(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
3-point Grabber, DHDS Series
Part Number
Configured Part Number is shown.
DHDS-32-A-NC
- Download
Product Details - CAD Data unavailable
3-point grabber, DHDS Series
Features
Specifications
| Size | 16 | 32 | 50 |
|---|---|---|---|
| Design | Lever | ||
| Guided motion sequence | |||
| Mode of operation | Double-acting | ||
| Gripper function | 3-point | ||
| Gripping force backup | NC | NC | NC |
| Number of gripper jaws | 3 | ||
| Max. load per gripper finger [g] | 50 | 150 | 250 |
| Stroke per gripper jaw [mm] | 2.5 | 3.9 | 6 |
| Pneumatic connection | M3 | M5 | G1/8 |
| Repetition accuracy [mm] | ≤ 0.04 | ||
| Max. interchangeability [mm] | ≤ ±0.2 | ||
| Max. operating frequency [Hz] | ≤ 4 | ||
| Rotational symmetry [mm] | < Ø 0.2 | ||
| Position sensing | Via position sensor | Via proximity switch, position transmitter | |
| Type of mounting | With female thread and dowel pin | ||
| Mounting position | Any | ||
Operating and environmental conditions
| Min. operating pressure | DHDS-...-A [bar] | 2 |
|---|---|---|
| DHDS-...-A-NC [bar] | 4 | |
| Max. operating pressure [bar] | 8 | |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | |
| Note on operating/pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | |
| Ambient temperature [°C] | +5...+60 | |
| Corrosion resistance class CRC | 1 | |
| Part Number |
|---|
| DHDS-32-A-NC |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
MYR 7,967.53 | 1 Piece(s) | Quote |
Loading...
Basic Information
| Number of gripper jaws | 3 pcs. | Operating Pressure Range(MPa) | 0.4::0.8 | Size | 32 |
|---|---|---|---|---|---|
| Stroke per gripper jaw(mm) | 3.9 | Pneumatic gripper repetition accuracy(mm) | ≤ 0.04 | Max. operating frequency of pneumatic gripper(Hz) | ≤ 4 |
| Min. opening time at 6 bar(ms) | 55 | Min. closing time at 6 bar(ms) | 47 | Mass moment of inertia(kgcm²) | 0.82 |
| Maximum force on gripper jaw Fz, static(N) | 150 | Maximum torque on gripper jaw, Mx static(Nm) | 9 | Maximum torque on gripper jaw, My static(Nm) | 9 |
| Maximum torque on gripper jaw, Mz static(Nm) | 9 | Max. mass per external gripper finger(g) | 150 | Pneumatic connection | M5 |
| Housing material | Wrought aluminum alloy, Hard-anodized | Gripper jaw material | High-alloy stainless steel | Cover cap material | PA |
| Min. Ambient temperature(°C) | 5 | Max. Ambient temperature(°C) | 60 | Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress | Manufacturer part # | 1259494 | Weight(g) | 281 |
Please check the type/dimensions/specifications of the part DHDS-32-A-NC in the 3-point Grabber, DHDS Series series.
Specification/Dimensions
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Closed Chuck, Floating Attachment Panel Mount Type, Chuck Direction Perpendicular
- Gripper, Open Chuck Shank Type
- Gripper, Closed Chuck Shank Type (2-Screw Mounting Method)
- Gripper, Chuck Powerful Chuck CKL Series
- HLAG Series Bushing Type Rubber-coated Slim Parallel Hand
- Hand Small Crossed Roller Parallel Hand BHA Series
- Gripper, Robot Peripheral Equipment Auto Hand Changer KHA Series
- Parallel Opening/Closing Air Chuck Wide Type MHL2 Series Replacement Parts
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy