type/dimensions/specifications of the part MSE430P-2.5 in the MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill series.
Specification/Dimensions
-
type
- MSE430P
-
Blade diameter (D)(φ)
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
(γ) Neck Angle(°)
- 9
-
Manufacturer Code
Days to Ship
-
- All
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MSE430P-10 |
| MSE430P-12 |
| MSE430P-2 |
| MSE430P-3 |
| MSE430P-4 |
| MSE430P-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | (γ) Neck Angle (°) | Manufacturer Code | Flute Diameter Tolerance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 418.85 | 1 Piece(s) | 11 Day(s) | 10 | 25 | 10 | 75 | - | 08-00112-01000 | -0.01～-0.12 | ||
MYR 646.96 | 1 Piece(s) | 11 Day(s) | 12 | 30 | 12 | 80 | - | 08-00112-01200 | -0.01～-0.13 | ||
MYR 199.66 | 1 Piece(s) | 11 Day(s) | 2 | 5 | 4 | 45 | 9 | 08-00112-00200 | -0.01～-0.05 | ||
MYR 217.73 | 1 Piece(s) | 11 Day(s) | 3 | 8 | 4 | 50 | 9 | 08-00112-00300 | -0.01～-0.07 | ||
MYR 217.51 | 1 Piece(s) | 11 Day(s) | 4 | 10 | 4 | 50 | - | 08-00112-00400 | -0.01～-0.08 | ||
MYR 177.93 | 1 Piece(s) | 11 Day(s) | 5 | 13 | 6 | 55 | 9 | 08-00112-00500 | -0.01～-0.09 |
Additional Products in this Category
- GS MILL 2-Flute Blade 2GS
- Micro Grain Carbide End Mills FX coated 4 Flutes Short (Vibration-resistant Multipurpose Type)_UP-PHS
- NX-25 Lead 25 End Mill
- MSE430 MUGEN-COATING 4-Flute End Mill
- Carbide Air Hole End Mill 4-Flute, Standard Type
- UEM Long Ultra 30 End Mill AH10
- End Mill For Roughing & Semi-Finishing (Double Fluted) Cylindrical Shank With Corner Radius
- General-Purpose CoroMill Plura End Mill For Roughing & Finishing, 1P222-XA (Hardness 48 HRC Max.)
Customers Who Viewed This Item Also Viewed
-
MSE430 MUGEN-COATING 4-Flute End MillNS TOOL
Standard Price : MYR 109.85-
Days to Ship : 5 Day(s) or more
-
MHD445 MUGEN-COATING 4-Flute End Mill for Hardened SteelNS TOOL
Standard Price : MYR 237.77-
Days to Ship : 11 Day(s)
-
-
MHDH445 4-Flute Square-End Mill for High-HardnessNS TOOL
Standard Price : MYR 245.36-
Days to Ship : 10 Day(s) or more
-
TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) modelMISUMI
Standard Price : MYR 75.57-
Days to Ship : 2 Day(s) or more
-
MSEM430 MUGEN-COATING 4-Flute Medium End MillNS TOOL
Standard Price : MYR 226.47-
Days to Ship : 10 Day(s)
-
MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End MillNS TOOL
Standard Price : MYR 75.72-
Days to Ship : 8 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy