(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Non-Contact Temperature Sensor [ES1] (ES1-LP10-N)
![Non-Contact Temperature Sensor [ES1] ES1-LP10-N](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005345158_002.jpg?$product_main$)
Part Number
Configured Part Number is shown.
ES1-LP10-N
Dimensional Drawing of OMRON Other Temperature / Humidity Sensors
Model ES1-LP3-N/Model ES1-LP10-N Main Unit of OMRON Other Temperature / Humidity Sensors
Model ES1-LW50-N/Model ES1-LW50L-N Main Unit of OMRON Other Temperature / Humidity Sensors
(The ES1-LW50-N does not have the laser output port (6) or laser switch (7).)
Model ES1-LW100-N/Model ES1-LW100L-N Main Unit of OMRON Other Temperature / Humidity Sensors
(The ES1-LW100-N does not have the laser output port (6) or laser switch (7).)
Model ES1B of OMRON Other Temperature / Humidity Sensors
Model ES1C of OMRON Other Temperature / Humidity Sensors
Specification Table of OMRON Other Temperature / Humidity Sensors
ES1-N Ratings/Performance of OMRON Other Temperature / Humidity Sensors
ES1-N
| type | No aiming laser | With aiming laser | |||||
|---|---|---|---|---|---|---|---|
| Model number | Model ES1-LP3-N | Model ES1-LP10-N | Model ES1-LW50-N | Model ES1-LW100-N | Model ES1-LW50L-N | Model ES1-LW100L-N | |
| Detector element | Thermopile | ||||||
| lens | silicon | ||||||
| Wavelength | 8–14 μm | ||||||
| output | USB Output | Resolution: 0.1°C | |||||
| Current Output | 4~20mA/-50~500℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~1,000℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~500℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~1,000℃ *1 Load impedance 250Ω or less Resolution 0.24μA | |||
| Power supply voltage | DC12 to 24V/USB bus power (USB bus power only, other than current output possible) | ||||||
| Allowable power supply voltage fluctuation | 95 to 105% of power supply voltage | ||||||
| Current consumption | 30mA or less (24V DC) | ・30mA or less (DC24V, when aiming laser is not used) ・40mA or less (DC24V, when aiming laser is used) | |||||
| Cable length | 2m±5cm | ||||||
| Measurement accuracy | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 500℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 1,000℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 500℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 1,000℃) Current output : Difference from USB output is within (±0.1% output range)℃ | |||
| Reproducibility | ・Within 0.5℃ | ・Within 1℃ (measurement temperature: -50 to 0℃) ・Within 0.5℃ (measurement temperature: 0 to 500℃) ・Within 1℃ (measurement temperature: 500 to 1,000℃) | ・Within 0.5℃ | ・Within 1℃ (measurement temperature: -50 to 0℃) ・Within 0.5℃ (measurement temperature: 0 to 500℃) ・Within 1℃ (measurement temperature: 500 to 1,000℃) | |||
| Temperature Drift | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) ・Within ±0.5℃/℃ (measurement temperature: 500 to 1,000℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) ・Within ±0.5℃/℃ (measurement temperature: 500 to 1,000℃) | |||
| Effects of electromagnetic interference *2 | Electromagnetic field discharge immunity | Within ±10℃ (80MHz to 1.0GHz) | |||||
| Conducted interference immunity | Within ±10℃ (150kHz to 80MHz) | ||||||
| Response Time | Current output: 0.14 s or less (95% response, moving average 1) | ||||||
| Emissivity | Factory setting: 0.95 Can be changed from 0.100 to 1.999 using the setting tool | ||||||
| Moving average function | Factory setting: 10 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 50 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 10 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 50 Can be changed from 1 to 1,000 using the setting tool | |||
| Operating temperature and humidity range | Temperature: 0 to 55°C, Humidity: 35 to 85% (no condensation) | ||||||
| Storage Temperature Range | -20 to 55°C (no condensation) | ||||||
| Vibration resistance | malfunction | 10~55Hz 20m/s2 3 axis direction 10min | |||||
| Durability | 10 to 55Hz, half amplitude 0.75mm, 3 axial directions 2h | ||||||
| Protective structure | No | ||||||
| Compliance standards | CE, KC, FCC, RCM | ||||||
| - | IEC60825-1, PSC, FDA | ||||||
| External dimensions | W32mm×H40mm×L58mm | W32mm×H40mm×L90.3mm | W32mm×H40mm×L60.4mm | W32mm×H40mm×L92.7mm | |||
| mass | Approx. 95g | Approx. 115g | Approx. 95g | Approx. 115g | |||
| Standard accessories | Instruction manual, mounting bracket, power/output cable (2m), installation gauge | Instruction manual, mounting bracket, power/output cable (2m) | |||||
*1. The default range is 0 to +500°C. When using in -50°C to +500°C or -50°C to +1,000°C, the range must be changed using the ES1-TOOLS.
*2. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2). In this case, the measurement error is ±10°C.
Model ES1B
| item | Model number | |
|---|---|---|
| Model ES1B | ||
| Power supply voltage | DC12/24V | |
| Allowable power supply voltage fluctuation | 90% to 110% of power supply voltage | |
| Current consumption | 20mA or less | |
| Measurement Temperature Range | 10~70℃, 60~120℃, 115~165℃, 140~260℃ | |
| Accuracy*1 | ±5℃*2 | ±2%PV or ±2℃, whichever is greater |
| ±10℃*2 | ±4%PV or ±4℃, whichever is greater | |
| ±30℃*2 | ±6%PV or ±6℃, whichever is greater | |
| ±40℃*2 | ±8%PV or ±8℃, whichever is greater | |
| Reproducibility | ±1%PV or ±1℃, whichever is greater | |
| Temperature Drift | ±0.4℃/℃ or less | |
| Effects of electromagnetic interference | Field Strength Immunity | Within ±10℃ (80-800MHz) |
| Within ±30℃ (800-1000MHz) | ||
| Conducted interference immunity | ±10℃ | |
| Measurement distance: Field of view diameter | 1:1 typ. | |
| Wavelength | 6.5 to 14.0 μm | |
| Light receiving element | Thermopile | |
| Response speed | Approximately 300 ms at 63% response | |
| Output Impedance | 1 to 4 kΩ | |
| Operating Temperature Range | -25 to +70°C (no condensation or freezing) | |
| Permitted ambient humidity | Relative humidity 35-85% | |
| Vibration resistance (durability) | 98m/s2 10~55Hz 2h each in X, Y, and Z directions | |
| Impact resistance (durability) | 300m/s2 3 times each in X, Y, and Z directions | |
| Body Material | ABS resin | |
| Protective structure | IP65 | |
| Compliance standards | CE marking*3 | |
| mass | Approx. 120g | |
| Lead Wire | Compensating wire 3m | |
| PVC coating, heat resistant up to 70℃ | ||
*1.For K thermocouple characteristics and emissivity of 0.98
*2.Example of temperature change from any reference temperature of the measurement object
: When corrected to a reference temperature of 50°C, the accuracy is
the greater of ±2% PV or ±2°C at 55°C, and ±4% PV or ±4°C at 60°C.*3.EN61326-1: Industrial electromagnetic environment (EN/IEC61326-1 Table 2)
ES1C
| item | Model number | |
|---|---|---|
| Model ES1C | ||
| Power supply voltage | DC12-24V | |
| Allowable voltage fluctuation range | 90 to 110% of rated voltage | |
| Current consumption | 70mA or less | |
| Measurement Temperature Range | 0～400℃ | |
| Measurement accuracy | 0 to 200℃: ±2℃ 201 to 400℃: ±1% PV (emissivity 0.95) | |
| Effects of electromagnetic interference | Field Strength Immunity | ±10℃ max |
| Conducted interference immunity | ±10℃ max | |
| Response Time | 100ms/90% | |
| Reproducibility | ±1% of reading | |
| Wavelength | 8–14 μm | |
| Light receiving element | Thermopile | |
| Emissivity | Fixed at 0.95 | |
| Current Output | DC4 to 20mA Load 250Ω or less | |
| Ambient Temperature Range | During use: 0 to +70°C During storage: -20 to +70°C (no freezing or condensation) | |
| Ambient Humidity Range | Use/storage: Relative humidity 35-85% | |
| Vibration resistance (durability) | 10~55Hz, amplitude 1.5mm, 2h each in X, Y, and Z directions | |
| mass | 180g | |
| Protective structure | IP67 equivalent | |
| Compliance standards | CE marking* | |
*EN61326-1: Industrial electromagnetic environment (EN/IEC61326-1 Table 2)
Bill of Materials of OMRON Other Temperature / Humidity Sensors
| No. | name |
|---|---|
| (1) | lens |
| (2) | Mounting bracket screw holes |
| (3) | Tripod screw hole |
| (4) | Power output connector |
| (5) | Micro USB Connector |
| (6) | Laser output port |
| (7) | Laser Switch |
| (8) | Installation gauge fixing hole |
| Part Number |
|---|
| ES1-LP10-N |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Type | Operating Environment | Operating Temperature Range (°C) | Lead Wire Length F (m) | Lead Wire Coating Material | Measurement temperature range (°C) | Specification | Mounting part shape |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 4,098.71 | 1 Piece(s) | 9 Day(s) or more | - | Standard | 0～55 | 2 | - | -50 to 500 | - | - |
Loading...
Basic Information
| Measurement Object | Temperature | Operating Humidity Range(%) | 35::85 | Power Supply Voltage(V) | DC12 to 24 |
|---|
Specification/Dimensions
-
Type
- Other Temperature Sensor
-
Lead Wire Coating Material
- Vinyl
-
Specification
- With Aiming Laser
- Without Aiming Laser
-
Mounting part shape
- Connector
-
type
- ES1-LP3-N
- ES1-N
- ES1B
- ES1C
-
Operating Environment
- Standard
- Heat Resistant
- Water Proofing
-
Lead Wire Length F(m)
-
Measurement temperature range(°C)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- K-Thermocouple Connectors
- Sheathed Thermocouples
- Compensation Lead Wires
- General-Purpose Temperature Sensor, Compensating Cable for K Thermocouples
- General-Purpose Temperature Sensor, K With Thermocouple Wire Coating
- Temperature Sensor (Low Cost Type) [E52]
- Temperature Sensor (Thermistor Type) [E52]
- Compensating Cable for Thermistor Temperature Sensor [E52]
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy