(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Vacuum Switch Diaphragm Type ZSM1-115/121 Series
Can be mounted on ejector system ZM series
(i)Caution
- Product images may be representative images. Refer to the manufacturer's catalog for details
Part Number
Configured Part Number is shown.
Specifications of Vacuum Pressure Switch / Diaphragm Type
External appearance of vacuum pressure switch / diaphragm type
Connection method of ZSM1-115
Internal circuit of ZSM1-115
- Brown lead wire: Connect to the power supply (+) terminal is necessary to operate the switch main circuit.
- Black lead wire: Connect to the load. (PLC input, relay)
- Blue lead wire: Connect to the power supply GND terminal.
Internal circuit of ZSM1-121
Specifications
| Model | ZSM1-115 | ZSM1-121 |
|---|---|---|
| Switch specifications | Solid state | Contact (Reed Switch) |
| Fluid | Air and inert gas | |
| Maximum operating pressure | 0.5 MPa | |
| Set pressure range | -27 to -80 kPa | |
| Hysteresis | Max. 15 kPa | Max. 20 kPa |
| Repeat accuracy | ±10% or less | |
| Ambient and fluid temperature | -5～+60℃ (No freezing) | |
| Supply voltage | DC4.5 to 28 V | 100 V AC/DC or less |
| Indicator Light | ON lights | |
| Lead number | 3 | 2 |
| Port Size | R1/8 | |
| Weight | 65 g | |
Electrical Specifications
ZSM1-115
- Supply voltage: DC4.5 to 28 V
- Output (Open Collector): 28 V. Max 40 mA
- Current Consumption: 10 mA or less (DC24V)
ZSM1-121
- Supply voltage: AC／DC100V
- Maximum operating current range: 24 V or less: 50 mA, 48 V: 40 mA, 100 V: 20 mA
- Max. Contact Capacity: AC2VA, DC2W
Dimensions
(Units: mm)
Dimensional drawing of vacuum pressure switch / diaphragm type
Dimensional drawing of ZSM1-115
Dimensional drawing of ZSM1-121
Notes
Wiring
Contact protection box internal circuit
- * 1Do not apply pulling force to the power cord. It may cause damage.
- * 2Wiring precautions for ZSM1-121: When ZSM1-121 is connected in series, a voltage drop occurs due to the internal resistance of the light emitting diode. The voltage drop is approx. 2 V per switch. After checking the minimum drive voltage on the drive side, use within the range possible.
- * 3Since it does not have a built-in contact protection circuit, use the contact protection box (CD-P11) with an inductive load or a lead wire of 5 m or longer.
- * 4Contact protection box / connection method: To connect the switch body to the contact protection box, connect the lead wire on the side labeled SWITCH on the contact protection box and the lead wire from the switch body. Also, keep the lead wire length between the switch body and the contact protection box within 1 m, and set it as close as possible.
Mounting/Piping
The main body must not be turned with a wrench
- * 1When handling the product, always hold it by the body and do not apply pulling force to the power cord.
- * 2When handling, do not drop or hit. It may cause damage.
- * 3When mounting on the pipe, apply a wrench to the fitting and screw in. Turning the main body with a wrench may cause damage.
- * 4The mounting direction can be horizontal or vertical.
Pressure source
- * 1When used as a suction confirmation switch, do not suck in water. It may cause malfunction or damage
- * 2Operating fluids are dedicated for air and inert gas. Corrosive fluid cannot be used.
- *See the SMC catalog for information other than that detailed above.
| Part Number |
|---|
| ZSM1-015 |
| ZSM1-015L |
| ZSM1-021 |
| ZSM1-021L |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pipe Port Type | Plumbing Thread Type | Plumbing Thread Nominal | Fluid Characteristics | Power Supply Type | Power Supply Voltage (V) | Lead Wire | Hysteresis (MPa) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 451.70 | 1 Piece(s) | 13 Day(s) or more | [Direct Mounting] ZM Ejector Mount | - | - | - | DC | 4.5 to 28 | 0.5 m | 0.015 | ||
MYR 487.52 | 1 Piece(s) | 17 Day(s) or more | [Direct Mounting] ZM Ejector Mount | - | - | Inert | DC | 4.5 to 28 | 3 m | 0.015 | ||
MYR 527.08 | 1 Piece(s) | 21 Day(s) | [Direct Mounting] ZM Ejector Mount | - | - | Inert | AC/DC | 100 | 0.5 m | 0.02 | ||
MYR 580.05 | 1 Piece(s) | 21 Day(s) | [Direct Mounting] ZM Ejector Mount | - | - | Inert | AC/DC | 100 | 3 m | 0.02 |
Loading...
Basic Information
| Type | Pressure Switch | Fluid Type | Air / Nitrogen Gas / Carbonic Acid Gas / City Gas / Methane Gas / Propane gas | Sensor, Monitor Structure | Separate Type, Connector Joint |
|---|---|---|---|---|---|
| Output Method | Switch | Operating Temperature Range(°C) | -5::60 | Number of Input Points | 1 |
| Number of Output Points | 1 | Pipe Connection Direction | Down | Acquired Standards | CE |
Specification/Dimensions
-
Plumbing Thread Type
- Rc (R)
- NPT
- Rc (R)
-
Plumbing Thread Nominal
- 1/8
- 1/8
-
Power Supply Type
- DC
- AC/DC
-
Power Supply Voltage(V)
- 100
- 4.5 to 28
-
Lead Wire
- 0.5 m
- 3 m
-
Hysteresis(MPa)
- 0.015
- 0.02
-
type
- ZSM1
-
Pipe Port Type
- Threads
- Direct Mounting
- Threads
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 17 Day(s) or Less
- 21 Day(s) or Less
- 23 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pneumatic Pressure Switch, Electric Compact Pressure Switch, PPE Series
- Flow Switch, Paddle Style Flow Switch IF3 Series
- Compact Pneumatic Pressure Sensor PSE540 Series
- 3-Color Display Digital Flow Monitor For Water PF3W3 Series
- 3-Screen Digital Display Setting Device PSE300AC Series
- 3-Color Display, Digital Flow Switch for Water Rechargeable Battery Compatible 25 A-PF3W Series
- Amplifier Module
- 3-Screen Multi-Channel Digital Display Setting Device, PSE200A Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy