[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Speed Controller With Pilot Check Valve, ASP Series (ASP430F-02-06S-J)

Cylinder temporary stop and cylinder speed control are possible.
[Features]
・ The pilot check valve and speed controller are integrated.
・ Tube mounting direction can be freely adjusted 360°
・ Electroless nickel plating specifications as standard
・ Available in metric size and inch size

(i)Caution

Product images may be representative images. Refer to the catalog for details

Part Number

Configured Part Number is shown.

ASP430F-02-06S-J

Product Specifications
Part Numbers
Catalog

Speed Controller With Pilot Check Valve ASP Series Specifications

Speed Controller With Pilot Check Valve external appearance

Example of drop prevention circuit

JIS symbol

Fluid	Air
Proof pressure	1.5 MPa
Maximum operating pressure	1 MPa
Minimum operating pressure	0.1 MPa
Pilot check valve operating pressure	50% or more of the operating pressure (however, must be 0.1 MPa or more)
Ambient and fluid temperature	-5 to +60°C (no freezing)
Applicable tubing material	Nylon, soft nylon, polyurethane

*Use caution regarding the maximum operating pressure when using soft nylon or polyurethane tubing.

Dimensional Drawing of This Product (Metric Size)

Speed Controller With Pilot Check Valve, dimensional drawing (metric size)

(Units: mm)

Model	d	T1	T2	H1	H2	D1	D2	D3	L1	L2	L3	L4^*1		L5	A1^*2	A2^*2	M	Weight g
Model	d	T1	T2	H1	H2	D1	D2	D3	L1	L2	L3	Max.	MIN.	L5	A1^*2	A2^*2	M	Weight g
ASP330F-01-06S	6	R 1/8	M5 × 0.8	12	8	11.6	14.2	11.8	14	38.4	22.9	39.6	34.6	38.6	35.2	10.5	13.7	32
ASP330F-01-08S	8	R 1/8	M5 × 0.8	12	8	15.2	14.2	11.8	15.8	44.7	28.2	38.9	33.9	38.6	35.2	10.5	18.7	35
ASP430F-02-06S	6	R 1/4	1/8	17	12	12.8	18.5	15	18	43.4	25.2	41.7	36.7	48.2	42.4	10.9	16.8	65
ASP430F-02-08S	8	R 1/4	1/8	17	12	15.2	18.5	15	19.7	46.4	28.2	41.7	36.7	48.2	42.4	10.9	18.7	68
ASP530F-03-08S	8	R 3/8	1/8	19	12	15.2	23	19.8	20.3	51.3	28.2	46.9	41.9	55.1	50	14.4	18.7	107
ASP530F-03-10S	10	R 3/8	1/8	19	12	18.5	23	19.8	23.1	54.1	32.6	46.9	41.9	55.1	50	14.4	20.8	110
ASP630F-04-10S	10	R 1/2	1/4	24	17	18.5	28.6	26.5	25.9	64.2	32.6	64.8	57.3	69.4	61.8	18.3	20.8	212
ASP630F-04-12S	12	R 1/2	1/4	24	17	20.9	28.6	26.5	25.9	66	34.4	64.8	57.3	69.4	61.8	18.3	21.8	215

*1: Reference dimensions.
*2: Reference dimensions of R thread after installation.

Dimensional Drawing of This Product (Inch Size)

Speed Controller With Pilot Check Valve dimensional drawing (inch size)

(Units: inches)

Model	d	T1	T2	H1	H2	D1	D2	D3	L1	L2	L3	L4^*1		L5	A1^*2	A2^*2	M	Weight g
Model	d	T1	T2	H1	H2	D1	D2	D3	L1	L2	L3	Max.	MIN.	L5	A1^*2	A2^*2	M	Weight g
ASP330F-N01-07S	1/4 "	NPT 1/8	10-32UNF	1/2 "	8	13.2	14.2	11.8	15.8	42.2	25.6	38.9	33.9	38.6	35.1	10.5	17	35
ASP330F-N01-09S	5/16 "	NPT 1/8	10-32UNF	1/2 "	8	15.2	14.2	11.8	15.8	44.7	28.2	38.9	33.9	38.6	35.1	10.5	18.7	35
ASP430F-N02-07S	1/4 "	NPT 1/4	NPT 1/8	11/16 "	1/2 "	13.2	18.5	15	18	43.9	25.6	41.7	36.7	48.2	42.6	10.9	17	68
ASP430F-N02-09S	5/16 "	NPT 1/4	NPT 1/8	11/16 "	1/2 "	15.2	18.5	15	18	46.4	28.2	41.7	36.7	48.2	42.6	10.9	18.7	68
ASP530F-N03-09S	5/16 "	NPT 3/8	NPT 1/8	19	1/2 "	15.2	23	19.8	20.3	51.3	28.2	46.9	41.9	55.1	50.3	14.4	18.7	107
ASP530F-N03-11S	3/8 "	NPT 3/8	NPT 1/8	19	1/2 "	18.5	23	19.8	23.1	54.1	32.6	46.9	41.9	55.1	50.3	14.4	20.8	116
ASP630F-N04-11S	3/8 "	NPT 1/2	NPT 1/4	15/16 "	11/16 "	18.5	28.6	26.5	25.9	64.2	32.6	64.8	57.3	69.4	61.8	18.3	20.8	220
ASP630F-N04-13S	1/2 "	NPT 1/2	NPT 1/4	15/16 "	11/16 "	21.7	28.6	26.5	26.5	66.3	34.7	64.8	57.3	69.4	61.8	18.3	21.8	230

*1: Reference dimensions.
*2: Reference dimensions of NPT thread after installation.

Needle Valve: Flow Rate Characteristics

ASP330F Needle Valve: Flow Rate Characteristics

ASP430F Needle Valve: Flow Rate Characteristics

ASP530F Needle Valve: Flow Rate Characteristics

ASP630F Needle Valve: Flow Rate Characteristics

*The flow rate characteristics are representative values.

Precautions

*This product cannot be used for accurate and precise intermediate stopping of the actuator. Due to the compressibility of air as a fluid, the actuator will continue to move until it reaches a position of pressure balance, even though the pilot check valve closes with an intermediate stop signal.
*This product cannot be used to hold a stop position for an extended period of time. Pilot check valves and actuators are not guaranteed for zero air leakage. Therefore, it is sometimes not possible to hold a stop position for an extended period of time. In the event that holding for an extended time is necessary, a mechanical means for holding should be devised.
*Consider the release of residual pressure. Actuators may move suddenly due to residual pressure, which can be dangerous during maintenance procedures.
*When used in a balance control circuit, there are instances in which the check valve cannot release, even if the pilot pressure is 50% of the operating pressure. In these cases, the pilot pressure should be the same as the operating pressure.
*For reference, SMC has conducted endurance tests in which ON, OFF operation of the check valve was performed at the maximum operating pressure, with a confirmed endurance of 10 million operations. Sine the tests were performed under limited conditions, use caution in evaluating the results.
*The check valve has a construction in which it is closed by the differential pressure generated when the inlet pressure (IN side) or outlet pressure (OUT side) solenoid valve is switched. Be aware that the check valve does not close completely and the outlet pressure (OUT side) may drop when the inlet pressure (IN side) drops gently and the differential pressure becomes smaller than the minimum operating pressure or cracking pressure.
*When free flow is selected for the ASP, chattering may occur if it is operated under conditions where there is low differential pressure on either side of the ASP. Chattering may be reduced by increasing the diameter of the piping or selecting an ASP with a smaller body size; however, if this is not effective, we recommend using a perfect spacer in place of the ASP.
*See the manufacturer's catalog for product information other than the above.

: 30; 45; 60

Part Number
ASP430F-02-06S-J

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Lock Nut Option	Flow Rate (l/min)	Types of Screw Cylinder Side	Types of Screw Tube Side	Applicable Tube O.D. mm (mm)	Applicable Tube O.D. inch size (inch)	Body Size	Pipe Connection Bore Dia. Cylinder Side	Pipe Connection Bore Dia. Electromagnetic Valve Side	Made-to-order specifications
	MYR 235.40	1 Piece(s)		10 Day(s) or more	Round Shape Lock Nut	330	R	Rc	6	-	1/4 standard	46026	46030	None

Basic Information

Control Method	Meter Out / In	Format	Dual	Type	Speed Controller
Joint Type	Male thread + One-Touch Couplings	Material	PBT	Knob Type	Resin
Environment, Applications	Standard	Thread Material	Stainless Steel	Ambient Temperature and Working Fluid Temperature(°C)	-5::60
Operating Pressure Range(MPa)	0.1::1

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Applicable Tube O.D. inch size(inch)
- 46024
- 46026
- 46089
- 46158
Clear
type
- ASP
- ASP430F
- ASP630F
Clear
Lock Nut Option
- Round Shape Lock Nut
- Hexagon Shape Lock Nut
Clear
Types of Screw Cylinder Side
- NPT
- R
Clear
Types of Screw Tube Side
- G
- M
- NPT
- Rc
- UNF
Clear
Applicable Tube O.D. mm(mm)
- 6
- 8
- 10
- 12
Clear
Body Size
1/2 Standard

1/2 standard

1/4 Standard

1/4 standard

1/8 Standard

1/8 standard

3/8 Standard

3/8 standard
Clear
Pipe Connection Bore Dia. Cylinder Side
- 46024
- 46026
- 46030
- 46089
Clear
Pipe Connection Bore Dia. Electromagnetic Valve Side
- 5 × 0.8
- 11963
- 46026
- 46030
Clear
Made-to-order specifications
- Lubricant: Petroleum jelly
- Lubricant: Vaseline
- None
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

5 Day(s) or Less

9 Day(s) or Less

10 Day(s) or Less

11 Day(s) or Less

13 Day(s) or Less

21 Day(s) or Less

23 Day(s) or Less

43 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Speed Controller With Pilot Check Valve, ASP Series (ASP430F-02-06S-J)

(i)Caution

Speed Controller With Pilot Check Valve ASP Series Specifications

Dimensional Drawing of This Product (Metric Size)

Dimensional Drawing of This Product (Inch Size)

Needle Valve: Flow Rate Characteristics

Precautions

Basic Information

Configure

Specification/Dimensions

Applicable Tube O.D. inch size(inch)

type

Lock Nut Option

Types of Screw Cylinder Side

Types of Screw Tube Side

Applicable Tube O.D. mm(mm)

Body Size

Pipe Connection Bore Dia. Cylinder Side

Pipe Connection Bore Dia. Electromagnetic Valve Side

Made-to-order specifications

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm