[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Temperature Controller (Digital Controller) [E5CD/E5CD-B] (E5CD-RX2A6M-002)

OMRON

Part Number

Configured Part Number is shown.

E5CD-RX2A6M-002

Product Specifications
Part Numbers
Catalog

Dimensional Drawing of OMRON Temperature Controllers

Temperature Controllers E5CD

Temperature Controller (Digital Controller) [E5CD/E5CD-B] E5CD Outline Drawing

Temperature Controllers E5CD-B

Temperature Controller (Digital Controller) [E5CD/E5CD-B] E5CD-B Outline Drawing

Specification Table of OMRON Temperature Controllers

Temperature Controllers Names of each part

Temperature Controller (Digital Controller) [E5CD/E5CD-B] Parts Name Diagram

Temperature Controllers Ratings/Performance

Temperature Controllers Rating

Power supply voltage		Power supply voltage Type A: AC100-240V 50/60Hz Power supply voltage Type D: AC24V 50/60Hz /DC24V
Allowable voltage fluctuation range		85 to 110% of power supply voltage
Power Consumption		Option -000 type: 5.2VA or less (AC100-240V), 3.1VA or less (AC24V) / 1.6W or less (DC24V) Other than the above: 6.5VA or less (AC100-240V), 4.1VA or less (AC24V) / 2.3W or less (DC24V)
Sensor Input		Temperature Controllers input Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, PLII Platinum resistance thermometer: Pt100, JPt100 Non-contact Temperature Controllers sensor (ES1B): 10 to 70°C, 60 to 120°C, 115 to 165°C, 140 to 260°C Analog input Current input: 4 to 20mA, 0 to 20mA Voltage input: 1 to 5V, 0 to 5V, 0 to 10V
Input impedance		Current input: 150 Ω or less, voltage input: 1 MΩ or more (When connecting to ES2-HB-N/THB-N, use a 1:1 connection.)
Temperature Controllers Method		ON/OFF or 2-degree-of-freedom PID (with autotuning)
Temperature Controllers Output	Relay Output	1a AC250V 3A (resistive load) Electrical life 100,000 times Minimum applicable load 5V 10mA (reference value)
	Voltage output (for driving SSR)	Output voltage DC12V±20% (PNP) Maximum load current 21mA, with short circuit protection circuit
	Linear Current Output	DC4~20mA/DC0~20mA Load: 500Ω or less Resolution: Approx. 10,000
Auxiliary Output	Score	2 points
Auxiliary Output	Output Specifications	Relay output 1a AC250V, E5CD 3A (resistive load), E5CD-B 2A (resistive load) Electrical life 100,000 times Minimum applicable load 5V 10mA (reference value)
Event Input	Score	2 points
	External contact input specifications	During contact input: ON: 1kΩ or less OFF: 100kΩ or more
		Non-contact input: ON: Residual voltage 1.5V or less OFF: Leakage current 0.1mA or less
		Current output: Approx. 7mA (per contact)
Transmission Output	Score	1 point (depending on the model): Type with transmission output
Transmission Output	Output Specifications	Current output: DC4-20mA Load: 500Ω Resolution: Approx. 10,000 Linear voltage output: DC1-5V Load: 1kΩ or more Resolution: Approx. 10,000
Setting method		Digital setting by front keys
Instruction method		11-segment digital display, single-light-emitting display, bar display character height PV: 14.9 mm, SV: 7.1 mm
Multi-SP function*		Up to eight target values (SP0 to SP7) can be stored and selected by event input, key operation, or serial communication
Bank switching function		none
Other features		Adaptive Temperature Controllers, automatic filter adjustment function, water-cooled output adjustment function, predictive data (power-on time monitor, ambient temperature monitor, control output ON/OFF count monitor), parameter mask function, operation specification function at power-on, manual output, heating/cooling control, loop break alarm function, SP lamp, alarm function, heater break detection function (including SSR failure), 40% AT, 100% AT, manipulated variable limit, input digital filter, robust tuning, PV input correction, run/stop, protect, square root calculation function, manipulated variable change rate limit, simple calculation, temperature status display function, simple program function, input moving average, display brightness setting
Ambient Temperature Controllers		-10 to +55°C (but no condensation or freezing) / 3-year warranty: -10 to +50°C (but no condensation or freezing) when installed as a standard unit
Ambient humidity		Relative humidity 25-85%
Storage temperature		-25 to +65°C (but no condensation or freezing)
Altitude		Under 2,000m
Recommended fuse		T2A, AC250V Time-lag low breaking capacity
Installation environment		Overvoltage Category II, Pollution Degree 2 (EN/IEC/UL 61010-1)

* If you select from event input, the maximum number of target values is 4.

Temperature Controllers Performance

Voltage effect *2
Indication accuracy (ambient temperature 23℃)		Thermocouple: (±0.3% of indicated value or ±1°C, whichever is greater) ±1 digit or less *1 Platinum resistance thermometer: (±0.2% of indicated value or ±0.8°C, whichever is greater) ±1 digit or less Analog input: ±0.2%FS ±1 digit or less CT input: ±5%FS ±1 digit or less
Transmission Output Accuracy		±0.3%FS or less
Temperature Controllers effect *2		Thermocouple input (R, S, B, C/W, PLII): (±1% of indicated value or ±10°C, whichever is greater) ±1 digit or less Other thermocouple input: (±1% of indicated value or ±4°C, whichever is greater) ±1 digit or less *3 Platinum resistance thermometer input: (±1% of indicated value or ±2°C, whichever is greater) ±1 digit or less Analog input: ±1%FS ±1 digit or less CT input: ±5%FS ±1 digit or less
Effects of electromagnetic interference (according to EN 61326-1)
Input Sampling Period		50ms
Adjustment Sensitivity		Temperature input: 0.1 to 999.9°C/°F (in 0.1°C/°F increments) Analog input: 0.01 to 99.99%FS (in 0.01%FS increments)
Proportional band (P)		Temperature Controllers input: 0.1 to 999.9°C/°F (in 0.1°C/°F units) Analog input: 0.1 to 999.9%FS (in 0.1%FS units)
Integration time (I)		0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
Differential time (D)		0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
Cooling proportional band (P)		Temperature Controllers input: 0.1 to 999.9°C/°F (in 0.1°C/°F units) Analog input: 0.1 to 999.9%FS (in 0.1%FS units)
Cooling integration time (I)		0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
Cooling differential time (D)		0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
Dedicated to adaptive control	Proportional band for target response (P)	Temperature Controllers input: 0.1 to 999.9°C/°F (in 0.1°C/°F increments)
	Integral time for target response (I)	0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
	Derivative time for target response (D)	0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
	Proportional band for disturbance (P)	Temperature Controllers input: 0.1 to 999.9°C/°F (in 0.1°C/°F increments)
	Disturbance integral time (I)	0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
	Disturbance Differential Time (D)	0 to 9999s (in 1s units), 0.0 to 999.9s (in 0.1s units) *4
Control Period		0.1, 0.2, 0.5, 1 to 99 s (in 1 s increments)
Manual Reset Value		0.0 to 100.0% (in 0.1% increments)
Alarm Setting Range		-1999 to 9999 (decimal point position depends on input type)
Effect of signal source resistance		Thermocouple: 0.1℃/Ω or less (100Ω or less), Platinum resistance thermometer: 0.1℃/Ω or less (10Ω or less)
Insulation resistance		20MΩ or more (500V DC applied)
Withstand voltage		AC3,000V 50 or 60Hz 1min (opposite polarity live terminals)
vibration	malfunction	10~55Hz 20m/s² 3 axis direction 10min
vibration	Durability	10~55Hz 20m/s² 3 axial directions 2h
impact	malfunction	100m/s2³ axial directions, 3 times each
impact	Durability	300m/s2³ axial directions, 3 times each
mass		Main unit: Approx. 120g Mounting adapter: Approx. 10g
Protective structure		Front: IP66, Rear case: IP20, Terminal: IP00
Memory Protection		Non-volatile memory (number of writes: 1 million times)
Configuration Tool		E5CD: CX-Thermo Ver.4.66 or higher E5CD-B: CX-Thermo Ver.4.67 or higher
Configuration tool port		Top of E5CD/E5CD-B: Use the E58-CIFQ2 USB-serial conversion cable to connect to the USB port on the computer. *5
standard	Certification Standards	cULus: UL 61010-1/CSA C22.2 No.61010-1, Korea Wireless Regulations (Radio Act: KC Mark)
standard	Compliance standards	EN 61010-1 (IEC 61010-1), RCM standard
EMC Directive		EMI EN 61326-1 6 Radiated interference field strength EN 55011 Group1 class A Noise terminal voltage EN 55011 Group1 class A EMS EN 61326-1 6 Electrostatic discharge immunity EN 61000-4-2 Electromagnetic field immunity EN 61000-4-3 Burst noise immunity EN 61000-4-4 Conducted interference immunity EN 61000-4-6 Surge immunity EN 61000-4-5 Voltage dip/interruption immunity EN 61000-4-11

*1. K (-200 to 1300°C range), T, N below -100°C, and U, L are within ±2°C ±1 digit. B below 400°C is not specified. B from 400 to 800°C is within ±3°C.
R, S below 200°C is within ±3°C ±1 digit. C/W is (±0.3% PV or ±3°C, whichever is greater) ±1 digit.
PLII is (±0.3% PV or ±2°C, whichever is greater) ±1 digit.
*2. Conditions: Ambient Temperature Controllers: -10°C to 23°C to 55°C Voltage range: -15 to +10% of rated voltage
*3. K sensor below -100°C is within ±10°C
*4. The unit depends on the "Integral/Differential time unit" setting.
*5. External serial communication (RS-485) and USB-serial conversion cable communication can be used simultaneously.
*6. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

: 30; 45; 60

Part Number
E5CD-RX2A6M-002

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Output Type	Failure Detecting Function	Power Supply Voltage (V)	Control Output 1	Terminal shape	Event Input (Point)	Heater Breakage, SSR Fault Detection Capability	Communication	Transmission Output
	MYR 1,480.11	1 Piece(s)		5 Day(s) or more	Relay contact	Heater Breakage / SSR Breakdown	100 to 240 AC	Relay output	Screw terminal block type	-	1 point	RS-485	-

Basic Information

Input Method	Thermocouple / Platinum temperature measuring resistor / Non-Contact Temperature Sensor / Voltage / Current	Control Method	ON/OFF Control / PID control with auto tuning	Number of Control Points	1
Setting Method	Key input	Control Output 2	NA	Auxiliary Output Points	2 independent
Specifications	48×48 mm	Input type	Full multi input

Please check the type/dimensions/specifications of the part E5CD-RX2A6M-002 in the Temperature Controller (Digital Controller) [E5CD/E5CD-B] series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Failure Detecting Function
- No
- Heater Breakage
- SSR Breakdown
Clear
Event Input(Point)
- 2
Clear
Transmission Output
- Available
Clear
type
- E5CD
- E5CD-B
Clear
Output Type
- Relay contact
- SSR Drive Output Voltage
- Current
Clear
Power Supply Voltage(V)
- 24 AC/DC
- 100 to 240 AC
Clear
Control Output 1
- Linear current output
- Relay output
- Voltage output (for SSR drive)
Clear
Terminal shape
- Push-in plus terminal block type
- Screw terminal block type
Clear
Heater Breakage, SSR Fault Detection Capability
- 1 point
Clear
Communication
- RS-485
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
E5CD-CX2ABM-000
E5CD-CX2ABM-004
E5CD-CX2D6M-000
E5CD-RX2ABM-000
E5CD-RX2ABM-002
E5CD-RX2D6M-000

Standard Unit Price	Minimum order quantity	Days to Ship	Output Type	Failure Detecting Function	Power Supply Voltage (V)	Control Output 1	Terminal shape	Event Input (Point)	Heater Breakage, SSR Fault Detection Capability	Communication	Transmission Output
MYR 1,153.29	1 Piece(s)	9 Day(s) or more	Current	No	100 to 240 AC	-	Push-in plus terminal block type	-	-	-	-
MYR 1,637.22	1 Piece(s)	9 Day(s) or more	Current	No	100 to 240 AC	-	Push-in plus terminal block type	2	-	RS-485	-
MYR 1,075.24	1 Piece(s)	9 Day(s) or more	Current	No	24 AC/DC	-	Screw terminal block type	-	-	-	-
MYR 1,008.78	1 Piece(s)	9 Day(s) or more	Relay contact	No	100 to 240 AC	-	Push-in plus terminal block type	-	-	-	-
MYR 1,542.98	1 Piece(s)	9 Day(s) or more	Relay contact	SSR Breakdown / Heater Breakage	100 to 240 AC	-	Push-in plus terminal block type	-	1 point	RS-485	-
MYR 958.57	1 Piece(s)	9 Day(s) or more	Relay contact	No	24 AC/DC	Relay output	Screw terminal block type	-	-	-	-

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Temperature Controller (Digital Controller) [E5CD/E5CD-B] (E5CD-RX2A6M-002)

Dimensional Drawing of OMRON Temperature Controllers

Temperature Controllers E5CD

Temperature Controllers E5CD-B

Specification Table of OMRON Temperature Controllers

Temperature Controllers Names of each part

Temperature Controllers Ratings/Performance

Basic Information

Configure

Specification/Dimensions

Failure Detecting Function

Event Input(Point)

Transmission Output

type

Output Type

Power Supply Voltage(V)

Control Output 1

Terminal shape

Heater Breakage, SSR Fault Detection Capability

Communication

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm