(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Lateral Load Resisting Low-Friction Cylinder MQM Series (Part Numbers)
An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
[Features]
· Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
· Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
· Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
· Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
· No increased sliding resistance after not operating for a long period of time.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance increased by built-in ball bushing.
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers
- Product pictures are representations.
Part Number
Configured Part Number is shown.
Lateral Load Resisting Low Friction Cylinder MQM Series Specifications
Lateral Load Resisting Low Friction Cylinder MQM Series external appearance
Symbol Double acting: single rod
Specifications
| Tube Internal Diameter (mm) | 6 | 10 | 16 | 20 | 25 | |
|---|---|---|---|---|---|---|
| Seal construction | Metal seal | |||||
| Operating method | Double acting, single rod | |||||
| Applicable fluids | Air | |||||
| Proof pressure | 1.05 MPa | |||||
| Maximum operating pressure | 0.7 MPa | |||||
| Minimum operating pressureNote 1) | Standard type | 0.02 MPa | 0.005 MPa | |||
| H (high speed / high frequency type) | - | 0.01 MPa | ||||
| Ambient temperature and working fluid temperature | -10 to 80°C | |||||
| Cushioning | Rubber bumper (Standard) | |||||
| LubricationNote 2) | Not required (non-lube) | |||||
| Stroke length tolerance | +1.0 0 | |||||
| Operating piston speed Note 3) | Standard type | 0.5 mm/s to 1,000 mm/s | ||||
| H (high speed / high frequency type) | - | 5 mm/s to 3,000 mm/s | ||||
| Total leakageNote 4) | Supply pressure 0.1 MPa | 150 cm3/min | 250 cm3/min | 300 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,500 cm3/min | 3,000 cm3/min | |||
Note 1) Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the mass of its moving parts and the pressure will likely increase by 0.003 to 0.005 MPa due to an offset load from the mass of the rod.
Note 2) Please refer to the manufacturer's catalog regarding lubrication. This product uses turbine oil (standard type) or lithium soap based grease (high speed / high frequency type) as an initial lubricant. Lubricant may seep out of the rod or the piping port.
Note 3) Control low speed actuation with differential pressure and a speed controller, etc. (Refer to the recommended circuit example in the manufacturer's catalog for details.)
Note 4) The values are only for reference and are not guaranteed.
Structural drawing
MQM Series structural drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Rod | Carbon steel | Hard chrome plated |
| 2 | Piston | Special stainless steel | - |
| 3 | Tube | Special stainless steel | - |
| 4 | Head cover | Aluminum Alloy | Hard Anodize |
| 5 | Rod Cover | Aluminum Alloy | Hard Anodize |
| 6 | Sleeve | Special stainless steel | - |
| 7 | Seat | NBR | - |
| 8 | Bumper A | Polyurethane | - |
| 9 | Bumper B | Polyurethane | - |
| 10 | Bumper C | Polyurethane | - |
| 11 | Nut | Aluminum Alloy | - |
| 12 | Ball bushing | - | - |
| 13 | O-ring | NBR | - |
| 14 | Retaining Ring | Carbon tool steel | Phosphate coated |
| 15 | Rod-end nut | Carbon steel | Chromate |
| 16 | Mounting nut | Brass / carbon steelNote) | - |
Note) Bore size: 6 mm, 10 mm, 16 mm is brass
Bore size: 20 mm, 25 mm is carbon steel
Outline dimensional drawing
Basic type: MQMLB
Bore size 6 mm dimensional drawing
Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing
(Unit: mm)
| Bore size (mm) | A | D | F | G1 | G2 | H | I | J | MM | N1 | N2 | NA | NN | P | S | ZZ | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - | TN | TF | ||||||||||||||||
| 10 | 15 | 4 | 8 | 15 | 6 | 28 | 18.5 | 16 | M4 × 0.7 | 11 | 20 | 16 | M12 × 1 | M5 × 0.8 | - | - | 65 | 101 |
| 16 | 15 | 5 | 10 | 15 | 6 | 30 | 22 | 22 | M5 × 0.8 | 12 | 21 | 19.5 | M14 × 1 | M5 × 0.8 | - | - | 74 | 114 |
| 20 | 18 | 8 | 13 | 25 | 8.5 | 40.5 | 31.5 | 28.5 | M8 × 1.25 | 20.5 | 33 | 29 | M20 × 1.5 | Rc 1/8 | NPT 1/8 | G 1/8 | 97.5 | 151 |
| 25 | 18 | 10 | 13 | 30 | 8.5 | 44.5 | 34.5 | 32 | M10 × 1.25 | 20.5 | 38 | 32 | M26 × 1.5 | Rc 1/8 | NPT 1/8 | G 1/8 | 102.5 | 160 |
*See the manufacturer's catalog regarding the rod-end nut and mounting nut.
Foot type: MQMLL
Bore size 6 mm dimensional drawing
Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing
(Unit: mm)
| Bore size (mm) | LC | LH | LS | LT | LX | LY | LZ | S | X | Y | Z | ZZ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 5.5 | 14 | 83 | 2.3 | 33 | 25 | 42 | 65 | 6 | 9 | 19 | 108 |
| 16 | 5.5 | 18 | 92 | 2.3 | 42 | 30 | 54 | 74 | 6 | 9 | 21 | 119 |
| 20 | 6.8 | 25 | 137.5 | 3.2 | 40 | 40 | 55 | 97.5 | 8 | 20 | 20.5 | 166 |
| 25 | 6.8 | 28 | 142.5 | 3.2 | 40 | 47 | 55 | 102.5 | 8 | 20 | 24.5 | 175 |
- *See the manufacturer's catalog for other specifications, dimensions, included fitting dimensions, etc.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Operating Temperature (°C) | End Locking | Valves | Operating Pressure (MPa) | Cushion | Operating Pressure (MPa) | Specifications | Port thread type | Type of Mount Support | Type | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 961.27 | 1 Piece(s) | 27 Day(s) or more | 16 | 35 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 969.29 | 1 Piece(s) | 27 Day(s) or more | 16 | 39 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 969.29 | 1 Piece(s) | 27 Day(s) or more | 16 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 945.66 | 1 Piece(s) | 14 Day(s) or more | 16 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 985.10 | 1 Piece(s) | 27 Day(s) or more | 16 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 961.46 | 1 Piece(s) | 27 Day(s) or more | 16 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 977.22 | 1 Piece(s) | 27 Day(s) or more | 16 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,008.73 | 1 Piece(s) | 14 Day(s) or more | 16 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 999.15 | 1 Piece(s) | 27 Day(s) or more | 16 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,008.73 | 1 Piece(s) | 27 Day(s) or more | 16 | 6 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,008.73 | 1 Piece(s) | 27 Day(s) or more | 16 | 8 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,003.28 | 1 Piece(s) | 27 Day(s) or more | 16 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 985.10 | 1 Piece(s) | 27 Day(s) or more | 16 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,015.83 | 1 Piece(s) | 27 Day(s) or more | 16 | 16 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,024.54 | 1 Piece(s) | 27 Day(s) or more | 16 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,024.54 | 1 Piece(s) | 27 Day(s) or more | 16 | 21 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,024.54 | 1 Piece(s) | 27 Day(s) or more | 16 | 25 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,000.85 | 1 Piece(s) | 27 Day(s) or more | 16 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,032.34 | 1 Piece(s) | 27 Day(s) or more | 16 | 35 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,016.61 | 1 Piece(s) | 27 Day(s) or more | 16 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,048.90 | 1 Piece(s) | 27 Day(s) or more | 16 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,032.41 | 1 Piece(s) | 27 Day(s) or more | 16 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,065.46 | 1 Piece(s) | 27 Day(s) or more | 16 | 70 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,048.17 | 1 Piece(s) | 27 Day(s) or more | 16 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,097.89 | 1 Piece(s) | 27 Day(s) or more | 16 | 90 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,079.68 | 1 Piece(s) | 27 Day(s) or more | 16 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 949.97 | 1 Piece(s) | 27 Day(s) or more | 20 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 992.97 | 1 Piece(s) | 27 Day(s) or more | 20 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 969.29 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,008.63 | 1 Piece(s) | 27 Day(s) or more | 20 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 989.41 | 1 Piece(s) | 27 Day(s) or more | 20 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,032.41 | 1 Piece(s) | 27 Day(s) or more | 20 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,008.73 | 1 Piece(s) | 27 Day(s) or more | 20 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,028.85 | 1 Piece(s) | 27 Day(s) or more | 20 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,068.24 | 1 Piece(s) | 27 Day(s) or more | 20 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,044.55 | 1 Piece(s) | 27 Day(s) or more | 20 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,020.92 | 1 Piece(s) | 27 Day(s) or more | 20 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,063.93 | 1 Piece(s) | 27 Day(s) or more | 20 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,040.24 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,060.36 | 1 Piece(s) | 27 Day(s) or more | 20 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,079.68 | 1 Piece(s) | 27 Day(s) or more | 20 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,099.80 | 1 Piece(s) | 27 Day(s) or more | 20 | 75 | Low Friction (Internal Resistance) / High speed / high frequency | -10～80 | No | No | 0.005～0.7 | Rubber bumper (standard) | - | - | Rc | U-Shaped Clevis Type | Lateral load resisting type (built-in ball bushing) | Metal seal | ||
MYR 1,139.19 | 1 Piece(s) | 27 Day(s) or more | 20 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 970.66 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,016.03 | 1 Piece(s) | 27 Day(s) or more | 20 | 35 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,013.15 | 1 Piece(s) | 27 Day(s) or more | 20 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,034.82 | 1 Piece(s) | 27 Day(s) or more | 20 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,050.53 | 1 Piece(s) | 27 Day(s) or more | 20 | 1 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,083.99 | 1 Piece(s) | 27 Day(s) or more | 20 | - | Low Friction (Internal Resistance) / High speed / high frequency | -10～80 | No | No | 0.005～0.7 | Rubber bumper (standard) | - | - | G | U-Shaped Clevis Type | Lateral load resisting type (built-in ball bushing) | Metal seal | ||
MYR 970.66 | 1 Piece(s) | 27 Day(s) or more | 20 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | NPT | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,068.27 | 1 Piece(s) | 27 Day(s) or more | 25 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,040.24 | 1 Piece(s) | 27 Day(s) or more | 25 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,063.93 | 1 Piece(s) | 27 Day(s) or more | 25 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,111.19 | 1 Piece(s) | 27 Day(s) or more | 25 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,087.56 | 1 Piece(s) | 27 Day(s) or more | 25 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,111.19 | 1 Piece(s) | 27 Day(s) or more | 25 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,134.88 | 1 Piece(s) | 27 Day(s) or more | 25 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,182.19 | 1 Piece(s) | 14 Day(s) or more | 25 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,134.88 | 1 Piece(s) | 27 Day(s) or more | 25 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,111.19 | 1 Piece(s) | 27 Day(s) or more | 25 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,158.51 | 1 Piece(s) | 27 Day(s) or more | 25 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,158.51 | 1 Piece(s) | 27 Day(s) or more | 25 | 22 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,134.88 | 1 Piece(s) | 27 Day(s) or more | 25 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,158.51 | 1 Piece(s) | 27 Day(s) or more | 25 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,215.65 | 1 Piece(s) | 27 Day(s) or more | 25 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,182.19 | 1 Piece(s) | 27 Day(s) or more | 25 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,205.83 | 1 Piece(s) | 27 Day(s) or more | 25 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,253.15 | 1 Piece(s) | 27 Day(s) or more | 25 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | Rc | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,195.24 | 1 Piece(s) | 27 Day(s) or more | 25 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,147.87 | 1 Piece(s) | 27 Day(s) or more | 25 | 1 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,266.19 | 1 Piece(s) | 27 Day(s) or more | 25 | 100 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | G | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,120.64 | 1 Piece(s) | 27 Day(s) or more | 25 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | NPT | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,217.07 | 1 Piece(s) | 27 Day(s) or more | 25 | 75 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | NPT | U-Shaped Clevis Type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 823.82 | 1 Piece(s) | 27 Day(s) or more | 6 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 800.19 | 1 Piece(s) | 27 Day(s) or more | 6 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 839.63 | 1 Piece(s) | 27 Day(s) or more | 6 | 20 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 815.99 | 1 Piece(s) | 27 Day(s) or more | 6 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 850.92 | 1 Piece(s) | 27 Day(s) or more | 6 | 40 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 831.70 | 1 Piece(s) | 27 Day(s) or more | 6 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 847.50 | 1 Piece(s) | 27 Day(s) or more | 6 | 60 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.02 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 843.77 | 1 Piece(s) | 27 Day(s) or more | 10 | 3 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 843.77 | 1 Piece(s) | 27 Day(s) or more | 10 | 4 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 844.51 | 1 Piece(s) | 27 Day(s) or more | 10 | 5 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 843.77 | 1 Piece(s) | 27 Day(s) or more | 10 | 7 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 843.66 | 1 Piece(s) | 27 Day(s) or more | 10 | 10 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 803.85 | 1 Piece(s) | 27 Day(s) or more | 10 | 15 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 847.50 | 1 Piece(s) | 27 Day(s) or more | 10 | 30 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 863.27 | 1 Piece(s) | 27 Day(s) or more | 10 | 45 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 902.65 | 1 Piece(s) | 27 Day(s) or more | 10 | 50 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 898.24 | 1 Piece(s) | 27 Day(s) or more | 10 | 55 | Standard / Low Friction (Internal Resistance) / Low Speed | - | - | - | - | Rubber bumper (Standard) | 0.005 to 0.7 | Function: Standard type | M Screw | Rod-end flange type | Lateral load resisting type (Built-in ball bushing) | Metal seal |
Loading...
Basic Information
| Rod Operation Method | Single Rods | Main Body Shape | Standard | Cylinder Operation Method | Double Acting |
|---|---|---|---|---|---|
| Additional Function | Standard | Tube Material | Special stainless steel | Specification of cylinder | Lateral load resisting low friction cylinder |
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Environment, Applications
- Standard
- Low Friction (Internal Resistance)
- High speed / high frequency
- Low Speed
-
End Locking
- No
-
Valves
- No
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
- Function: Standard type
- Function: high speed / high frequency type (without fixed throttle)
-
Port thread type
- G
- M Screw
- NPT
- Rc
-
Type of Mount Support
- Basic type
- Foot
- Head-end flange
- Rod-end flange type
- Single clevis type (mounting type)
- U-Shaped Clevis Type
-
Type
- Lateral load resisting type (Built-in ball bushing)
- Lateral load resisting type (built-in ball bushing)
-
Sealing materials
- Metal seal
-
type
- MQML
- MQML□10
- MQML□20
- MQML□25
- MQML□6
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 14 Day(s) or Less
- 21 Day(s) or Less
- 24 Day(s) or Less
- 27 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Space Saving Small Sized Cylinder Series With Vacuum Suction MVC
- Push-in joint ultra small size cylinder MKY series
- Barb coupler type ultra-compact cylinder TKY series
- Compact Low-Friction Cylinder MQQ Series
- Free Mount Cylinder, Long Stroke Type, Non-Rotating Rod, Double Acting: Single Rod CUK Series
- Stopper Cylinder, Mounting Height Adjustment Type, RSG Series
- High-Precision Stroke Reading Cylinder, Non-Rotating Piston Type, CEP1 Series
- Stopper Cylinder, Fixed Mounting Height, Rechargeable Battery Compatible, 25A-RSQ Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy