(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
S Coupler Plug KK130P Series (Part Numbers)
An energy-saving type S coupler one-touch joint achieved through reduced losses in pressure.
[Features]
・ Plug: Heat treatment reduces dents, deformation and wear
・ C value: Up 34% (Screw R1/4 type Compared to conventional products * )
・ Plug insertion force: 22% (20 N) reduction (At 0.5 MPa Compared to conventional products * )
・ Lightweight: 14% (12 g) reduction (Compared to conventional products * )
・ * Conventional product: KK13 Series
・ It standardizes quick-connect fitting type
・ Locking mechanism (semi-standard) prevents disconnection due to unexpected impact, etc.
・ It holds locked and unlocked positions due to sleeve with detent
(i)Caution
- Refer to the catalog for product specs.
- The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.
Part Number
Configured Part Number is shown.
S Coupler KK130 Series Plug specifications
Specifications
| Operating fluid | Air Note: |
|---|---|
| Operating pressure range | 0 to 1.5 MPa One-touch fitting type: 0 to 1.0 MPa |
| Guaranteed proof pressure | 2.0 MPa |
| Ambient temperature and working fluid temperature | -20 to 80°C (no freezing) One-touch fitting type: -5 to 60°C (no freezing) |
| Plating | Sleeve: electroless nickel plating Other external metal parts: zinc chromate |
| Seal | Includes male thread sealant |
Note: Cannot be used for water.
Performance
| Plug/socket connection method | Sleeve-slide detachable type |
|---|---|
| Check valve | Socket: built-in check valve |
| Flow direction | Both directions |
| Sleeve lock mechanism | Manual lock system (with detents), semi-standard |
Flow rate characteristics (representative value)
Flow rate characteristics
- *Note: This flow rate characteristics testing method conforms to JIS B 8390 standards (Pneumatic fluid power – Components using compressible fluids – Determination of flow-rate characteristics.)
- *Note: The figures are representative values when the same type of plug and socket are connected.
| Connection type | Sonic conductance C [dm3/(s-bar)] | Critical pressure ratio b | Flow coefficient Cv | Effective area S [mm2] | ||
|---|---|---|---|---|---|---|
| Type | Symbol | Connection | ||||
| Male thread | -01MS | R1/8 | 4.2 | 0.4 | 1.2 | 21 |
| -02MS | R1/4 | 7.0 | 0.4 | 1.9 | 35 | |
| -03MS | R3/8 | 7.0 | 0.5 | 2.1 | 35 | |
| -04MS | R1/2 | 7.0 | 0.5 | 2.1 | 35 | |
| Female thread | -01F | Rc1/8 | 6.0 | 0.5 | 1.8 | 30 |
| -02F | Rc1/4 | 7.0 | 0.5 | 2.1 | 35 | |
| -03F | Rc3/8 | 7.0 | 0.5 | 2.1 | 35 | |
| -04F | Rc1/2 | 7.0 | 0.5 | 2.1 | 35 | |
| With barb fitting | -07B | 6 (1/4 ") | 2.0 | 0.4 | 0.5 | 10 |
| -09B | 8 (1/4 ") | 3.0 | 0.4 | 0.8 | 15 | |
| -11B | 10 (3/8 ") | 6.0 | 0.5 | 1.8 | 30 | |
| -13B | 12 (1/2 ") | 7.0 | 0.5 | 2.1 | 35 | |
| With nut fitting | -50N | 5/8 | 2.0 | 0.4 | 0.5 | 10 |
| -60N | 6/9 | 3.5 | 0.4 | 1.0 | 18 | |
| -65N | 6.5/10 | 4.2 | 0.4 | 1.2 | 21 | |
| -80N | 8/12 | 7.0 | 0.4 | 1.9 | 35 | |
| -85N | 8.5/12.5 | 7.0 | 0.4 | 1.9 | 35 | |
| -110N | 11/16 | 7.0 | 0.5 | 2.1 | 35 | |
| With one-touch fitting | -06H | ø6 | 2.0 | 0.4 | 0.5 | 10 |
| -08H | ø8 | 4.4 | 0.5 | 1.3 | 22 | |
| -10H | ø10 | 7.0 | 0.5 | 1.8 | 35 | |
| -12H | ø12 | 7.0 | 0.5 | 2.1 | 35 | |
Male Thread Type outline dimensional drawing
Plug - Male Thread Type external appearance
Plug - Male Thread Type dimensional drawing
Plug - Male Thread Type dimensional drawing (with socket connection)
| Model | T Connection male thread | H Width across flats | L1 | L2 | A *1 | Minimum hole diameter | Weight g | When connected |
|---|---|---|---|---|---|---|---|---|
| Overall length L3 | ||||||||
| KK130P-01MS | R1/8 | 14 | 34.0 | 11.1 | 30.0 | 6.0 | 18 | 51.1 |
| KK130P-02MS | R1/4 | 14 | 38.0 | 13.1 | 32.0 | 8.0 | 22 | 53.9 |
| KK130P-03MS | R3/8 | 19 | 39.0 | 13.6 | 32.5 | 8.0 | 37 | 53.3 |
| KK130P-04MS | R1/2 | 22 | 43.0 | 16.1 | 35.0 | 8.0 | 52 | 55.9 |
| KK130P-N01MS | NPT1/8 | 14 | 34.0 | 10.1 | 29.0 | 6.0 | 18 | 49.4 |
| KK130P-N02MS | NPT1/4 | 14 | 38.0 | 11.6 | 30.5 | 8.0 | 22 | 51.5 |
| KK130P-N03MS | NPT3/8 | 19 | 39.0 | 12.6 | 31.5 | 8.0 | 37 | 51.7 |
| KK130P-N04MS | NPT1/2 | 22 | 43.0 | 14.1 | 33.0 | 8.0 | 52 | 52.3 |
Units: mm
*1: Reference dimensions after screwing in.
Female Thread Type outline dimensional drawing
Plug - Female Thread Type external appearance
Plug - Female Thread Type dimensional drawing
Plug - Female Thread Type dimensional drawing (with socket connection)
| Model | T Connection male thread | H Width across flats | L1 | L2 | Minimum hole diameter | Weight g | When connected |
|---|---|---|---|---|---|---|---|
| Overall length L3 | |||||||
| KK130P-01F | Rc1/8 | 14 | 30.0 | 11.1 | 8.0 | 18 | 53.0 |
| KK130P-02F | Rc1/4 | 17 | 36.0 | 17.1 | 8.0 | 28 | 62.5 |
| KK130P-03F | Rc3/8 | 21 | 37.0 | 18.1 | 8.0 | 38 | 66.5 |
| KK130P-04F | Rc1/2 | 27 | 42.0 | 23.1 | 8.0 | 73 | 76.0 |
| KK130P-N01F | NPT1/8 | 14 | 30.0 | 11.1 | 8.0 | 18 | 53.0 |
| KK130P-N02F | NPT1/4 | 17 | 36.0 | 17.1 | 8.0 | 28 | 62.5 |
| KK130P-N03F | NPT3/8 | 21 | 37.0 | 18.1 | 8.0 | 38 | 66.5 |
| KK130P-N04F | NPT1/2 | 27 | 42.0 | 23.1 | 8.0 | 73 | 76.0 |
Unit: mm
Barb Fitting Type (For Rubber Hoses) outline dimensional drawing
Plug - Barb Fitting Type (For Rubber Hoses) external appearance
Barb Fitting Type (For Rubber Hoses) dimensional drawing
Barb Fitting Type (For Rubber Hoses) dimensional drawing (with socket connection)
| Model | Nominal of hose | φD1 | φD2 | L1 | L2 | Minimum hole diameter | Weight g | When connected |
|---|---|---|---|---|---|---|---|---|
| Overall length L3 | ||||||||
| KK130P-07B | 6 (1/4 ") | 7.2 | 14.0 | 46.0 | 27.1 | 4.5 | 16 | 88.0 |
| KK130P-09B | 8 (1/4 ") | 9.0 | 15.0 | 46.0 | 27.1 | 5.0 | 19 | 87.5 |
| KK130P-11B | 9 (3/8 ") | 11.3 | 16.0 | 46.0 | 27.1 | 8.0 | 19 | 87.0 |
| KK130P-13B | 12 (1/2 ") | 15.0 | 18.0 | 46.0 | 27.1 | 8.0 | 33 | 86.0 |
Unit: mm
- *The values within () represent the internal diameter of applicable hoses.
- *Note: Refer to the manufacturer's catalog for specifications other than those above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Joint Type | Operating Temperature Range (°C) | Pipe Connection Bore Dia. | Nominal Designation of Hose (mm / (Inch)) | Applicable Hose Inner Diameter / Outer Diameter (mm) | Applicable Tube O.D. (mm) | Applicable Tube O.D. (Inch) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 7.07 | 5 Piece(s) | 5 Day(s) or more | Female Threaded Tapped | -20～80 | Rc 1/8 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Threaded Type | -20～80 | R 1/8 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Female Threaded Tapped | -20～80 | Rc 1/4 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 43 Day(s) | Threaded Type | -20～80 | R 1/4 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Female Threaded Tapped | -20～80 | Rc 3/8 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Threaded Type | -20～80 | R 3/8 | - | - | - | - | ||
MYR 16.20 | 1 Piece(s) | 3 Day(s) | Female Threaded Tapped | -20～80 | Rc 1/2 | - | - | - | - | ||
MYR 16.20 | 1 Piece(s) | 43 Day(s) | Threaded Type | -20～80 | R 1/2 | - | - | - | - | ||
MYR 25.60 | 1 Piece(s) | 2 Day(s) | With One-Touch Couplings | - | - | - | - | 6 | - | ||
MYR 7.75 | 5 Piece(s) | 5 Day(s) or more | - | -20～80 | - | 6 (1/4") | - | - | - | ||
MYR 22.40 | 1 Piece(s) | 43 Day(s) | With One-Touch Couplings | - | - | - | - | - | 1/4 | ||
MYR 22.40 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 8 | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | - | -20～80 | - | 8 (1/4") | - | - | - | ||
MYR 16.63 | 5 Piece(s) | 14 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 5/16 | ||
MYR 28.00 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 10 | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | - | -20～80 | - | 9 (3/8") | - | - | - | ||
MYR 20.99 | 5 Piece(s) | 14 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 3/8 | ||
MYR 28.00 | 1 Piece(s) | 3 Day(s) | With One-Touch Couplings | - | - | - | - | 12 | - | ||
MYR 10.94 | 5 Piece(s) | 5 Day(s) or more | - | -20～80 | - | 12 (1/2") | - | - | - | ||
MYR 21.06 | 5 Piece(s) | 9 Day(s) or more | With One-Touch Couplings | - | - | - | - | - | 1/2 | ||
MYR 18.50 | 1 Piece(s) | 3 Day(s) | Nut Tightening Type | -20～80 | - | - | 5/8 | - | - | ||
MYR 15.12 | 5 Piece(s) | 9 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 6/9 | - | - | ||
MYR 18.50 | 1 Piece(s) | 3 Day(s) | Nut Tightening Type | -20～80 | - | - | 6.5/10 | - | - | ||
MYR 18.50 | 1 Piece(s) | 3 Day(s) | Nut Tightening Type | -20～80 | - | - | 8/12 | - | - | ||
MYR 19.92 | 5 Piece(s) | 5 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 8.5/12.5 | - | - | ||
MYR 25.95 | 5 Piece(s) | 9 Day(s) or more | Nut Tightening Type | -20～80 | - | - | 11/16 | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Female Threaded Tapped | -20～80 | NPT 1/8 | - | - | - | - | ||
MYR 7.07 | 5 Piece(s) | 5 Day(s) or more | Threaded Type | -20～80 | NPT 1/8 | - | - | - | - | ||
MYR 8.18 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 1/4 | - | - | - | - | ||
MYR 9.50 | 1 Piece(s) | 3 Day(s) | Threaded Type | -20～80 | NPT 1/4 | - | - | - | - | ||
MYR 11.03 | 1 Piece(s) | 32 Day(s) | Female Threaded Tapped | -20～80 | NPT 3/8 | - | - | - | - | ||
MYR 7.75 | 5 Piece(s) | 9 Day(s) or more | Threaded Type | -20～80 | NPT 3/8 | - | - | - | - | ||
MYR 14.11 | 5 Piece(s) | 14 Day(s) or more | Female Threaded Tapped | -20～80 | NPT 1/2 | - | - | - | - | ||
MYR 13.36 | 5 Piece(s) | 5 Day(s) or more | Threaded Type | -20～80 | NPT 1/2 | - | - | - | - |
Loading...
Basic Information
| Male/Female | Plug | Body Material | Steel for construction | Applicable Fluid | Air |
|---|---|---|---|---|---|
| Type | Standard | Valve Structure | Single Passage Opening Closing Type | With or Without Check Valve | No |
Specification/Dimensions
-
Joint Type
- Threaded Type
- Female Threaded Tapped
- With One-Touch Couplings
- Nut Tightening Type
-
Pipe Connection Bore Dia.
- NPT 1/2
- R 1/2
- Rc 1/2
- NPT 1/4
- R 1/4
- Rc 1/4
- NPT 1/8
- R 1/8
- Rc 1/8
- NPT 3/8
- R 3/8
- Rc 3/8
-
Nominal Designation of Hose(mm / (Inch))
- 6 (1/4")
- 8 (1/4")
- 9 (3/8")
- 12 (1/2")
-
Applicable Hose Inner Diameter / Outer Diameter(mm)
- 5/8
- 6/9
- 6.5/10
- 8/12
- 8.5/12.5
- 11/16
-
Applicable Tube O.D.(mm)
- 6
- 8
- 10
- 12
-
Applicable Tube O.D.(Inch)
- 1/2
- 1/4
- 3/8
- 5/16
-
type
- KK130P-N□F
- KK130P-N□MS
- KK130P-□B
- KK130P-□F
- KK130P-□H
- KK130P-□MS
- KK130P-□N
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 3 Day(s) or Less
- 5 Day(s) or Less
- 9 Day(s) or Less
- 14 Day(s) or Less
- 32 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Air Couplers/Lightweight/Plug/Tapped
- Air Couplers/Lightweight/Socket/Threaded
- Mega Flow x Coupling, Made of Brass Purge Type Threaded Type
- Joplax W Series (for Use with water Pipes), Socket (Fluorine Rubber Specification), Male Thread Type
- Q.D.C. 101 Series, Coupler, Male Screw Type, 101C4-M
- Quick Coupling, AL TYPE40, Plug PM
- hose coupling (Brass)
- rubber gasket (Made by NBR)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy