(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
MELSEC-F Series CF Card Special Adapter
Capable of storing up to 254 items of sequencer data of up to 32,767 lines in CSV format onto a CF card.
Part Number
Configured Part Number is shown.
FX3U-CF-ADP
MELSEC-F CF Card Special Adapter Specifications
FX3U-CF-ADP image
- Capable of storing up to 254 items of sequencer data of up to 32,767 lines in CSV format onto a CF card.
- The stored CSV file can be read out with spreadsheet software, etc. and displayed for graph display and analysis.
- Stored data on the CF card can be read out to the sequencer line by line and used for sequence control.
Performance Specifications
| Data Sending/receiving Method | By application command of the basic unit | |
|---|---|---|
| Time Data | Operates with the time data of the basic unit | |
| DOS File System | FAT16 | |
| Maximum Data Capacity | 2 GB | |
| Maximum File Size | 512 MB (per file) | |
| Data Format | CSV format | |
| Maximum Number of Files | 63 files (when FIFO function is not used) | |
| FIFO Function File | 1 pattern. File name auto creation | |
| Data Saving Directory | Regular File | \FX3U_CF\DATA\.(Directory name fixed) |
| FIFO File | \FX3U_CF\DATA\FIFO\.(Directory name fixed) | |
| File Name Format | 8.3 format (extension is CSV fixed) Single-byte alphanumeric characters, symbols and character strings permitted by MS-DOS | |
| Number of Occupied Input/Outputs | 0 point (This has nothing to do with the maximum number of input/output points of the sequencer) | |
| Applicable Sequencer | For connecting to FX3U (Ver.2.61 or later), FX3UC (Ver.2.61 or later), FX3U and FX3UC-32MT-LT (-2), a function expansion board is required. Only one FX3U-CF-ADP can be added to the above sequencer, and it is handled in the same way as a communication function expansion board and communication special adapter, so it occupies one communication channel (ch). | |
| Weight | 0.3 kg (when CF card is not mounted) | |
| CF card ACCESS Switch Specifications | ||
| ON | Access permission to compact flash card | |
| OFF | No access to the compact flash card: When removing the compact flash card or turning off the FX3U-CF-ADP, make sure that the BUFFER LED and ACCESS LED are completely turned off after turning off the CF card ACCESS switch. | |
| Compact Flash Card Required Specifications | ||
| Operating Humidity | 5 to 95% RH (no condensation) | |
| Power Supply Voltage | 3.3 V (at 150 mA or lower) | |
| Connector Type | Type I | |
| Format Type | FAT16 (to have been formatted with FAT16) | |
| Data Capacity | 2 GB or less | |
| Connector Terminal | Gold plating | |
| Number of Boards That Can be Installed | 1 pc. | |
| Compatible Compact Flash Card | GT05-MEM-128 MC: Flash ROM 128 MB GT05-MEM-256 MC: Flash ROM 256 MB GT05-MEM-512 MC: Flash ROM 512 MB GT05-MEM-1 GC: Flash ROM 1 GB GT05-MEM-2 GC: Flash ROM 2 GB Compact flash card has a lifespan due to writing. In general, the lifespan of a compact flash card becomes short as the available space decreases. Make sure to keep enough free space. | |
| Power Supply Specifications | ||
| Adapter Drive Power Supply | Power Supply Voltage | 24 V DC +20%, -15%, ripple (p-p) within 5% |
| Allowable Momentary Power Outage Duration | Operation continues following a momentary power failure of 1 ms or less | |
| Current Consumption | Supply 24 V DC power to the 130 mA power connector. | |
| Interface Drive Power Supply | 5 V DC, 50 mA (internal power supply from 5 V DC power supply of sequencer) | |
General Specifications
| Ambient Temperature | 0 to 55°C: When operating, -25 to 75°C: When storing The ambient temperature upper limit must not exceed the compact flash card operating temperature limit of -20°C. For example: If the compact flash card operating temperature upper limit is 75°C, the ambient temperature upper limit is 55°C. | ||
|---|---|---|---|
| Relative Humidity | 5 to 95% RH (no condensation): when operating | ||
| Vibration Resistance | When Mounting to DIN Rail | Frequency: 10 to 57 Hz | Single Amplitude: 0.035 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) |
| Frequency: 57 to 150 Hz | Acceleration: 4.9 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| When Mounting Directly | Frequency: 10 to 57 Hz | Single Amplitude: 0.075 mm 10 times in each direction of X, Y and Z total of 80 minutes each) | |
| Frequency: 57 to 150 Hz | Acceleration: 9.8 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| Impact Resistance | 147 m/s2, for a duration of 11 ms, 3 times in each direction of X, Y and Z with a half-sine pulse | ||
| Noise Resistance | Achieved through a noise simulator with a noise voltage of 1,000 Vp-p, noise width of 1 μs, the rise time of 1 ns and frequency of 30 to 100 Hz | ||
| Dielectric Strength | Between all terminals and the earth terminal: 500 V AC for 1 minute | ||
| Insulation Resistance | Between all terminals and the earth terminal: 5 MΩ or more at 500 V DC on an ohmmeter | ||
| Grounding | D-type grounding (grounding resistance: 100 Ω or less)<Do not use common grounding with high-power systems> For grounding, please use a dedicated or shared grounding. | ||
| Operating Atmosphere | There shall be no corrosion gas or flammable gas and not much conductive dust | ||
| Altitude of Use | 2,000 m or lower Cannot be used in environments pressurized higher than the atmospheric pressure. Doing so may cause failure. | ||
| Part Number |
|---|
| FX3U-CF-ADP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS |
|---|---|---|---|---|---|
MYR 2,350.18 | 1 Piece(s) | 91 Day(s) | 6 |
Loading...
Basic Information
| Type | Other | Classification | FX3U/FX3UC | Note | Up to a maximum of 254 items of sequencer data (up to a maximum of 32,767 columns) can be saved to CF cards in CSV format. |
|---|
Please check the type/dimensions/specifications of the part FX3U-CF-ADP in the MELSEC-F Series CF Card Special Adapter series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- CC-Link Repeater Unit (Optical Repeater)
- MECHATROLINK-II supported position control unit CJ1W-NC□71
- CompoNet bit slave (connector type) CRT1B-□D02JS(-1) / □D04JS(-1)
- DRT2 Connector Terminal
- G70D relay terminal
- Temperature input unit GT1-TS04□
- GX encoder input terminal
- Expansion Unit XWT
Customers Who Viewed This Item Also Viewed
-
MELSEC-F Series Board For Special Adapter ConnectionMITSUBISHI
Standard Price : MYR 121.67
Days to Ship : 82 Day(s)
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy