[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Air Cooled Aftercooler HAA Series (HAA15-103DFS-T)

This air-cooled aftercooler does not require cooling equipment, and maintenance is easy without concerns about water supply cut-off or freezing.
[Features]
· Cools high temperature compressed air from a compressor down to 40°C or less and removes moisture from the air.
· Compact size and light weight.
· Uses minimal floor space.
· Built-in drain separator.
· Dust-protecting filter optional.

(i)Caution

■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.

■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018.
See catalog for specification details.
Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Part Number

Configured Part Number is shown.

HAA15-103DFS-T

Product Specifications
Part Numbers
Catalog

Air Cooled Aftercooler HAA Series Features

HAA15 external appearance

HAA7 external appearance

Working Principle

Specifications

Model			HAA7		HAA15		HAA22	HAA37
Rated conditions	Air flow capacity L/min (ANR)^*1		1,000		2,200		3,300	5,700
	Inlet air temperature (°C)		70
	Inlet air pressure (MPa)		0.7
	Ambient temperature (°C)		32
	Outlet air temperature (°C)		40
Operating range	Applicable fluid		Compressed Air
	Inlet air temperature (°C)		5 to 100
	Inlet air pressure (MPa)		0.05 to 1.0 (With auto drain: 0.15 to 1.0)				0.05 to 0.97 (With auto drain: 0.15 to 0.97)
	Ambient temperature (°C)		2 to 50
	Installation location		Indoors
Electric specifications	Power supply		Single-phase 100 V AC (50/60 Hz)	Single-phase 200 V AC (50/60 Hz)	Single-phase 100 V AC (50/60 Hz)	Three-phase 200 V AC (50/60 Hz)	Three-phase 200 V AC (50/60 Hz)	Three-phase 200 V AC (50/60 Hz)
	Power consumption (W)	50 Hz	55	58	55	50	90	204
	Power consumption (W)	60 Hz	58	65	65	60	130	244
	Current (A)	50 Hz	0.8	0.43	0.8	0.4	0.4	2.0
	Current (A)	60 Hz	0.81	0.46	0.9	0.35	0.45	2.0
Proof pressure (MPa)			1.5
Cooling fan diameter (mm)			255		300		400	350 × 2 pcs.
Cooler			Aluminum plate tube with fins
Port size for inlet/outlet air			Rp3/4 socket		1B union		1 1/2 B union
Port size for drain outlet piping (With auto drain)			Rc 3/8 (Rc 3/8)					Rc 1/2 (Rc 3/8)
Weight (kg)			18		24		36	55
Coating color			Munsell N-8 (white), Munsell 2.5PB5/8.5 (blue)
Applicable compressor (kW)^*2			7.5		15		22	37
Standard equipment	Thermometer for outlet air temperature (1 pc.)		-		●		●	●
Accessories^*3	Drain valve (1 pc.)		3/8B					1/2B
Accessories^*3	Union (2 pcs.)		-		1B		1 1/2 B

*1: ANR is the value at 20°C, atmospheric pressure and relative humidity 65%.
*2: The applicable compressor is based on the discharge rate and discharge temperature (70°C) of a screw-type compressor.
*3: Accessories should be mounted by the user.

Dimensions

(Unit: mm)

Dimensions: HAA7

(Unit: mm)

HAA15-22 dimensions

(Unit: mm)

HAA37 dimensions

(Unit: mm)

Model	Piping connection port diameter	A	B	C	D	E	F	G	H	J	K	L	M	N	P	Q	R	S
HAA15	1^B union	460	394	33	70	59	485	428	320	150	150	320	70	58	200	480	220	225
HAA22	1 1/2^B union	588	484	52	70	60	580	505	333	150	150	400	94	65	200	610	220	238

How to Calculate Outlet Air Temperature

The outlet air temperature can be calculated by the inlet air temperature, ambient temperature and air flow capacity using the following procedure.

(Example) Inlet air temperature: 100°C, Ambient temperature: 20°C, Air flow capacity: 2,000 L/min (ANR), Air pressure:
0.7 MPa, Model: HAA22-14

Correction factor by ambient temperature

1. Use an outlet air temperature of 38.5°C from the Outlet Air Temperature table. In this case, use correction factor line A.
2. Next, use the correction factor by ambient temperature chart to obtain a correction factor of 1.35 at the ambient temperature of 20°C on line A.
3. Divide 38.5°C (from step 1) by 1.35 (from step 2) to obtain the outlet air temperature. Outlet air temperature = 38.5 ÷ 1.35 = 28.5°C

Outlet Air Temperature

Model	Correction factor line	Air flow (L/min [ANR])	Inlet air temperature
Model	Correction factor line	Air flow (L/min [ANR])	50°C	70°C	100°C
HAA7	(A)	500	34.5	35	35.5
	(B)	1,000	38	40	42.5
	(C)	1,500	40	44	47.5
HAA15	(A)	1,000	33	35.5	36
	(B)	2,200	36.5	40	42.5
	(C)	3,000	38	42	44
HAA22	(A)	2,000	34	37	38.5
	(B)	3,300	36	40	42.5
	(C)	4,000	37	41.5	45
HAA37	(A)	4,000	34	38	39
	(B)	5,700	35	40	43
	(C)	7,000	36	42	45

Conditions:

Air pressure 0.7 MPa, ambient temperature 32°C.
An inlet air temperature of 50°C is saturated air. At 70°C or more, it is humid air with a dew point of 67°C.

Precautions

Caution on Design

Caution

1. Do not obstruct the aftercooler's vent inlet and outlet, and be sure to install the aftercooler more than 20 cm away from the walls and other equipment.
2. Install the aftercooler in a location that facilitates maintenance and inspection.
3. Install the aftercooler in a location with minimal vibrations.
4. Because the surrounding temperature increases due to the exhaust heat from the aftercooler, ventilate the area with an exhaust fan, etc.
5. The air-cooled type aftercooler cannot be used in a location where the temperature exceeds 50°C. To use in such a location, use a water-cooled type aftercooler instead.
6. The maximum allowable temperature of the inlet air is 100°C.
If the inlet air exceeds this temperature, select an appropriate water-cooled type aftercooler.
7. Prevent fins from becoming clogged. Do not use this aftercooler in an area that has viscous dust (electrostatic paint powder, oily particles, etc.). If it must be used under such conditions due to unavoidable circumstances, please contact the manufacturer support center beforehand.

Mounting

Caution

1. Do not interchange the connections to the compressed air inlet and the compressed air outlet. When tightening the air inlet and outlet piping, make sure to use a pipe wrench to hold the inlet and outlet nozzles of the product.
2. Connect a drain pipe because drainage is created when the compressed air is cooled.
3. The drain pipe must have a minimum pipe bore of 10 mm and a maximum length of 5 m (when installing an optional auto-drain).

Maintenance

If the aftercooler is equipped with an auto drain, the following mounting frame is necessary. Mounting frame (Option: Refer to p. 11 Accessories)

Caution

1. Inspect the cooler at least once a week, and clean it to prevent it from becoming obstructed.
2. Discharge the drainage on a regular basis in accordance with the amount of drainage that is created. (The optional auto drain is recommended for automatic discharge.)

*See the manufacturer's catalog for other specifications, etc.

: 30; 45; 60

Part Number
HAA15-103DFS-T

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Air compressor size (screw type) (KW)	Piping connection port diameter	Power supply voltage (V)	Auto drain	Filter for dust intrusion prevention	Frame	Terminal
	MYR 9,194.11	1 Piece(s)		26 Day(s) or more	15	1B	Three-phase 200	With auto drain	With dust-protecting filter	With mounting frame	With terminal

Basic Information

Type	After Cooler

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- HAA15
- HAA22
- HAA37
- HAA7
Clear
Air compressor size (screw type)(KW)
- 7.5
- 15
- 22
- 37
Clear
Piping connection port diameter
- 1B
- 1 1/2 B
- Rp3/4
Clear
Power supply voltage(V)
- Single-phase 100
- Single-phase 200
- Three-phase 200
Clear
Auto drain
- None
- With auto drain
Clear
Filter for dust intrusion prevention
- None
- With dust-protecting filter
Clear
Frame
- None
- With mounting frame
Clear
Terminal
- None
- With terminal
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

26 Day(s) or Less

27 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Air Cooled Aftercooler HAA Series (HAA15-103DFS-T)

(i)Caution

Air Cooled Aftercooler HAA Series Features

Specifications

Dimensions

How to Calculate Outlet Air Temperature

Outlet Air Temperature

Precautions

Caution on Design

Mounting

Maintenance

Basic Information

Configure

Specification/Dimensions

type

Air compressor size (screw type)(KW)

Piping connection port diameter

Power supply voltage(V)

Auto drain

Filter for dust intrusion prevention

Frame

Terminal

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm