(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
3-flute Chamfering Cutter (positive type) HSCT-P (HSCT-P-2X45X16)
End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
Part Number
Configured Part Number is shown.
HSCT-P-2X45X16
| Part Number |
|---|
| HSCT-P-2X45X16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Tool Diameter (D) (mm) | Blade Length (mm) | Large Tip Diameter (mm) | Tool No. | Link Diameter (d) (mm) | Tip Diameter (mm) | Overall Length (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,398.52 | 1 Piece(s) | 5 Day(s) or more | 2 | 7 | 16 | 9200016 | 16 | 2 | 100 |
Loading...
Basic Information
| Application | Centering ( Positioning ) / Hole Chamfer / Chamfering / Horizontal / V Groove | Point Angle(θ) | 90 | work material | General Steel / Stainless Steel / Aluminum / Titanium |
|---|---|---|---|---|---|
| Single blade, two blades | Single Blade | Peripheral Blade Y/N | None | Tool Material Type | Carbide |
| Coating Y/N | None | Coating Type | Non-Coated | Half Included Angle(Degree) | 45 |
Please check the type/dimensions/specifications of the part HSCT-P-2X45X16 in the 3-flute Chamfering Cutter (positive type) HSCT-P series.
Specification/Dimensions
-
type
- HSCT-P
-
Tool Diameter (D)(mm)
-
Blade Length(mm)
-
Large Tip Diameter(mm)
-
Tool No.
-
Link Diameter (d)(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HSCT-P-1X45X6 |
| HSCT-P-1X45X8 |
| HSCT-P-2X45X10 |
| HSCT-P-2X45X12 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Tool Diameter (D) (mm) | Blade Length (mm) | Large Tip Diameter (mm) | Tool No. | Link Diameter (d) (mm) | Tip Diameter (mm) | Overall Length (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 433.60 | 1 Piece(s) | 5 Day(s) or more | 1 | 2.5 | 6 | 9200006 | 6 | 1 | 50 | ||
MYR 525.80 | 1 Piece(s) | 5 Day(s) or more | 1 | 3.5 | 8 | 9200008 | 8 | 1 | 60 | ||
MYR 683.63 | 1 Piece(s) | 5 Day(s) or more | 2 | 4 | 10 | 9200010 | 10 | 2 | 70 | ||
MYR 878.60 | 1 Piece(s) | 5 Day(s) or more | 2 | 5 | 12 | 9200012 | 12 | 2 | 75 |
Additional Products in this Category
- Leading Drill TIN-NC-LDS
- CC, Center for Chamfering
- Toglon Sharp SP 60° Carbide
- Milling Cutter for 90° Chamfering Type N 6713
- Diamond-Shaped Tape Cutter, Type: Chamfering Mold- 0.6mm
- V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
- V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
- Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
Customers Who Viewed This Item Also Viewed
-
3-flute Chamfering Cutter (negative type) HSCT-NOSG
Standard Price : MYR 431.61-
Days to Ship : 5 Day(s) or more
-
-
TS coated carbide chamfering end mill, 3-flute / short modelMISUMI
Standard Price : MYR 358.66-
Days to Ship : 4 Day(s) or more
-
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-POSG
Standard Price : MYR 462.24-
Days to Ship : 9 Day(s) or more
-
2-flute Spiral Chamfering Cutter FX-SCCOSG
Standard Price : MYR 521.16-
Days to Ship : 5 Day(s) or more
-
Leading Drill, Carbide FX Coating FX-LDSOSG
Standard Price : MYR 1,521.33-
Days to Ship : 5 Day(s) or more
-
Milling Cutter for 90° Chamfering Type N 6713GUHRING
Standard Price : MYR 212.70-
Days to Ship : 5 Day(s) or more
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank modelMISUMI
Standard Price : MYR 378.94-
Days to Ship : 4 Day(s) or more
-
Carbide Inversed Chamfering Cutter KUMW-4KYOWA SEIKO
Standard Price : MYR 501.21-
Days to Ship : 5 Day(s) or more
-
-
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSSOSG
Standard Price : MYR 289.48-
Days to Ship : 5 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy