(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Male Elbow KSL (Standard Type) Rotary One-Touch Fitting (KSL03-34S)
Quick-connect fitting for rotation that enables low torque rotation.
[Features]
・ It can be used for swinging parts and rotating parts of robots, etc.
・ Copper type cannot be used (With Electroless Nickel Plating)
・ The standard specification is with sealant
・ Tube Material: FEP, PFA, nylon, soft nylon, polyurethane
[Applications]
・ It is used for piping at right angles from the female thread section
[Please refer to this for the catalog]
・ Applicable tube outer diameter mm P.163 inch P.166
(i)Caution
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Part Number
Configured Part Number is shown.
KSL03-34S
Male Elbow KSL (Standard Type) Specifications
Male Elbow KSL external view (M5, M6)
Male Elbow KSL dimensional drawing (M5, M6)
Male Elbow KSL external view (R)
Male Elbow KSL dimensional drawing (R)
| Applicable tubing Outer diameter (mm) | Connection thread RM | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 4 | M5 × 0.8 | KSL04-M5 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| M6 × 1 | KSL04-M6 | 21 | |||||||||||
| 1/8 | KSL04-01S | 12 | 21.1 | 23.5 | 14 | ||||||||
| 6 | M5 × 0.8 | KSL06-M5 | 8 | 12.8 | 14 | 23 | 21 | 23.5 | 17 | 2.5 | 3.5 | 3.5 | 12 |
| M6 × 1 | KSL06-M6 | 21.5 | 24 | 3 | 5.0 | 5.0 | |||||||
| 1/8 | KSL06-01S | 14 | 22.1 | 25.5 | 4 | 8.6 | 8.6 | 17 | |||||
| 1/4 | KSL06-02S | 25.5 | 26.5 | 23 | |||||||||
| 8 | 1/8 | KSL08-01S | 17 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL08-02S | 29 | 31 | 29 | |||||||||
| 3/8 | KSL08-03S | 29.9 | 32 | 38 | |||||||||
| 10 | 1/4 | KSL10-02S | 22 | 18.5 | 22 | 31.5 | 33.5 | 37.5 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL10-03S | 33.9 | 38 | 64 | |||||||||
| 1/2 | KSL10-04S | 37.1 | 39.5 | 82 | |||||||||
| 12 | 3/8 | KSL12-03S | 24 | 20.9 | 24 | 34 | 35.4 | 40.5 | 22 | 8 | 35.1 | 35.1 | 76 |
| 1/2 | KSL12-04S | 38.6 | 42 | 93 | |||||||||
Units: mm
* Reference dimensions of R thread after installation
Male Elbow KSL external view (UNF)
Male Elbow KSL dimensional drawing (UNF)
Male Elbow KSL external view (NPT)
Male Elbow KSL dimensional drawing (NPT)
| Applicable tubing outer diameter (inch) | Connection thread UNF NPT | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 5/32 | 10-32UNF | KSL03-32 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| 1/8 | KSL03-34S | 12.7 | 21.1 | 23.5 | 14 | ||||||||
| 1/4 | 1/8 | KSL07-34S | 14.29 | 13.2 | 14 | 23.5 | 22.1 | 25.5 | 17 | 4 | 8.6 | 8.6 | 17 |
| 1/4 | KSL07-35S | 25.5 | 26.5 | 23 | |||||||||
| 5/16 | 1/8 | KSL09-34S | 17.46 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL09-35S | 29 | 31 | 29 | |||||||||
| 3/8 | 1/4 | KSL11-35S | 22.23 | 17.9 | 22 | 31.5 | 33.5 | 37 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL11-36S | 33.9 | 38 | 64 | |||||||||
Units: mm
* Reference dimensions of NPT thread after installation
Structural Drawing
KS Series (Standard Type) Structural Drawing
Specifications
- Usable fluids: Air
- Operating pressure range (Note 1): -100 kPa to +1 MPa
- Proof pressure: 3 MPa
- Ambient and fluid temperature: -5 to +60°C (no freezing)
- Threads: JIS B0203 (taper thread for piping), JIS B0205 (metric coarse thread), ANSI/ASMEB1.20.1 (NPT thread), JIS B0212 (Unified Fine Thread [UNF])
(Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Also, when using in a vacuum, grease may enter the inside due to the nature of its construction.
Rotating Torque / Allowable Number Of Rotations
| Applicable tubing outer diameter | ø4 | ø6 | ø8 | ø10 | ø12 | |
|---|---|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 | 0.022 | |
| Allowable number of rotations (s)-1 Note 3) | KS Series | 8.4 | 8.4 | 6.7 | 5 | 4.2 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
| Applicable Tubing Outer Diameter | ø5/32" | ø1/4" | ø5/16" | ø3/8" |
|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 |
| Allowable number of rotations (s)-1 Note 3) | 8.3 | 8.3 | 6.7 | 5 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
Principle Part Materials
| Principle parts | KS Series |
|---|---|
| Body | PBT |
| Stud, holder, guide | SUS304, C3604 (with electroless nickel plating), PBT |
| Chuck, retainer | SUS304 |
| Collet / Release button / Retaining ring | Polyacetal |
| O-ring/Seal | NBR |
| Rotary seal | NBR |
| Slide bearing | Oil-containing polyacetal |
| Scraper | - |
| Ball bearings | Bearing steel |
| Gasket | SUS304/NBR |
Notes
- *1Ball bearings are used in the rotating parts, so please implement the tube piping in such a way as to avoid lateral load. If there is lateral load applied to ball bearings, then their life expectancy may be affected adversely. Using a flexible polyurethane tube is recommended when lateral load is applied.
- *2Do not use in an environment where it will be exposed to water. Contact with water will cause outflow of the lubricating oil used in the ball bearings, affecting rotating performance and equipment life-span.
- *3Fluorine grease is used on the rotating parts.
| Part Number |
|---|
| KSL03-34S |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Applicable Tube O.D.1 (φ) | Types of connection | Connection screw |
|---|---|---|---|---|---|---|---|---|
MYR 71.20 | 1 Piece(s) | 3 Day(s) | - | 5/32 | NPT | 1/8 |
Loading...
Basic Information
| Fitting Type | Screw Mount Direction | Screw Mounting, Direction | Elbow | Body Material | Brass |
|---|---|---|---|---|---|
| Types | Single-Action / Screw | Elbows | Elbow Union | Thread Material | Brass |
| Application | Standard/Mini | Packing, Material of O-Ring | NBR | For Swivel Parts, Rotary Equipment Parts | Rotary Single-Action Pipe Fitting Elbow Union |
| Number of Connection Tubes(piece) | 1 |
Please check the type/dimensions/specifications of the part KSL03-34S in the Male Elbow KSL (Standard Type) Rotary One-Touch Fitting series.
Specification/Dimensions
-
Applicable Fluid
- Water
- Air
-
type
- KSL
-
Applicable Tube O.D.1(φ)
-
Types of connection
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
- 6×1.0
- 10-32
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 5 Day(s) or Less
- 10 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| KSL03-32 |
| KSL04-01S |
| KSL04-M5 |
| KSL04-M6 |
| KSL06-01S |
| KSL06-02S |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Applicable Tube O.D.1 (φ) | Types of connection | Connection screw |
|---|---|---|---|---|---|---|---|---|
MYR 57.44 | 2 Piece(s) | 5 Day(s) or more | - | 5/32 | UNF | 10-32 | ||
MYR 60.20 | 2 Piece(s) | 5 Day(s) or more | - | 4 | R | 1/8 | ||
MYR 70.40 | 1 Piece(s) | 3 Day(s) | Water / Air | 4 | M | 5×0.8 | ||
MYR 70.40 | 1 Piece(s) | 3 Day(s) | - | 4 | M | 6×1.0 | ||
MYR 75.30 | 1 Piece(s) | 3 Day(s) | Water / Air | 6 | R | 1/8 | ||
MYR 75.30 | 1 Piece(s) | 3 Day(s) | Water / Air | 6 | R | 1/4 |
Additional Products in this Category
- For General Piping, Tube Fitting, Union Elbow
- For General Piping, Tube Fitting, Reducer Union Tee
- Corrosion-Resistant SUS303 Equivalent Fitting Branch Triple
- Union (Stainless Steel)
- Union (Made of Fluoropolymer)
- Female Connector Elbow Union KBL Piping Module KB Series
- Delta 10-KGD Stainless Steel One-Touch Fitting, KG Series.
- Push-in Bulkhead Connector, NPQP-H Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy