[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Compact Low-Friction Cylinder MQQ Series (Part Numbers)

A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
[Features]
· Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
· Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
· Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
· Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
· No change to sliding resistance, even after extended periods of non-use.

(i)Caution

■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Refer to the manufacturer's catalog for specification and material details.
Product images may be representative images. Refer to the manufacturer's catalog for shape details.
CAD data is not supported for some model numbers.

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Compact Low-Friction Cylinder MQQ Series Specifications

Compact Low-Friction Cylinder MQQ Series external appearance

Symbol: Double acting, single rod

Specifications

Standard Type: MQQT

Tube Inner Diameter (mm)		10	16	25	40
Seal Construction		Metal seal
Action		Double acting, single rod
Fluid		Air
Proof Pressure		1.05 MPa
Maximum operating pressure		0.5 MPa
Minimum operating pressure		0.005 MPa
Ambient and Fluid Temperature		-10 to 80°C
Cushioning		Rubber bumper (equipped as standard)
Lubrication		Not required (non-lubricated)
Rod-end thread		Female thread
Stroke Length Tolerance		+1.0 0
Piston Speed		0.3 to 300 mm/s
Total Leakage Rate	Supply Pressure 0.1 MPa	150 cm³/min	200 cm³/min	300 cm³/min	400 cm³/min
	Supply pressure 0.3 MPa	800 cm³/min	1,000 cm³/min	1,200 cm³/min	1,600 cm³/min
	Supply pressure 0.5 MPa	1,500 cm³/min	2,000 cm³/min	3,000 cm³/min	4,000 cm³/min

Lateral-Load-Resistant Type: MQQL

Tube Inner Diameter (mm)		10	16	25	40
Seal Construction		Metal seal
Action		Double acting, single rod
Fluid		Air
Proof Pressure		1.05 MPa
Maximum operating pressure		0.7 MPa
Minimum Operating Pressure^*1		0.005 MPa
Ambient and Fluid Temperature		-10 to 80°C
Cushioning		Rubber bumper (Standard)
Lubrication^*2		Not required (non-lubricated)
Rod-end thread		Female thread
Stroke Length Tolerance		+1.0 0
Operating Piston Speed^*3		0.5 to 300 mm/s
Total Leakage Rate^*4	Supply Pressure 0.1 MPa	150 cm³/min	200 cm³/min	300 cm³/min	400 cm³/min
	Supply pressure 0.3 MPa	800 cm³/min	1,000 cm³/min	1,200 cm³/min	1,600 cm³/min
	Supply pressure 0.5 MPa	1,500 cm³/min	2,000 cm³/min	3,000 cm³/min	4,000 cm³/min

*1: Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the weight of its moving parts and the pressure will likely increase by approximately 0.003 to 0.005 MPa due to an offset load from the weight of the rod.
*2: See p. 339 in the SMC catalog regarding information on lubrication. This product uses turbine oil as an initial lubricant. Lubricant may seep out of the rod or the piping port.
*3: Control low speed actuation with differential pressure, speed controllers, etc. (Refer to the recommended circuit example on p. 319 of the SMC catalog for details.)
*4: The values are only for reference and are not guaranteed.

Diagram

Standard type / MQQT diagram

Lateral-load-resistant type / MQQL (built-in ball bushing type) diagram

Component Parts

Number	Part Name	Material	Notes
1	Rod	Carbon steel	Hard chrome plated
2	Piston	Special stainless steel	-
3	Liner	Special stainless steel	-
4	Sleeve	Special stainless steel	-
5	Sleeve Retainer	Aluminum alloy	-
6	Plate	Aluminum alloy	Hard anodized aluminum
7	Guide	Fluororesin	-
8	Cylinder Tubing	Aluminum alloy	Hard anodized aluminum
9	Bumper A	Polyurethane	-
10	Bumper B	Polyurethane	-
11	Bushing	Aluminum alloy	-
12	Bottom Plate	Aluminum alloy	Hard anodized aluminum
13	O-ring	NBR	-
14	Retaining Ring	Carbon tool steel	Phosphate conversion coating
15	Bolt	Carbon tool steel	Chromate
16	Ball Bushing	-	-

Mounting method

a) Mounting type A (when using the mounting plate threads)

*Always use a flat washer for mounting type A.

b) Mounting type B (when using the cylinder tube threads)

Applicable Mounting Bolt Dimensions Table

Model		Mounting Type A			Mounting Type B
Model		Mounting Bolt Size	C (mm)	D: Thread Length (mm)	Mounting Bolt Size	E (mm)
Standard Type MQQT	MQQTB10-□D	M3 × 0.5	7	35 + stroke	M4 × 0.7	8 to 11
	MQQTB16-□D	M5 × 0.8	7	35 + stroke	M6 × 1	13 to 17
	MQQTB20-□D		8.5	40 + stroke
	MQQTB25-□D		9	45 + stroke
	MQQTB30-□D		7.5	50 + stroke
	MQQTB40-□D	M6 × 1	6	50 + stroke	M8 × 1.25	16 to 22
Lateral-Load-Resistant Type MQQL (Built-In Ball Bushing Type)	MQQLB10-□D	M3 × 0.5	7	65 + stroke	M4 × 0.7	8 to 11
	MQQLB16-□D	M5 × 0.8	5.5	70 + stroke	M6 × 1	13 to 17
	MQQLB20-□D		8	80 + stroke
	MQQLB25-□D		6.5	85 + stroke
	MQQLB30-□D		7	105 + stroke
	MQQLB40-□D	M6 × 1	7	105 + stroke	M8 × 1.25	16 to 22

□: stroke

*See the SMC catalog for details of other specifications, structures, dimensional drawings, etc.

: 30; 60; 90

Part Number
MQQLL30-50DM
MQQLL30-75DM
MQQLL30-100D
MQQLL30-100DM
MQQLL40-30D
MQQLL40-40D
MQQLL40-40DM
MQQLL40-50D
MQQLL40-50DM
MQQLL40-75DM
MQQLL40-100D
MQQLL40-100DM
MQQLL40TF-30D
MQQLL40TF-50DM
MQQLL40TF-100DM
MQQLL40TN-30D
MQQLL40TN-40D
MQQTB10-2D
MQQTB10-3D
MQQTB10-3DM
MQQTB10-5D
MQQTB10-5DM
MQQTB10-6D
MQQTB10-10D
MQQTB10-10DM
MQQTB10-12D
MQQTB10-14D
MQQTB10-15D
MQQTB10-15DM
MQQTB10-16D
MQQTB10-16DM
MQQTB10-18D
MQQTB10-20D
MQQTB10-20DM
MQQTB10-22D
MQQTB10-24D
MQQTB10-25D
MQQTB10-25DM
MQQTB10-30D
MQQTB10-30DM
MQQTB10-35D
MQQTB10-35DM
MQQTB10-40D
MQQTB10-40DM
MQQTB16-1D
MQQTB16-1DM
MQQTB16-2D
MQQTB16-2DM
MQQTB16-3D
MQQTB16-4D
MQQTB16-5D
MQQTB16-5DM
MQQTB16-6D
MQQTB16-7D
MQQTB16-8D
MQQTB16-9D
MQQTB16-10D
MQQTB16-10DM
MQQTB16-11D
MQQTB16-12D
MQQTB16-12DM
MQQTB16-13D
MQQTB16-14D
MQQTB16-15D
MQQTB16-15DM
MQQTB16-16D
MQQTB16-17D
MQQTB16-18D
MQQTB16-19D
MQQTB16-20D
MQQTB16-20DM
MQQTB16-21D
MQQTB16-22D
MQQTB16-25D
MQQTB16-25DM
MQQTB16-30D
MQQTB16-30DM
MQQTB16-32D
MQQTB16-35D
MQQTB16-35DM
MQQTB16-40D
MQQTB16-40DM
MQQTB16-45D
MQQTB16-50D
MQQTB16-50DM
MQQTB16-55D
MQQTB16-60D
MQQTB16-60DM
MQQTB20-1D
MQQTB20-1DM

Standard Unit Price	Minimum order quantity	Days to Ship	Cylinder (Tube) Inner Diameter (Ø)	Stroke (mm)	Environment, Applications	Operating Temperature (°C)	End Locking	Valves	Operating Pressure (MPa)	Cushion	Operating Pressure (MPa)	Support bracket	Port thread type	Rod Tip Shape	Tube Material	Type	Sealing materials
MYR 1,688.17	1 Piece(s)	27 Day(s) or more	30	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,856.72	1 Piece(s)	27 Day(s) or more	30	75	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,926.45	1 Piece(s)	27 Day(s) or more	30	100	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,987.68	1 Piece(s)	27 Day(s) or more	30	100	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,862.74	1 Piece(s)	27 Day(s) or more	40	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,984.72	1 Piece(s)	27 Day(s) or more	40	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,072.72	1 Piece(s)	27 Day(s) or more	40	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,050.80	1 Piece(s)	27 Day(s) or more	40	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,167.97	1 Piece(s)	27 Day(s) or more	40	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,407.27	1 Piece(s)	27 Day(s) or more	40	75	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,485.62	1 Piece(s)	27 Day(s) or more	40	100	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,630.90	1 Piece(s)	27 Day(s) or more	40	100	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	Rc	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,890.16	1 Piece(s)	27 Day(s) or more	40	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	G	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,167.97	1 Piece(s)	27 Day(s) or more	40	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	G	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 2,646.56	1 Piece(s)	27 Day(s) or more	40	100	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	G	Male thread	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,890.16	1 Piece(s)	27 Day(s) or more	40	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	NPT	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 1,984.72	1 Piece(s)	27 Day(s) or more	40	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.7	Foot type	NPT	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Lateral load resisting type (Built-in ball bushing)	Metal seal
MYR 519.80	1 Piece(s)	27 Day(s) or more	10	2	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 527.12	1 Piece(s)	27 Day(s) or more	10	3	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 595.53	1 Piece(s)	27 Day(s) or more	10	3	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 527.12	1 Piece(s)	27 Day(s) or more	10	5	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 595.53	1 Piece(s)	27 Day(s) or more	10	5	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 527.12	1 Piece(s)	27 Day(s) or more	10	6	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 488.58	1 Piece(s)	14 Day(s) or more	10	10	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 555.22	1 Piece(s)	14 Day(s) or more	10	10	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 542.98	1 Piece(s)	27 Day(s) or more	10	12	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 542.98	1 Piece(s)	27 Day(s) or more	10	14	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 542.98	1 Piece(s)	27 Day(s) or more	10	15	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 611.49	1 Piece(s)	27 Day(s) or more	10	15	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 542.98	1 Piece(s)	27 Day(s) or more	10	16	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 595.71	1 Piece(s)	27 Day(s) or more	10	16	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 542.98	1 Piece(s)	27 Day(s) or more	10	18	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 505.25	1 Piece(s)	14 Day(s) or more	10	20	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 584.99	1 Piece(s)	27 Day(s) or more	10	20	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 559.00	1 Piece(s)	27 Day(s) or more	10	22	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 559.00	1 Piece(s)	27 Day(s) or more	10	24	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 559.00	1 Piece(s)	27 Day(s) or more	10	25	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 627.35	1 Piece(s)	27 Day(s) or more	10	25	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 532.39	1 Piece(s)	14 Day(s) or more	10	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 600.91	1 Piece(s)	27 Day(s) or more	10	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 574.69	1 Piece(s)	27 Day(s) or more	10	35	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 628.96	1 Piece(s)	27 Day(s) or more	10	35	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 538.50	1 Piece(s)	14 Day(s) or more	10	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 630.75	1 Piece(s)	14 Day(s) or more	10	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	1	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 645.92	1 Piece(s)	27 Day(s) or more	16	1	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	2	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 629.03	1 Piece(s)	27 Day(s) or more	16	2	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	3	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	4	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	5	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 645.92	1 Piece(s)	27 Day(s) or more	16	5	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	6	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	7	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	8	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 577.41	1 Piece(s)	27 Day(s) or more	16	9	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 550.96	1 Piece(s)	14 Day(s) or more	16	10	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 619.37	1 Piece(s)	27 Day(s) or more	16	10	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	11	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	12	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 667.50	1 Piece(s)	27 Day(s) or more	16	12	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	13	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	14	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	15	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 650.57	1 Piece(s)	27 Day(s) or more	16	15	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	16	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	17	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	18	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 598.19	1 Piece(s)	27 Day(s) or more	16	19	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 559.26	1 Piece(s)	14 Day(s) or more	16	20	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 640.88	1 Piece(s)	27 Day(s) or more	16	20	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 619.76	1 Piece(s)	27 Day(s) or more	16	21	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 619.76	1 Piece(s)	27 Day(s) or more	16	22	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 619.76	1 Piece(s)	27 Day(s) or more	16	25	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 688.22	1 Piece(s)	27 Day(s) or more	16	25	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 593.32	1 Piece(s)	24 Day(s) or more	16	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 661.78	1 Piece(s)	27 Day(s) or more	16	30	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 640.54	1 Piece(s)	27 Day(s) or more	16	32	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 640.54	1 Piece(s)	27 Day(s) or more	16	35	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 709.80	1 Piece(s)	27 Day(s) or more	16	35	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 614.10	1 Piece(s)	14 Day(s) or more	16	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 690.21	1 Piece(s)	14 Day(s) or more	16	40	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 662.12	1 Piece(s)	27 Day(s) or more	16	45	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 642.95	1 Piece(s)	14 Day(s) or more	16	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 704.13	1 Piece(s)	27 Day(s) or more	16	50	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 682.90	1 Piece(s)	27 Day(s) or more	16	55	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 643.92	1 Piece(s)	14 Day(s) or more	16	60	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 725.65	1 Piece(s)	27 Day(s) or more	16	60	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 573.16	1 Piece(s)	27 Day(s) or more	20	1	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Female thread (standard)	Aluminum alloy / hard anodized aluminum	Standard type	-
MYR 640.49	1 Piece(s)	27 Day(s) or more	20	1	Standard / Low Friction (Internal Resistance) / Low Speed	-	-	-	-	Rubber bumper (Standard)	0.005 to 0.5	Through-hole / both sides tapped common (standard)	M Screw	Male thread	Aluminum alloy / hard anodized aluminum	Standard type	-

Basic Information

Rod Operation Method	Single Rods	Main Body Shape	Plate Cylinder	Cylinder Operation Method	Double Acting
Additional Function	Standard	Specification of cylinder	Compact low friction cylinder

Configure

830 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Cylinder (Tube) Inner Diameter(Ø)
10

16

20

25

30

40
Clear
Stroke(mm)
1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

24

25

26

29

30

31

32

35

36

38

40

41

45

50

55

58

60

65

70

75

80

81

85

90

91

100
Clear
Environment, Applications
- Standard
- Low Friction (Internal Resistance)
- Low Speed
Clear
End Locking
- No
Clear
Valves
- No
Clear
Cushion
Rubber bumper (Standard)

Rubber bumper (standard)
Clear
Operating Pressure(MPa)
0.005 to 0.5

0.005 to 0.7
Clear
Support bracket
Double clevis type

Foot type

Head-end flange

Rod-end flange type

Through-hole / both sides tapped common (standard)
Clear
Port thread type
- G
- M Screw
- NPT
- Rc
Clear
Rod Tip Shape
- Female thread (standard)
- Male thread
Clear
Tube Material
- Aluminum alloy / Hard anodized aluminum
- Aluminum alloy / hard anodized aluminum
Clear
Type
- Lateral load resisting type (Built-in ball bushing)
- Lateral load resisting type (built-in ball bushing)
- Standard type
Clear
Sealing materials
- Metal seal
Clear
type
- MQQL
- MQQT
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

9 Day(s) or Less

14 Day(s) or Less

21 Day(s) or Less

24 Day(s) or Less

27 Day(s) or Less

43 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Compact Low-Friction Cylinder MQQ Series (Part Numbers)

(i)Caution

Compact Low-Friction Cylinder MQQ Series Specifications

Specifications

Standard Type: MQQT

Lateral-Load-Resistant Type: MQQL

Diagram

Component Parts

Mounting method

Applicable Mounting Bolt Dimensions Table

Basic Information

Configure

Specification/Dimensions

Cylinder (Tube) Inner Diameter(Ø)

Stroke(mm)

Environment, Applications

End Locking

Valves

Cushion

Operating Pressure(MPa)

Support bracket

Port thread type

Rod Tip Shape

Tube Material

Type

Sealing materials

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm