(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Compact Low-Friction Cylinder MQQ Series (Part Numbers)
A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
[Features]
· Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
· Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
· Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
· Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
· No change to sliding resistance, even after extended periods of non-use.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Compact Low-Friction Cylinder MQQ Series Specifications
Compact Low-Friction Cylinder MQQ Series external appearance
Symbol: Double acting, single rod
Specifications
Standard Type: MQQT
| Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
|---|---|---|---|---|---|---|---|
| Seal Construction | Metal seal | ||||||
| Action | Double acting, single rod | ||||||
| Fluid | Air | ||||||
| Proof Pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.5 MPa | ||||||
| Minimum operating pressure | 0.005 MPa | ||||||
| Ambient and Fluid Temperature | -10 to 80°C | ||||||
| Cushioning | Rubber bumper (equipped as standard) | ||||||
| Lubrication | Not required (non-lubricated) | ||||||
| Rod-end thread | Female thread | ||||||
| Stroke Length Tolerance | +1.0 0 | ||||||
| Piston Speed | 0.3 to 300 mm/s | ||||||
| Total Leakage Rate | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min | |||
Lateral-Load-Resistant Type: MQQL
| Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
|---|---|---|---|---|---|---|---|
| Seal Construction | Metal seal | ||||||
| Action | Double acting, single rod | ||||||
| Fluid | Air | ||||||
| Proof Pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.7 MPa | ||||||
| Minimum Operating Pressure*1 | 0.005 MPa | ||||||
| Ambient and Fluid Temperature | -10 to 80°C | ||||||
| Cushioning | Rubber bumper (Standard) | ||||||
| Lubrication*2 | Not required (non-lubricated) | ||||||
| Rod-end thread | Female thread | ||||||
| Stroke Length Tolerance | +1.0 0 | ||||||
| Operating Piston Speed*3 | 0.5 to 300 mm/s | ||||||
| Total Leakage Rate*4 | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min | |||
*1: Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the weight of its moving parts and the pressure will likely increase by approximately 0.003 to 0.005 MPa due to an offset load from the weight of the rod.
*2: See p. 339 in the SMC catalog regarding information on lubrication. This product uses turbine oil as an initial lubricant. Lubricant may seep out of the rod or the piping port.
*3: Control low speed actuation with differential pressure, speed controllers, etc. (Refer to the recommended circuit example on p. 319 of the SMC catalog for details.)
*4: The values are only for reference and are not guaranteed.
Diagram
Standard type / MQQT diagram
Lateral-load-resistant type / MQQL (built-in ball bushing type) diagram
Component Parts
| Number | Part Name | Material | Notes |
|---|---|---|---|
| 1 | Rod | Carbon steel | Hard chrome plated |
| 2 | Piston | Special stainless steel | - |
| 3 | Liner | Special stainless steel | - |
| 4 | Sleeve | Special stainless steel | - |
| 5 | Sleeve Retainer | Aluminum alloy | - |
| 6 | Plate | Aluminum alloy | Hard anodized aluminum |
| 7 | Guide | Fluororesin | - |
| 8 | Cylinder Tubing | Aluminum alloy | Hard anodized aluminum |
| 9 | Bumper A | Polyurethane | - |
| 10 | Bumper B | Polyurethane | - |
| 11 | Bushing | Aluminum alloy | - |
| 12 | Bottom Plate | Aluminum alloy | Hard anodized aluminum |
| 13 | O-ring | NBR | - |
| 14 | Retaining Ring | Carbon tool steel | Phosphate conversion coating |
| 15 | Bolt | Carbon tool steel | Chromate |
| 16 | Ball Bushing | - | - |
Mounting method
a) Mounting type A (when using the mounting plate threads)
*Always use a flat washer for mounting type A.
b) Mounting type B (when using the cylinder tube threads)
Applicable Mounting Bolt Dimensions Table
| Model | Mounting Type A | Mounting Type B | ||||
|---|---|---|---|---|---|---|
| Mounting Bolt Size | C (mm) | D: Thread Length (mm) | Mounting Bolt Size | E (mm) | ||
| Standard Type MQQT | MQQTB10-□D | M3 × 0.5 | 7 | 35 + stroke | M4 × 0.7 | 8 to 11 |
| MQQTB16-□D | M5 × 0.8 | 7 | 35 + stroke | M6 × 1 | 13 to 17 | |
| MQQTB20-□D | 8.5 | 40 + stroke | ||||
| MQQTB25-□D | 9 | 45 + stroke | ||||
| MQQTB30-□D | 7.5 | 50 + stroke | ||||
| MQQTB40-□D | M6 × 1 | 6 | 50 + stroke | M8 × 1.25 | 16 to 22 | |
| Lateral-Load-Resistant Type MQQL (Built-In Ball Bushing Type) | MQQLB10-□D | M3 × 0.5 | 7 | 65 + stroke | M4 × 0.7 | 8 to 11 |
| MQQLB16-□D | M5 × 0.8 | 5.5 | 70 + stroke | M6 × 1 | 13 to 17 | |
| MQQLB20-□D | 8 | 80 + stroke | ||||
| MQQLB25-□D | 6.5 | 85 + stroke | ||||
| MQQLB30-□D | 7 | 105 + stroke | ||||
| MQQLB40-□D | M6 × 1 | 7 | 105 + stroke | M8 × 1.25 | 16 to 22 | |
□: stroke
*See the SMC catalog for details of other specifications, structures, dimensional drawings, etc.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Operating Temperature (°C) | End Locking | Valves | Operating Pressure (MPa) | Cushion | Operating Pressure (MPa) | Support bracket | Port thread type | Rod Tip Shape | Tube Material | Type | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,459.51 | 1 Piece(s) | 27 Day(s) or more | 30 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,347.34 | 1 Piece(s) | 27 Day(s) or more | 30 | 25 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,431.51 | 1 Piece(s) | 27 Day(s) or more | 30 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,522.68 | 1 Piece(s) | 27 Day(s) or more | 30 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,497.35 | 1 Piece(s) | 27 Day(s) or more | 30 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,577.77 | 1 Piece(s) | 27 Day(s) or more | 30 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,549.78 | 1 Piece(s) | 14 Day(s) or more | 30 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,564.50 | 1 Piece(s) | 27 Day(s) or more | 30 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,723.29 | 1 Piece(s) | 27 Day(s) or more | 30 | 55 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,809.95 | 1 Piece(s) | 27 Day(s) or more | 30 | 65 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,699.61 | 1 Piece(s) | 27 Day(s) or more | 30 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,720.67 | 1 Piece(s) | 27 Day(s) or more | 30 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,959.78 | 1 Piece(s) | 27 Day(s) or more | 30 | 91 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,849.39 | 1 Piece(s) | 27 Day(s) or more | 30 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,936.15 | 1 Piece(s) | 27 Day(s) or more | 30 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,371.26 | 1 Piece(s) | 27 Day(s) or more | 30 | 16 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,372.74 | 1 Piece(s) | 27 Day(s) or more | 30 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,434.68 | 1 Piece(s) | 27 Day(s) or more | 30 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,522.68 | 1 Piece(s) | 27 Day(s) or more | 30 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,583.15 | 1 Piece(s) | 27 Day(s) or more | 30 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,611.42 | 1 Piece(s) | 27 Day(s) or more | 30 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,705.83 | 1 Piece(s) | 27 Day(s) or more | 30 | 60 | Low Friction (Internal Resistance) / Low Speed | -10～80 | No | No | 0.005～0.7 | Rubber bumper (standard) | - | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / Hard anodized aluminum | Lateral load resisting type (built-in ball bushing) | Metal seal | ||
MYR 1,674.44 | 1 Piece(s) | 27 Day(s) or more | 30 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,824.27 | 1 Piece(s) | 27 Day(s) or more | 30 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,674.44 | 1 Piece(s) | 27 Day(s) or more | 30 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | NPT | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,717.09 | 1 Piece(s) | 27 Day(s) or more | 30 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | NPT | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,648.73 | 1 Piece(s) | 27 Day(s) or more | 40 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,637.22 | 1 Piece(s) | 14 Day(s) or more | 40 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,711.80 | 1 Piece(s) | 27 Day(s) or more | 40 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,713.88 | 1 Piece(s) | 27 Day(s) or more | 40 | 14 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,667.72 | 1 Piece(s) | 27 Day(s) or more | 40 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,731.83 | 1 Piece(s) | 27 Day(s) or more | 40 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,731.20 | 1 Piece(s) | 27 Day(s) or more | 40 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,668.06 | 1 Piece(s) | 27 Day(s) or more | 40 | 25 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,806.38 | 1 Piece(s) | 27 Day(s) or more | 40 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,731.54 | 1 Piece(s) | 27 Day(s) or more | 40 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,896.71 | 1 Piece(s) | 27 Day(s) or more | 40 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,826.61 | 1 Piece(s) | 27 Day(s) or more | 40 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,987.68 | 1 Piece(s) | 27 Day(s) or more | 40 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,074.43 | 1 Piece(s) | 27 Day(s) or more | 40 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,240.02 | 1 Piece(s) | 27 Day(s) or more | 40 | 58 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,256.63 | 1 Piece(s) | 27 Day(s) or more | 40 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,362.85 | 1 Piece(s) | 27 Day(s) or more | 40 | 65 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,252.46 | 1 Piece(s) | 27 Day(s) or more | 40 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,339.21 | 1 Piece(s) | 27 Day(s) or more | 40 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,481.12 | 1 Piece(s) | 14 Day(s) or more | 40 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,567.82 | 1 Piece(s) | 27 Day(s) or more | 40 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | Rc | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,731.83 | 1 Piece(s) | 27 Day(s) or more | 40 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,819.79 | 1 Piece(s) | 27 Day(s) or more | 40 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,847.78 | 1 Piece(s) | 27 Day(s) or more | 40 | 25 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,016.90 | 1 Piece(s) | 27 Day(s) or more | 40 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,104.90 | 1 Piece(s) | 27 Day(s) or more | 40 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,214.90 | 1 Piece(s) | 27 Day(s) or more | 40 | 70 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,256.06 | 1 Piece(s) | 27 Day(s) or more | 40 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,494.05 | 1 Piece(s) | 27 Day(s) or more | 40 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,583.54 | 1 Piece(s) | 27 Day(s) or more | 40 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | G | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,827.09 | 1 Piece(s) | 27 Day(s) or more | 40 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | NPT | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,917.41 | 1 Piece(s) | 27 Day(s) or more | 40 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | NPT | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 2,256.19 | 1 Piece(s) | 27 Day(s) or more | 40 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | NPT | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 735.90 | 1 Piece(s) | 27 Day(s) or more | 10 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 805.10 | 1 Piece(s) | 27 Day(s) or more | 10 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 751.70 | 1 Piece(s) | 27 Day(s) or more | 10 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 821.01 | 1 Piece(s) | 27 Day(s) or more | 10 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 836.81 | 1 Piece(s) | 27 Day(s) or more | 10 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 799.22 | 1 Piece(s) | 27 Day(s) or more | 10 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 852.72 | 1 Piece(s) | 27 Day(s) or more | 10 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 783.58 | 1 Piece(s) | 27 Day(s) or more | 16 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 852.72 | 1 Piece(s) | 27 Day(s) or more | 16 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 831.60 | 1 Piece(s) | 27 Day(s) or more | 16 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 900.06 | 1 Piece(s) | 27 Day(s) or more | 16 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 805.10 | 1 Piece(s) | 27 Day(s) or more | 16 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 873.50 | 1 Piece(s) | 27 Day(s) or more | 16 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 825.93 | 1 Piece(s) | 27 Day(s) or more | 16 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 895.13 | 1 Piece(s) | 27 Day(s) or more | 16 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 847.45 | 1 Piece(s) | 27 Day(s) or more | 16 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 915.91 | 1 Piece(s) | 27 Day(s) or more | 16 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 868.23 | 1 Piece(s) | 27 Day(s) or more | 16 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 937.49 | 1 Piece(s) | 27 Day(s) or more | 16 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 876.68 | 1 Piece(s) | 27 Day(s) or more | 16 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 964.76 | 1 Piece(s) | 27 Day(s) or more | 16 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 886.86 | 1 Piece(s) | 27 Day(s) or more | 20 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 844.85 | 1 Piece(s) | 27 Day(s) or more | 20 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 913.19 | 1 Piece(s) | 27 Day(s) or more | 20 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 868.74 | 1 Piece(s) | 27 Day(s) or more | 20 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 947.62 | 1 Piece(s) | 27 Day(s) or more | 20 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 913.59 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 982.16 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,012.20 | 1 Piece(s) | 27 Day(s) or more | 20 | 32 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 936.34 | 1 Piece(s) | 27 Day(s) or more | 20 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Female thread (standard) | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,016.48 | 1 Piece(s) | 27 Day(s) or more | 20 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Double clevis type | M Screw | Male thread | Aluminum alloy / hard anodized aluminum | Lateral load resisting type (Built-in ball bushing) | Metal seal |
Loading...
Basic Information
| Rod Operation Method | Single Rods | Main Body Shape | Plate Cylinder | Cylinder Operation Method | Double Acting |
|---|---|---|---|---|---|
| Additional Function | Standard | Specification of cylinder | Compact low friction cylinder |
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
End Locking
- No
-
Valves
- No
-
Cushion
-
Operating Pressure(MPa)
-
Support bracket
-
Port thread type
- G
- M Screw
- NPT
- Rc
-
Rod Tip Shape
- Female thread (standard)
- Male thread
-
Tube Material
- Aluminum alloy / Hard anodized aluminum
- Aluminum alloy / hard anodized aluminum
-
Type
- Lateral load resisting type (Built-in ball bushing)
- Lateral load resisting type (built-in ball bushing)
- Standard type
-
Sealing materials
- Metal seal
-
type
- MQQL
- MQQT
-
Environment, Applications
- Standard
- Low Friction (Internal Resistance)
- Low Speed
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 9 Day(s) or Less
- 14 Day(s) or Less
- 21 Day(s) or Less
- 24 Day(s) or Less
- 27 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Space Saving Type Cartridge Cylinder Series CAT
- Push-in joint ultra small size cylinder MKY series
- Precision Cylinder MTS Series
- Pin Cylinder, Single Acting, Spring Return CJP Series
- Free Mount Cylinder, Long Stroke Type, Non-Rotating Rod, Double Acting: Single Rod CUK Series
- High Power Cylinder, RHC Series
- High-Precision Stroke Reading Cylinder, Non-Rotating Piston Type, CEP1 Series
- Stroke Reading Cylinder With Brake, CE2 Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy