(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
C-CTE 4000, UT Coat, 4-Flute Tapered (C-CTE4030-6)
[Features]
· Taper end mill with extensive variations from taper half angle of 30' to 7°
Part Number
Configured Part Number is shown.
C-CTE4030-6
| Part Number |
|---|
| C-CTE4030-6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter φD' (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 333.90 | 1 Piece(s) | 5 Day(s) or more | 3 | 3 | 10 | 6 | 50 | 4.05 |
Loading...
Basic Information
| Type | Tapered Square | work material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Copper | Number of flutes(sheet) | 4 |
|---|---|---|---|---|---|
| Coating | TiCN | Torsion Angle | 30° twist |
Please check the type/dimensions/specifications of the part C-CTE4030-6 in the C-CTE 4000, UT Coat, 4-Flute Tapered series.
Specification/Dimensions
-
type
- C-CTE4000
-
Single corner (θ)(Degree)
-
Tip diameter (D)(φ)
-
Blade length (l)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| C-CTE4030-2 |
| C-CTE4030-3 |
| C-CTE4030-4 |
| C-CTE4040-1 |
| C-CTE4040-10 |
| C-CTE4040-14 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter φD' (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 397.25 | 1 Piece(s) | 10 Day(s) | 1 | 3 | 10 | 6 | 50 | 3.35 | ||
MYR 333.90 | 1 Piece(s) | 6 Day(s) or more | 1.5 | 3 | 10 | 6 | 50 | 3.52 | ||
MYR 397.25 | 1 Piece(s) | 10 Day(s) | 2 | 3 | 10 | 6 | 50 | 3.7 | ||
MYR 411.94 | 1 Piece(s) | 10 Day(s) | 0.5 | 4 | 15 | 6 | 50 | 4.26 | ||
MYR 570.62 | 1 Piece(s) | 10 Day(s) | 5 | 4 | 15 | 8 | 50 | 6.63 | ||
MYR 534.59 | 1 Piece(s) | 6 Day(s) or more | 7 | 4 | 15 | 8 | 50 | 7.68 |
Additional Products in this Category
- TSC series carbide tapered end mill, 4-flute / for deep ribbing
- 2-flute, Tapered Blade, Short Type MG-TPDS
- Carbide End Mill (Trapezoidal Runner) MG-TRC
- MTE230 MUGEN-COATING Tapered End Mill
- Carbide Tapered End Mill NTE-4
- Carbide Air Wheel Solid Taper End Mill
- Taper end mill 2 flutes
- Carbide Graphite Solid Tapered End Mill GTE
Customers Who Viewed This Item Also Viewed
-
TSC series carbide tapered end mill, 4-flute / regularMISUMI
Standard Price : MYR 326.29-
Days to Ship : 4 Day(s) or more
-
C-CTE 2000, UT Coat, 2-Flute TaperedUNION TOOL
Standard Price : MYR 278.98-
Days to Ship : 5 Day(s) or more
-
MTE230 MUGEN-COATING Tapered End MillNS TOOL
Standard Price : MYR 298.07-
Days to Ship : 5 Day(s) or more
-
2-flute, Tapered Blade, Short Type FX-MG-TPDSOSG
Standard Price : MYR 451.10-
Days to Ship : 5 Day(s) or more
-
Carbide Solid Taper End Mill (Medium)EIKOSHA
Standard Price : MYR 330.64-
Days to Ship : 4 Day(s) or more
-
TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-fluteMISUMI
Standard Price : MYR 330.26-
Days to Ship : 4 Day(s) or more
-
Carbide Solid Tapered End Mill CSTEEIKOSHA
Standard Price : MYR 323.41-
Days to Ship : 4 Day(s) or more
-
-
4-flute, Tapered Blade, Short Type MG-TPMSOSG
Standard Price : MYR 481.16-
Days to Ship : 5 Day(s) or more
-
One Cut Ball Long Type DZ-OCLB-TDIJET
Standard Price : MYR 1,227.75-
Days to Ship : 5 Day(s) or more
-
For Rib Grooves, Taper Ball End Type FXS-RB-TPBOSG
Standard Price : MYR 792.51-
Days to Ship : 5 Day(s) or more
-
NTER-2X X-Coating Taper Radius End MillNS TOOL
Standard Price : MYR 637.93-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy