(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
TF Tech-Touch, Externally Threaded Adapter
A copper pipe fitting for water supply and hot water supply that can be installed by simply inserting without using fire.
[Features]
·You can connect by simply inserting it until it clicks into place.
·Installation time can be shortened.
·Can be installed in tight spaces without tools.
·It is easy to adjust the angle during installation.
·No fire or electricity required.
·Any type of connecting copper pipe is acceptable (but not for gas or kerosene pipes).
·A full range of peripheral components are available, including an insertion check tool.
Japanese Only
Drawing
Standard table
Example of use
How to use
Connecting TF Tech Touch Fitting Reducer to TF Tech Touch 3/4 makes 3/4 x 1/2 of T/90° elbow socket, 1/2 x 3/4 of the male threaded and female threaded adapters.
★The dimensions are reference values and are subject to change without notice.
Property and performance information / test information
Tensile test
| Nominal Diameter | 1/2 | 3/4 |
|---|---|---|
| Standard value | 1000 N | 1900 N |
| Results | 2600 N | 4100 N |
Method After a pipe of appropriate length is joined to both ends of the pipe fitting, pull it and measure the joint shedding load, which shall be greater than the standard value.
Pressure resistant test
| Nominal Diameter | 1/2 | 3/4 |
|---|---|---|
| pressure | 2.5 MPa | |
| Retention time | 2 minutes | |
| Results | No leaks, destruction or other abnormalities | |
Method Apply water pressure of 2.5 MPa to the pipe fitting to check for leaks, destruction, or other abnormalities.
The retention time is 2 minutes.
Operating temperature and pressure
| Temperature | Working pressure limit |
|---|---|
| Up to 30°C | 1.6 MPa |
| Up to 65°C | 1.0 MPa |
| Up to 95°C | 0.6 MPa |
Method The working pressure is the data that confirms the basic performance of the pipe fitting, so please refer to the table on the right for actual use.
Construction procedure
Cutting
Cut the copper pipe at a right angle with a pipe cutter.
Marking
Mark the joining depth for each nominal diameter on the outer surface of the copper pipe.
| Nominal Diameter | 1/2 | 3/4 | Unit |
|---|---|---|---|
| Joining depth | 23 | 27 | mm |
Edge chamfering
Chamfer the inside and outside surfaces using a reamer or similar tool.
* Be sure to remove burrs as they may cause damage to the O-ring.
Connection
Insert the copper tube until it clicks into place, and make sure that the marking part does not change from the end of the fitting when the copper pipe is pulled.
After completing the construction of the pipeline, carry out a water pressure testing to confirm that there is no water leakage.
Ellipse correction
Correct the ellipse at the end of the pipe.
* The ellipse is not included in the tech marking.
| Part Number |
|---|
| TCH-AT-1/2-G |
| TCH-AT-1/2-R |
| TCH-AT-3/4-G |
| TCH-AT-3/4-R |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connection Thread Type | Nominal A 1 | Nominal B 1 | Applicable Pipe O.D. 1 (mm) | Nominal of Thread |
|---|---|---|---|---|---|---|---|---|---|
MYR 122.74 | 1 Piece(s) | 14 Day(s) or more | G (Threaded) | 15 | 1/2 | 15.88 | 1/2B(15A) | ||
MYR 122.74 | 1 Piece(s) | 14 Day(s) or more | [R] R | 15 | 1/2 | 15.88 | 1/2B(15A) | ||
MYR 141.74 | 1 Piece(s) | 14 Day(s) or more | G (Threaded) | 20 | 3/4 | 22.22 | 3/4B(20A) | ||
MYR 141.74 | 1 Piece(s) | 15 Day(s) or more | [R] R | 20 | 3/4 | 22.22 | 3/4B(20A) |
Loading...
Basic Information
| Applicable Fluid | Water | Material | Copper | Connection Type | Pipe⇔Screw, plug-in type |
|---|---|---|---|---|---|
| Type | Fitting | Material of Applicable Pipe | Copper | Max. Operating Pressure(MPa) | 1.6 |
| Applicable Pipe Type | Copper Pipe (for Construction) | Connection Shape | Straight Pipe⇔Screw(Union/Socket/Adapter/Connector.etc) | Fitting type | Mechanical Joint |
| Applicable Tube Size Type | Size for Copper Pipe construction | Operating Temperature Range(°C) | ::95 | Divisions of Max. Operating Pressure(MPa) | 2.0Mpa or Less |
Specification/Dimensions
-
Connection Thread Type
- R
- G (Threaded)
- R
-
Nominal A 1
-
Nominal B 1
-
Applicable Pipe O.D. 1(mm)
-
Nominal of Thread
- 1/2B(15A)
- 3/4B(20A)
-
type
- TCH
Days to Ship
-
- All
- 14 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bite Hydraulic Pipe Fittings/Elbow
- NH, Brass Half Union Low Pressure Fitting
- LA Coupling, LA Type, 45° Elbow, 45° L
- Copper Tube Fitting, Copper Tube Fitting for Hot Water Supply, Water Faucet Socket with Copper Tube Shoulder Seat
- Biting Fitting for Anti-Vibration Fitting NE-Type Steel Pipe Elbow (Female)
- Copper Tube Fitting & Valve B-1 Type Copper Tube Biting Fitting Sleeve
- Ring Copper Pipe Fittings (for Instrumentation) - L-Shaped Flared Union Fitting
- swivel flare elbow
Customers Who Viewed This Item Also Viewed
-
Copper Tube Fitting, Copper Tube Fitting for Hot Water Supply, Copper Tube External Screw Adapter for Flexible TubesMIYAKO
Standard Price : MYR 19.47
Days to Ship : 5 Day(s) or more
-
-
Copper Tube Fitting, Copper Tube Fitting for Hot Water Supply, Copper Tube External Threaded SocketMIYAKO
Standard Price : MYR 26.41-
Days to Ship : 9 Day(s) or more
-
Copper Tube Fitting, Copper Tube Fitting for Hot Water Supply, Copper Tube External Threaded AdapterMIYAKO
Standard Price : MYR 18.71-
Days to Ship : 5 Day(s) or more
-
TF Tech-Touch, Fitting ReducerTOYO FITTING
Standard Price : MYR 84.76
Days to Ship : 14 Day(s) or more
-
Fitting for Copper Pipe, Male Adapter, R Screw Mounted, BrassONDASEISAKUSYO
Standard Price : MYR 21.29-
Days to Ship : 8 Day(s) or more
-
TF Tech-Touch, Internally Threaded AdapterTOYO FITTING
Standard Price : MYR 110.08
Days to Ship : 14 Day(s) or more
-
Copper Pipe Fitting, Ferrule Ring Type Copper Tube Fitting, Male Adapter With Ferrule RingMIYAKO
Standard Price : MYR 17.45-
Days to Ship : 5 Day(s) or more
-
Copper Tube Fitting, Copper Tube Fitting for Hot Water Supply, Flameless Fitting for Copper TubesMIYAKO
Standard Price : MYR 47.00-
Days to Ship : 9 Day(s) or more
-
Rigid PVC-Lining Steel Pipe for Water Supply, VB Pipe NippleJFEPIPEFITTING
Days to Ship : 12 Day(s) or more
-
Brass Fitting, Half Union (Brass Sleeve)ONDASEISAKUSYO
Standard Price : MYR 40.39-
Days to Ship : 5 Day(s) or more
-
Copper Tube Fittings, Hot Water Supply / Refrigerant Copper Tube Fittings, Copper Tube Elbow (45°)MIYAKO
Standard Price : MYR 12.13
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy