(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Linear drive, DFM Series (DFM-16-10-P-A-KF-F1A)
Part Number
Configured Part Number is shown.
DFM-16-10-P-A-KF-F1A
- Download
Product Details - CAD Data unavailable
Linear drive, DFM Series
Features
Specifications
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pneumatic connection | M3 | M3 | M5 | M5 | M5 | G1/8 | G1/8 | G1/8 | G1/4 | G1/4 | G3/8 | G3/8 | |
| Design | Piston | ||||||||||||
| Piston rod | |||||||||||||
| Guide rods with yoke | |||||||||||||
| Cushioning | Elastic cushioning rings/plates at both ends | ||||||||||||
| Position sensing | Via proximity switch | ||||||||||||
| Type of mounting | With through-hole | ||||||||||||
| With female thread | |||||||||||||
| Mounting position | Any | ||||||||||||
| Protection against torsion/guide | Guide rod with yoke/with plain-bearing or ball bearing guide | ||||||||||||
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating and environmental conditions | - | - | - | - | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Operating pressure [bar] | 2 to 8 | 1.5 to 8 | 2 to 10 | 1.5 to 10 | 1 to 10 | 0.5 to 10 | |||||||
| Operating medium | Compressed air to ISO 85731:2010 [7:4:4] | ||||||||||||
| Note on operating/ pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||||||||||||
| Ambient temperature [℃] | DFM-...-GF | -10 to +60 | -20 to +80 | ||||||||||
| DFM-...-KF | - | -5 to +60 | |||||||||||
| Corrosion resistance CRC | 1 | ||||||||||||
Speeds [m/s]
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cushioning P | ||||||||||||
| Maximum speed, advancing | 1.3 | 1.7 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
| Maximum speed, retracting | 1.1 | 1.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
| Part Number |
|---|
| DFM-16-10-P-A-KF-F1A |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Pneumatic connection | Piston diameter (mm) | Guide | Max. speed (m/s) | Impact energy in the end positions (J) | Max. force Fy (N) | Max. force Fz (N) | Max. torque Mx (Nm) | Max. torque My (Nm) | Max. torque Mz (Nm) | Theoretical force at 6 bar, retracting (N) | Theoretical force at 6 bar, advancing (N) | Moving mass (g) | Housing material | Cover material | Seals material | Min. Operating pressure (bar) | Max. Operating pressure (bar) | Min. Ambient temperature (°C) | Max. Ambient temperature (°C) | Distance of centre of gravity of payload to yoke plate xs (mm) | Max. static moment Mx (Nm) | Max. static moment My (Nm) | Max. permissible torque load Mx as a function of the stroke (Nm) | Max. force Fz static (N) | Max. force Fy static (N) | Center of gravity of the moving mass as a function of the stroke (mm) | Max. static moment Mz (Nm) | Max. payload as a function of the stroke at defined distance xs (N) | Operating medium | Corrosion resistance class (CRC) | Stroke (mm) | Manufacturer part # | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,767.78 | 1 Piece(s) | Quote | - | - | 16 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | - | - |
Loading...
Basic Information
| Piston rod material | High-alloy stainless steel |
|---|
Please check the type/dimensions/specifications of the part DFM-16-10-P-A-KF-F1A in the Linear drive, DFM Series series.
Specification/Dimensions
-
Stroke(mm)
-
Guide
- Recirculating ball bearing guide
- Sliding guide
-
Max. speed(m/s)
- 0.4
- 0.6
- 0.8
- 1.3
- 1.7
-
Impact energy in the end positions(J)
-
Max. force Fy(N)
-
Max. force Fz(N)
-
Max. torque Mx(Nm)
-
Max. torque My(Nm)
-
Max. torque Mz(Nm)
-
Theoretical force at 6 bar, retracting(N)
-
Theoretical force at 6 bar, advancing(N)
-
Moving mass(g)
- 8
- 9
- 10
- 11.5
- 13
- 18.5
- 21
- 155
- 165
- 170
- 172
- 175
- 186
- 193
- 196
- 200
- 206
- 212
- 221
- 229
- 232
- 237
- 241
- 242
- 246
- 249
- 253
- 257
- 264
- 289
- 294
- 310
- 318
- 343
- 359
- 364
- 376
- 385
- 388
- 392
- 400
- 415
- 428
- 471
- 488
- 512
- 552
- 582
- 584
- 595
- 611
- 626
- 632
- 650
- 669
- 672
- 680
- 687
- 711
- 732
- 755
- 793
- 802
- 863
- 875
- 895
- 904
- 915
- 955
- 979
- 996
- 1020
- 1049
- 1074
- 1077
- 1134
- 1173
- 1175
- 1191
- 1228
- 1254
- 1352
- 1371
- 1418
- 1433
- 1450
- 1559
- 1564
- 1597
- 1629
- 1720
- 1738
- 1743
- 1796
- 1803
- 1899
- 1969
- 1983
- 2003
- 2026
- 2183
- 2232
- 2241
- 2254
- 2287
- 2411
- 2413
- 2425
- 2471
- 2687
- 2699
- 2703
- 2731
- 2868
- 2870
- 2945
- 3130
- 3146
- 3221
- 3249
- 3313
- 3386
- 3569
- 3660
- 3692
- 3935
- 4010
- 4141
- 4375
- 4717
- 6076
- 6553
- 7113
-
Cover material
- High-alloy stainless steel
- Wrought aluminum alloy
-
Seals material
- NBR
-
Min. Operating pressure(bar)
- 0.5
- 1
- 1.5
- 2
-
Max. Operating pressure(bar)
- 8
- 10
-
Min. Ambient temperature(°C)
- -20
- -5
-
Max. Ambient temperature(°C)
- 60
- 80
-
Distance of centre of gravity of payload to yoke plate xs(mm)
- 10
- 25
- 50
- 125
-
Max. static moment Mx(Nm)
-
Max. static moment My(Nm)
-
Max. permissible torque load Mx as a function of the stroke(Nm)
- 0.006
- 0.007
- 0.008
- 0.011
- 0.034
- 0.039
- 0.046
- 0.057
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.61
- 0.65
- 0.66
- 0.72
- 0.73
- 0.81
- 0.88
- 1.14
- 1.18
- 1.23
- 1.28
- 1.3
- 1.44
- 1.52
- 1.56
- 1.64
- 1.68
- 1.7
- 1.75
- 1.77
- 1.79
- 1.85
- 2.03
- 2.08
- 2.1
- 2.19
- 2.24
- 2.35
- 2.43
- 2.63
- 2.8
- 2.9
- 2.92
- 2.95
- 3
- 3.2
- 3.36
- 3.8
- 3.81
- 3.9
- 4.1
- 4.2
- 4.23
- 4.33
- 4.64
- 5
- 5.43
- 5.5
- 5.7
- 5.76
- 5.77
- 5.8
- 5.94
- 6.14
- 6.2
- 6.4
- 6.5
- 6.64
- 6.7
- 6.86
- 7
- 7.09
- 7.2
- 7.3
- 7.49
- 7.66
- 7.71
- 7.74
- 7.77
- 7.9
- 8
- 8.6
- 8.64
- 8.7
- 9.08
- 9.6
- 9.62
- 10.25
- 10.7
- 11
- 11.6
- 11.8
- 12.04
- 12.3
- 12.5
- 12.8
- 13.1
- 13.3
- 13.68
- 13.78
- 14.1
- 14.4
- 14.76
- 15.51
- 15.66
- 15.77
- 15.9
- 16.43
- 16.77
- 17.62
- 17.92
- 18.67
- 19.35
- 21.3
- 21.4
- 21.98
- 23.5
- 24.2
- 47.8
-
Max. force Fz static(N)
-
Max. force Fy static(N)
-
Center of gravity of the moving mass as a function of the stroke(mm)
-
Max. static moment Mz(Nm)
-
Max. payload as a function of the stroke at defined distance xs(N)
- 0.5
- 0.65
- 0.85
- 1.1
- 2
- 2.4
- 3
- 3.7
- 19
- 20
- 21
- 22
- 23
- 24
- 28
- 31
- 37
- 39
- 41
- 42
- 44
- 45
- 46
- 49
- 51
- 53
- 55
- 56
- 58
- 61
- 63
- 64
- 67
- 73
- 77
- 78
- 82
- 86
- 95
- 96
- 102
- 103
- 105
- 108
- 110
- 112
- 115
- 116
- 119
- 121
- 123
- 126
- 127
- 135
- 138
- 143
- 144
- 146
- 149
- 150
- 151
- 155
- 161
- 166
- 168
- 173
- 174
- 180
- 188
- 189
- 200
- 202
- 212
- 214
- 216
- 229
- 233
- 234
- 235
- 238
- 257
- 274
- 276
- 304
- 311
- 509
-
Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
-
Corrosion resistance class (CRC)
- 0 - No corrosion stress
- 1 - Low corrosion stress
-
Piston diameter(mm)
-
Housing material
- Anodised wrought aluminium alloy
- Wrought aluminum alloy
- Wrought aluminum alloy, anodized
-
Stroke(mm)
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| DFM-10-5-P-A-GF |
| DFM-100-100-P-A-GF |
| DFM-100-125-P-A-GF |
| DFM-16-100-P-A-GF |
| DFM-16-100-P-A-GF-F1A |
| DFM-16-100-P-A-KF |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Pneumatic connection | Piston diameter (mm) | Guide | Max. speed (m/s) | Impact energy in the end positions (J) | Max. force Fy (N) | Max. force Fz (N) | Max. torque Mx (Nm) | Max. torque My (Nm) | Max. torque Mz (Nm) | Theoretical force at 6 bar, retracting (N) | Theoretical force at 6 bar, advancing (N) | Moving mass (g) | Housing material | Cover material | Seals material | Min. Operating pressure (bar) | Max. Operating pressure (bar) | Min. Ambient temperature (°C) | Max. Ambient temperature (°C) | Distance of centre of gravity of payload to yoke plate xs (mm) | Max. static moment Mx (Nm) | Max. static moment My (Nm) | Max. permissible torque load Mx as a function of the stroke (Nm) | Max. force Fz static (N) | Max. force Fy static (N) | Center of gravity of the moving mass as a function of the stroke (mm) | Max. static moment Mz (Nm) | Max. payload as a function of the stroke at defined distance xs (N) | Operating medium | Corrosion resistance class (CRC) | Stroke (mm) | Manufacturer part # | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,029.62 | 1 Piece(s) | Quote | 5 | M3 | 10 | Sliding guide | 1.7 | 0.035 | - | - | - | - | - | 47 | 68 | 10 | Wrought aluminum alloy, anodized | High-alloy stainless steel | NBR | 1.5 | 8 | - | - | 10 | - | - | 0.057 | - | - | - | - | 3.7 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | - | - | ||
MYR 8,363.51 | 1 Piece(s) | Quote | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
MYR 8,924.76 | 1 Piece(s) | Quote | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | ||
MYR 2,337.02 | 1 Piece(s) | Quote | 100 | M5 | 16 | Sliding guide | 0.8 | 0.15 | - | - | - | - | - | 90 | 121 | 471 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 2 | 10 | -20 | 80 | 50 | - | - | 1.14 | - | - | - | - | 49 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 1 - Low corrosion stress | - | 170839 | 1081 | ||
MYR 2,567.53 | 1 Piece(s) | Quote | - | - | 16 | - | - | - | - | - | - | - | - | - | - | - | Anodised wrought aluminium alloy | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 | - | - | ||
MYR 3,351.15 | 1 Piece(s) | Quote | 100 | M5 | 16 | Recirculating ball bearing guide | 0.8 | 0.15 | 778 | 778 | 17.9 | 10.5 | 10.5 | 90 | 121 | 392 | Wrought aluminum alloy | Wrought aluminum alloy | NBR | 2 | 10 | -5 | 60 | 50 | 19.09 | 11.2 | 1.77 | 830 | 830 | 56.5 | 11.2 | 58 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 0 - No corrosion stress | - | 170914 | 982 |
Additional Products in this Category
- Super rodless cylinder SRM3 series with rodless form high-precision guide
- Linear slide cylinder with composite-function LCX series
- Air Slide Table, Both Sides Piping Type, MXQ□A Series
- Air Slide Table / MXY Series
- Air Slide Table MXJ Series
- Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY1H-Z Series
- Sine Rodless Cylinder, Basic Type REA Series
- Guide, FENG Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy