(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Compact Cylinder, Standard Type, Double Acting, Single Rod CQ2 Series
A space-saving cylinder with a short overall length design.
[Features]
· Helps to make various jigs and equipment more compact.
· A round slot for mounting small auto switches is provided on 4 surfaces (ø12 to ø25 [12‑ to 25‑mm bore size]: Mountable on 2 surfaces).
(i)Caution
- See catalog for specification details.
- See the manufacturer's catalog for details about auto switches.
- A round slot for mounting small auto switches is
provided on 2 surfaces for ø12 to ø25,
and on 4 surfaces for ø32 to ø100
models. - Product pictures are representations.
Part Number
Configured Part Number is shown.
Compact Cylinder, Standard Type, Double Acting, Single Rod Features
Part Numbers Are Set for Products With Rod-End Brackets and Mounting Bolts
Ordering example of cylinder assembly
Cylinder model: CDQ2B32-30DMZ-LW-M9BW
- Mounting bracket / B: Through-hole (standard)
- Mounting bolt / L: Yes
- Rod-end bracket / W: Double knuckle joint
- Auto switch D-M9BW: 2 pcs.
Added Pivot Brackets for Double Clevis
Double clevis pivot bracket explanation drawing
- Rotating angle: Maximum 100° (For ø12, ø16 [12‑mm, 16-mm bore])
- Time to design rotating bracket saved.
- Improved mounting freedom.
- Can be mounted to an installed double clevis cylinder.
- Applicable cylinders: CQ2 (bore size ø12 to 100 [12‑ to 100‑mm bore], mounting bracket, applicable only to double clevis).
Specifications
Compact Cylinder, Standard Type: Double Acting, Single Rod CQ2 Series picture
Symbol
Without cushion
Pneumatic type specifications
| Tube Internal Diameter (mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating method | Double acting, single rod | ||||||||||
| Applicable fluids | Air | ||||||||||
| Proof pressure | 1.5 MPa | ||||||||||
| Maximum operating pressure | 1.0 MPa | ||||||||||
| Minimum operating pressure | 0.07 MPa | 0.05 MPa | |||||||||
| Ambient temperature and working fluid temperature | Without auto switch: -10°C to 70°C (No freezing) With auto switch: -10°C to 60°C (No freezing) | ||||||||||
| Lubrication | Not required (non-lube) | ||||||||||
| Operating piston speed | 50 to 500 mm/s | ||||||||||
| Allowable kinetic energy J | Standard type | 0.022 | 0.038 | 0.055 | 0.09 | 0.15 | 0.26 | 0.46 | 0.77 | 1.36 | 2.27 |
| With rubber bumper | 0.043 | 0.075 | 0.11 | 0.18 | 0.29 | 0.52 | 0.91 | 1.54 | 2.71 | 4.54 | |
| Stroke length tolerance | 0 to +1.0 mmNote) | ||||||||||
Note) Stroke length tolerance does not include the amount of bumper change.
Air-hydro type specifications
| Tube Internal Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|
| Operating method | Double acting, single rod | |||||||
| Applicable fluids | Turbine oilNote) | |||||||
| Proof pressure | 1.5 MPa | |||||||
| Maximum operating pressure | 1.0 MPa | |||||||
| Minimum operating pressure | 0.18 MPa | 0.1 MPa | ||||||
| Ambient temperature and working fluid temperature | 5 to 60°C | |||||||
| Operating piston speed | 5 to 50 mm/s | |||||||
| Cushioning | None | |||||||
| Stroke length tolerance | 0 to +1.0 mm | |||||||
Note) Use petroleum based turbine oil for the hydraulic fluid. The use of incombustible fluid may result in problems.
ISO VG32 has an operating temperature range of 15 to 35°C. When operating at a temperature range above that of ISO VG32, use ISO VG46 (25 to 45°C).
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Main Body Shape | Additional Function | Environment, Applications | Operating Temperature (°C) | Operating Pressure (MPa) | Cushion | Specifications | Stroke Type | Support bracket | Port thread type | Body Options | Auto Switches | Lead Wire | The number of the switches | Rod Tip Metal Fitting | Custom-made Specifications | Type | Made-to-Order (hose nipple type) | Auto switch mounting slot | Mounting bolt | Manual release method | Made-to-order specification (trunnion bracket mounting location) | Option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 157.85 | 1 Piece(s) | 3 Day(s) | 12 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 182.62 | 1 Piece(s) | 14 Day(s) or more | 12 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Male rod end | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 120.75 | 1 Piece(s) | 43 Day(s) | 12 | 5 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 176.40 | 1 Piece(s) | 3 Day(s) | 12 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 217.55 | 1 Piece(s) | 14 Day(s) or more | 12 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 187.47 | 1 Piece(s) | 14 Day(s) or more | 12 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Male rod end | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 163.67 | 1 Piece(s) | 9 Day(s) or more | 12 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 269.03 | 1 Piece(s) | 14 Day(s) or more | 12 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 256.12 | 1 Piece(s) | 14 Day(s) or more | 12 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 173.37 | 1 Piece(s) | 3 Day(s) | 12 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 167.18 | 1 Piece(s) | 3 Day(s) | 12 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 305.49 | 1 Piece(s) | 14 Day(s) or more | 12 | 20 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 292.64 | 1 Piece(s) | 27 Day(s) or more | 12 | 20 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 279.67 | 1 Piece(s) | 9 Day(s) or more | 12 | 20 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 266.87 | 1 Piece(s) | 9 Day(s) or more | 12 | 20 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 313.31 | 1 Piece(s) | 14 Day(s) or more | 12 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 300.34 | 1 Piece(s) | 14 Day(s) or more | 12 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 285.16 | 1 Piece(s) | 14 Day(s) or more | 12 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Male rod end | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 261.38 | 1 Piece(s) | 14 Day(s) or more | 12 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Standard (rod-end female thread) | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 321.06 | 1 Piece(s) | 14 Day(s) or more | 12 | 30 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 250.48 | 1 Piece(s) | 9 Day(s) or more | 12 | 30 | [Block Shape] Block shape | Standard | Standard | -10～60 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | None | Yes | None | - | Standard part (No option) | - | - | ||
MYR 267.50 | 1 Piece(s) | 14 Day(s) or more | 12 | 30 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Standard (rod-end female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 222.42 | 1 Piece(s) | 14 Day(s) or more | 16 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 162.05 | 1 Piece(s) | 3 Day(s) | 16 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 191.00 | 1 Piece(s) | 14 Day(s) or more | 16 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Male rod end | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 159.86 | 1 Piece(s) | 9 Day(s) or more | 16 | 5 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 239.27 | 1 Piece(s) | 14 Day(s) or more | 16 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | With rubber cushion and Rod-end female thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 232.84 | 1 Piece(s) | 14 Day(s) or more | 16 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 197.91 | 1 Piece(s) | 14 Day(s) or more | 16 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 149.57 | 1 Piece(s) | 43 Day(s) | 16 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 269.03 | 1 Piece(s) | 14 Day(s) or more | 16 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 199.50 | 1 Piece(s) | 3 Day(s) | 16 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 174.53 | 1 Piece(s) | 3 Day(s) | 16 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | None | Yes | None | - | Standard part (No option) | - | - | ||
MYR 215.72 | 1 Piece(s) | 14 Day(s) or more | 16 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 303.68 | 1 Piece(s) | 14 Day(s) or more | 16 | 20 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | With rubber cushion and Rod-end female thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 297.51 | 1 Piece(s) | 14 Day(s) or more | 16 | 20 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 205.68 | 1 Piece(s) | 3 Day(s) | 16 | 20 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 272.65 | 1 Piece(s) | 14 Day(s) or more | 16 | 20 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | None | Yes | None | - | Standard part (No option) | - | - | ||
MYR 318.23 | 1 Piece(s) | 14 Day(s) or more | 16 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 302.92 | 1 Piece(s) | 14 Day(s) or more | 16 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 271.71 | 1 Piece(s) | 14 Day(s) or more | 16 | 25 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 240.12 | 1 Piece(s) | 9 Day(s) or more | 16 | 25 | [Block Shape] Plate Cylinder | Standard | Standard | - | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Standard (rod-end female thread) | None | - | - | Without bracket | - | Pneumatic type | - | Yes | None | - | - | - | - | ||
MYR 321.06 | 1 Piece(s) | 14 Day(s) or more | 16 | 30 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 308.10 | 1 Piece(s) | 14 Day(s) or more | 16 | 30 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 267.50 | 1 Piece(s) | 14 Day(s) or more | 16 | 30 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.07～1 | - | Built-in magnet | - | Tap on both ends | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 258.66 | 1 Piece(s) | 14 Day(s) or more | 20 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 245.75 | 1 Piece(s) | 14 Day(s) or more | 20 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 217.27 | 1 Piece(s) | 14 Day(s) or more | 20 | 5 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Male rod end | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 214.55 | 1 Piece(s) | 14 Day(s) or more | 20 | 5 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 282.45 | 1 Piece(s) | 14 Day(s) or more | 20 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
- | 1 Piece(s) | Quote | 20 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M screw | With rubber bumper / Rod-end male thread | A72 | 3 | 2 | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 256.40 | 1 Piece(s) | 14 Day(s) or more | 20 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 242.47 | 1 Piece(s) | 14 Day(s) or more | 20 | 10 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M screw | Rod tip male screw | - | - | - | Without bracket | None | Pneumatic type | None | Yes | None | - | Standard part (No option) | - | - | ||
MYR 171.38 | 1 Piece(s) | 3 Day(s) | 20 | 10 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | Standard (rod-end female thread) | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 289.69 | 1 Piece(s) | 14 Day(s) or more | 20 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | None | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 276.84 | 1 Piece(s) | 14 Day(s) or more | 20 | 15 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 248.97 | 1 Piece(s) | 14 Day(s) or more | 20 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M screw | Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | Standard part (No option) | - | - | ||
MYR 158.47 | 1 Piece(s) | 21 Day(s) | 20 | 15 | [Block Shape] Block shape | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M screw | Standard (rod tip female thread) | - | - | - | Without bracket | None | Pneumatic type | None | Yes | None | - | Standard part (No option) | - | - | ||
MYR 310.70 | 1 Piece(s) | 14 Day(s) or more | 20 | 20 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper / Rod-end male thread | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - | ||
MYR 312.29 | 1 Piece(s) | 14 Day(s) or more | 20 | 20 | [Block Shape] Plate Cylinder | Standard | Standard | -10～70 | 0.05～1 | - | Built-in magnet | - | Both ends tapped | M Screw | With rubber bumper | - | - | - | Without bracket | None | Pneumatic type | - | Yes | None | - | - | Standard product (No options) | - |
Loading...
Basic Information
| Rod Operation Method | Single Rods | Cylinder Operation Method | Double Acting |
|---|
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Additional Function
- Standard
- With Intermediate Stop Function
-
Environment, Applications
- Standard
- Low Speed
-
Cushion
-
Specifications
- Built-in magnet
- Without Built-in magnet
- Without bracket
- Without built-in magnet
-
Stroke Type
- Double tap
-
Support bracket
-
Port thread type
- Built-in one-touch fittings type
- M Screw
- M screw
- Rc
- Rod tip male screw
- Standard (Rod tip male screw)
-
Body Options
- Head side with spigot
- Male rod end
- Rod-end male thread
- Rod tip female screw
- Rod tip male screw
- Standard (Rod-end female thread)
- Standard (Rod tip male screw)
- Standard (rod-end female thread)
- Standard (rod tip female thread)
- With rubber bumper
- With rubber bumper / Rod-end male thread
- With rubber cushion
- With rubber cushion and Rod-end female thread
- With rubber cushion and Rod-end male thread
- With rubber cushion and Rod tip male screw
- With rubber cushion, Rod tip male screw
-
Auto Switches
-
Lead Wire
- 3
-
The number of the switches
- 2
-
Rod Tip Metal Fitting
- Without bracket
- Without metal fittings
-
Custom-made Specifications
- Heat-resistant cylinder (-10 to 150°C)
- ERROR:#N/A
- Fluoroelastomer seals
- None
-
Type
- Air hydro type
- Pneumatic type
-
Made-to-Order (hose nipple type)
- None
-
Auto switch mounting slot
- ERROR:#N/A
- None
- Yes
-
Mounting bolt
- None
- Yes
-
Manual release method
- None
-
Made-to-order specification (trunnion bracket mounting location)
- Option
- Optionable
- Standard (No Option)
- Standard (No option)
- Standard part (No option)
-
Option
- Standard product (No options)
-
- Standard part (No option)
-
type
- CDQ2
- CQ2
-
Main Body Shape
- Block Shape
- Guided
- Block Shape
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 3 Day(s) or Less
- 9 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 21 Day(s) or Less
- 22 Day(s) or Less
- 27 Day(s) or Less
- 28 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compact Cylinder, Large Bore Size, Double Acting, Single Rod CQ2 Series
- Compact Cylinder, Guide-Rod Type CQM Series
- Compact Cylinder, Anti-Lateral Load Type CQS□S Series
- MLU Series Plate Cylinder With Lock
- Thin Cylinder With Lubrication Retainer (Lube-Retainer), Standard Type, Double Acting, Single Rod, CQ2 Series
- Compact Cylinder, ADNGF Series
- Compact End Lock Cylinder, Compatible With Rechargeable Batteries, 25A-CBQ2 Series
- Slimline Cylinder, DZF Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy