(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
S Coupler Semi-Standard Socket (With Sleeve Lock Mechanism) KK130L Series
An energy-saving type S coupler one-touch joint achieved through reduced losses in pressure.
[Features]
· Air consumption amount can be reduced and costs kept down by reducing the compressor's power consumption.
· 12‑g lighter than the conventional product.
· The plug insertion force has been reduced by 20 N in comparison to the conventional product (at 0.5 MPa.)
· The C factor has been increased by 34% in comparison to the conventional product (R1/4 thread type.)
· Includes a lock mechanism for preventing detachment due to unexpected impact, etc.
(i)Caution
- Refer to the catalog for product specs.
- The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.
Part Number
Configured Part Number is shown.
S Coupler KK130 Socket specifications
Common specifications
| Operating fluid | Air Note: |
|---|---|
| Operating pressure range | 0 to 1.5 MPa |
| One-touch fitting type: 0 to 1.0 MPa | |
| Guaranteed proof pressure | 2.0 MPa |
| Ambient temperature and working fluid temperature | -20 to 80°C (no freezing) |
| One-touch fitting type: -5 to 60°C (No freezing) | |
| Plating | Sleeve: electroless nickel plating Other external metal parts: zinc chromate |
| Seal | Includes male thread sealant |
Note: Cannot be used for water.
Common performance
| Plug/socket connection method | Sleeve-slide detachable type |
|---|---|
| Check valve | Socket: built-in check valve |
| Flow direction | Both directions |
| Sleeve lock mechanism | Manual lock system (with detents), semi-standard |
Male thread type
Male Thread Type external appearance
Male Thread Type dimensional drawing (Units: mm)
| Model | T Connection male thread | H Width across flats | L1 | A *1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|
| KK130S(L)-01MS | R1/8 | 22 | 44.0 | 40.0 | 6.0 | 73 |
| KK130S(L)-02MS | R1/4 | 22 | 46.8 | 40.8 | 8.5 | 74 |
| KK130S(L)-03MS | R3/8 | 22 | 46.2 | 39.7 | 8.5 | 82 |
| KK130S(L)-04MS | R1/2 | 22 | 47.8 | 39.8 | 14.0 | 83 |
| KK130S(L)-N01MS | NPT1/8 | 22 | 44.3 | 39.3 | 6.0 | 73 |
| KK130S(L)-N02MS | NPT1/4 | 22 | 47.4 | 39.9 | 8.5 | 74 |
| KK130S(L)-N03MS | NPT3/8 | 22 | 46.6 | 39.1 | 8.5 | 82 |
| KK130S(L)-N04MS | NPT1/2 | 22 | 48.2 | 38.2 | 14.0 | 83 |
Unit: mm
*1: Reference dimensions after screwing in.
Female thread type
Female Thread Type external appearance
Female Thread Type dimensional drawing (Units: mm)
| Model | T Connection male thread | H Width across flats | L1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|
| KK130S(L)-01F | Rc1/8 | 22 | 41.9 | 8.0 | 90 |
| KK130S(L)-02F | Rc1/4 | 22 | 45.4 | 11.0 | 92 |
| KK130S(L)-03F | Rc3/8 | 22 | 48.4 | 11.0 | 91 |
| KK130S(L)-04F | Rc1/2 | 27 | 52.9 | 14.0 | 117 |
| KK130S(L)-N01F | NPT1/8 | 22 | 41.9 | 8.0 | 90 |
| KK130S(L)-N02F | NPT1/4 | 22 | 45.4 | 11.0 | 92 |
| KK130S(L)-N03F | NPT3/8 | 22 | 48.4 | 11.0 | 91 |
| KK130S(L)-N04F | NPT1/2 | 27 | 52.9 | 14.0 | 117 |
Unit: mm
Barb fitting type (for rubber hoses)
Barb Fitting Type (For Rubber Hoses) external appearance
Barb Fitting Type (For Rubber Hoses) dimensional drawing (Units: mm)
| Model | Nominal of hose | øD1 | L1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|
| KK130S(L)-07B | 6 (1/4 ") | 7.2 | 60.9 | 4.5 | 70 |
| KK130S(L)-09B | 8 (1/4 ") | 9.0 | 60.4 | 5.0 | 72 |
| KK130S(L)-11B | 9 (3/8 ") | 11.3 | 59.9 | 7.7 | 73 |
| KK130S(L)-13B | 12 (1/2 ") | 15.0 | 58.9 | 9.0 | 81 |
Unit: mm
*The values within () represent the internal diameter of applicable hoses
Nut Fitting Type (For Fiber Reinforced Urethane Hose)
Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance
Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing (Units: mm)
| Model | Applicable hose Internal diameter / outer diameter | H1 | H2 | L1 | M | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|---|
| KK130S(L)-50N | 5/8 | 22 | 14 | 49.6 | 13.7 | 4.5 | 85 |
| KK130S(L)-60N | 6/9 | 22 | 17 | 51.6 | 16.4 | 5.5 | 95 |
| KK130S(L)-65N | 6.5/10 | 22 | 17 | 51.6 | 16.5 | 6.0 | 92 |
| KK130S(L)-80N | 8/12 | 22 | 19 | 52.6 | 17.4 | 8.0 | 97 |
| KK130S(L)-85N | 8.5/12.5 | 22 | 19 | 52.6 | 17.4 | 8.0 | 101 |
| KK130S(L)-110N | 11/16 | 24 | 24 | 52.6 | 20.1 | 10.0 | 119 |
Unit: mm
One-touch fitting type
One-Touch Fitting Type external appearance
One-Touch Fitting Type dimensional drawing (Units: mm)
| Model | Applicable tube outer diameter mm | D | L1 | M | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|
| KK130S(L)-06H | 6 | 13.0 | 52.3 | 16.7 | 4.5 | 72 |
| KK130S(L)-08H | 8 | 14.8 | 53.3 | 18.6 | 6.0 | 74 |
| KK130S(L)-10H | 10 | 17.8 | 55.3 | 20.7 | 9.0 | 77 |
| KK130S(L)-12H | 12 | 20.0 | 55.3 | 21.7 | 9.0 | 80 |
| KK130S(L)-07H | 1/4 " | 13.0 | 52.3 | 16.7 | 4.5 | 72 |
| KK130S(L)-09H | 5/16 " | 14.8 | 53.3 | 18.6 | 6.0 | 74 |
| KK130S(L)-11H | 3/8 " | 17.6 | 55.3 | 20.7 | 7.0 | 79 |
| KK130S(L)-13H | 1/2 " | 20.0 | 55.3 | 21.7 | 9.0 | 78 |
Unit: mm
*Refer to the manufacturer's catalog for specifications other than those above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Joint Type | Operating Temperature Range (°C) | Pipe Connection Bore Dia. | Nominal Designation of Hose (mm / (Inch)) | Applicable Hose Inner Diameter / Outer Diameter (mm) | Applicable Tube O.D. (mm) | Applicable Tube O.D. (Inch) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 39.06 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | Rc 1/8 | - | - | - | - | ||
MYR 59.58 | 1 Piece(s) | 21 Day(s) | Threaded Type | -20～80 | R 1/8 | - | - | - | - | ||
MYR 39.12 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | Rc 1/4 | - | - | - | - | ||
MYR 34.73 | 5 Piece(s) | 9 Day(s) or more | Threaded Type | -20～80 | R 1/4 | - | - | - | - | ||
MYR 39.07 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | Rc 3/8 | - | - | - | - | ||
MYR 33.30 | 5 Piece(s) | 5 Day(s) or more | Threaded Type | -20～80 | R 3/8 | - | - | - | - | ||
MYR 43.62 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | Rc 1/2 | - | - | - | - | ||
MYR 44.70 | 1 Piece(s) | 3 Day(s) | Threaded Type | -20～80 | R 1/2 | - | - | - | - | ||
MYR 42.40 | 5 Piece(s) | 9 Day(s) or more | With One-Touch Couplings | - | - | - | - | 6 | - | ||
MYR 38.32 | 5 Piece(s) | 14 Day(s) or more | - | -20～80 | - | 6 (1/4") | - | - | - | ||
MYR 47.00 | 5 Piece(s) | 14 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 1/4 | ||
MYR 50.00 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 8 | - | ||
MYR 38.38 | 5 Piece(s) | 14 Day(s) or more | - | -20～80 | - | 8 (1/4") | - | - | - | ||
MYR 47.07 | 5 Piece(s) | 17 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 5/16 | ||
MYR 51.80 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 10 | - | ||
MYR 38.44 | 5 Piece(s) | 14 Day(s) or more | - | -20～80 | - | 9 (3/8") | - | - | - | ||
MYR 48.69 | 5 Piece(s) | 13 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 3/8 | ||
MYR 53.60 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 12 | - | ||
MYR 40.20 | 1 Piece(s) | 3 Day(s) | - | -20～80 | - | 12 (1/2") | - | - | - | ||
MYR 50.12 | 5 Piece(s) | 13 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 1/2 | ||
MYR 67.55 | 1 Piece(s) | 21 Day(s) | Nut Tightening Type | -20～80 | - | - | 5/8 | - | - | ||
MYR 44.25 | 5 Piece(s) | 17 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 6/9 | - | - | ||
MYR 45.01 | 5 Piece(s) | 14 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 8/12 | - | - | ||
MYR 45.18 | 5 Piece(s) | 14 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 8.5/12.5 | - | - | ||
MYR 46.60 | 5 Piece(s) | 14 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 11/16 | - | - | ||
MYR 39.06 | 5 Piece(s) | 17 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 1/8 | - | - | - | - | ||
MYR 38.44 | 5 Piece(s) | 17 Day(s) or more | Threaded Type | -20～80 | NPT 1/8 | - | - | - | - | ||
MYR 39.07 | 5 Piece(s) | 17 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 1/4 | - | - | - | - | ||
MYR 38.50 | 5 Piece(s) | 17 Day(s) or more | Threaded Type | -20～80 | NPT 1/4 | - | - | - | - | ||
MYR 39.07 | 5 Piece(s) | 17 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 3/8 | - | - | - | - | ||
MYR 38.75 | 5 Piece(s) | 17 Day(s) or more | Threaded Type | -20～80 | NPT 3/8 | - | - | - | - | ||
MYR 43.62 | 5 Piece(s) | 17 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 1/2 | - | - | - | - | ||
MYR 42.38 | 5 Piece(s) | 13 Day(s) or more | Threaded Type | -20～80 | NPT 1/2 | - | - | - | - |
Loading...
Basic Information
| Male/Female | Non-Standard Sockets | Body Material | Steel for construction | Applicable Fluid | Air |
|---|---|---|---|---|---|
| Type | Standard | Valve Structure | Single Passage Opening Closing Type | With or Without Check Valve | Yes |
Specification/Dimensions
-
Joint Type
- Threaded Type
- Female Threaded Tapped
- With One-Touch Couplings
- Nut Tightening Type
-
Pipe Connection Bore Dia.
- NPT 1/2
- R 1/2
- Rc 1/2
- NPT 1/4
- R 1/4
- Rc 1/4
- NPT 1/8
- R 1/8
- Rc 1/8
- NPT 3/8
- R 3/8
- Rc 3/8
-
Nominal Designation of Hose(mm / (Inch))
- 6 (1/4")
- 8 (1/4")
- 9 (3/8")
- 12 (1/2")
-
Applicable Hose Inner Diameter / Outer Diameter(mm)
- 5/8
- 6/9
- 8/12
- 8.5/12.5
- 11/16
-
Applicable Tube O.D.(mm)
- 6
- 8
- 10
- 12
-
Applicable Tube O.D.(Inch)
- 1/2
- 1/4
- 3/8
- 5/16
-
type
- KK130□-N□F
- KK130□-N□MS
- KK130□-□B
- KK130□-□F
- KK130□-□H
- KK130□-□MS
- KK130□-□N
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 5 Day(s) or Less
- 9 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 17 Day(s) or Less
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Connector, Male Unit, Straight
- UNIC Type, Socket MS Type
- Free Line Cup FR-Type
- Mega Flow x Coupling, Made of Brass Purge Type Threaded Type
- Aluminum Lever Coupling, Hose Shank Coupler OZ-C
- Rc female threaded coupling (Stainless Steel)
- male threaded plug (20 type/stainless steel)
- male thread socket (20 type/stainless steel)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy