(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Small Safety Limit Switch [D4N]
![Small Safety Limit Switch [D4N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138046_004.jpg?$product_main$)
Safety limit switch standards. Enriched products provided globally
Part Number
Configured Part Number is shown.
Dimensional Drawing of OMRON Limit Switch
1 Conduit Type of Limit Switch
Note: Limit Switch, The dimensional tolerance of all parts not specified in the above dimensional diagrams for each model is ±0.4 mm.
*For the M12 connector, see "1-conduit type, M12 connector type common."
*For information on model numbers other than those listed above, please refer to the digital catalog.
Specification Table of OMRON Limit Switch
Structure of Limit Switch
Performance of Limit Switch
| Protective structure*1 of Limit Switch | IP67 (EN60947-5-1) | |
|---|---|---|
| Durability*2 | Mechanical | Over 1 million times |
| Electrical | 500,000 times or more (AC250V 3A, resistive load)*3 300,000 times or more (AC250V 10A, resistive load) | |
| Allowable Operating Speed | 1 to 500 mm/s (D4N-1A20R) | |
| Allowable operating frequency | Maximum 30 times/min | |
| Contact Resistance | 25mΩ or less | |
| Minimum applicable load*4 | DC5V 1mA resistive load (N level reference value) | |
| Rated insulation voltage (Ui) | 300V | |
| Rated Frequency | 50/60Hz | |
| Electric shock protection class | Class II (double insulated) | |
| Pollution level (usage environment) | Pollution degree 3 (EN60947-5-1) | |
| Impulse withstand voltage (EN60947-5-1) | Between same-polarity terminals | 2.5kV |
| Between different terminals | 4kV | |
| Between each terminal and non-current-carrying metal parts | 6kV | |
| Insulation resistance | 100MΩ or more | |
| Contact Gap | Minimum 2 x 2 mm | |
| vibration | malfunction | 10 to 55Hz, single amplitude 0.75mm |
| impact | Durability | 1,000m/s2 |
| malfunction | 300m/s2 | |
| Conditional Short Circuit Current | 100A (EN60947-5-1) | |
| Rated open thermal current (Ith) | 10A (EN60947-5-1) | |
| Ambient temperature | -30 to +70℃ (but do not freeze) | |
| Ambient humidity | 95% RH or less | |
| mass | Approximately 92g (for D4N-1A20R) | |
Note 1. The above values are initial values of Limit Switch.
2. Once a load has been switched, a load with a smaller capacity cannot be connected to the contact. This
may cause the contact surface to become rough and the contact reliability to be impaired.
*1. This protective structure is based on a test method based on the standard (EN60947-5-1), and the sealing performance under the actual usage environment and conditions should be confirmed in advance.
The switch box body is protected from the intrusion of dust, oil, water, etc., but the operation key insertion port in the head part should not be exposed to cutting chips, oil, water, chemicals,etc., when using the switch. This
may cause early wear, damage, and failure of Limit Switch.
*2. The durability conditions are at an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH.
*3. Do not apply AC250V 3A to two or more circuits.
*4. This value may change depending on the switching frequency, environmental conditions, reliability level, etc. Please check with the actual load in advance.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Main Body Size | Environment | Plunger Shape Type | Roller Lever Shape Type | Lever Shape Type | Rod Shape Type | Acquired Standards | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Max. Stroke T.T (mm) | Max. Angle T.T (deg) | Contact Type | Contact Point Type | Mechanical Life (10,000 times) | Rated Operating Voltage (V) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Lever Length R (mm) | Detector Element Details | Indicator Light | Movement After the Operation OT (mm) | Operating Position OP (mm) | Torque necessary for operation, OF (N·m) | Conduit Size | Specification of Terminal | Details Type | O.D. | Mounting System | Direction of Operation | Roller Type | Contact format | Release Key Type | Lock / Release System | Built-in Switch Specification | Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 157.43 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 154.98 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 48.2 | 82.5 | 32-66 | Adjustable roller lever type, form lock type (metal lever, rubber roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ50×8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / rubber roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 112.42 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 93.89 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 20 | One-way action roller arm lever type | - | 5 | 37±0.8 | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Slow action (direct circuit opening operation included) | Resin roller R20 | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 101.63 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 102.40 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller R26 | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 156.03 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 116.28 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 101.56 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | Standard | - | - | - | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | Roller lever type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape | - | - | Snap action (direct circuit opening operation included) | - | 2NC | - | - | 2NC (snap action) | Standard Type | ||
MYR 114.00 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 20 | One-way action roller arm lever type | - | 5 | 37±0.8 | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Slow action (direct circuit opening operation included) | Resin roller R20 | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 174.00 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard / Cold Resistance | - | Fork Lever Lock | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | - | - | - | - | - | Mutual insulation double-throw | Rivet | 1000 | DC125V / DC250V / AC100/125V / AC240/250V | 2.5 | 31 | 30 | 64 | - | Fork lever lock type | - | - | - | - | G1/2 | Ground terminal not included | 1 Conduit Shape | - | 4-direction mounting supported (front direction at shipment) / plastic | - | - | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 83.81 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 113.00 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller R26 | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 109.45 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | Variable Roller Levers | - | - | UL / CE / GB(CCC) / CSA | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape | - | - | Slow action | - | 2NC/1NO | - | - | 2NC/1NO (slow action) | Standard Type | ||
MYR 101.00 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 3 Contact, MBB Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 2NC/1NO | - | - | 2NC/1NO (slow action) | Standard Type | ||
MYR 156.86 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, metal roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 3 Contact, MBB Contact Series | φ17.5×7 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / SUS sintered alloy roller R26 | 2NC/1NO | - | - | 2NC/1NO (slow action) | Standard Type | ||
MYR 131.59 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | Standard | - | - | - | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | Roller lever type (metal lever, metal roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape | - | - | Slow action | - | 2NC/1NO | - | - | 2NC/1NO (MBB) (slow action) | Standard Type | ||
MYR 127.15 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 137.90 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (slow action) | Standard Type | ||
MYR 118.10 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 101.63 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 67.52 | 1 Piece(s) | 9 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | - | [Arm Lever] Roller, Arm Lever | - | UL / CE / GB(CCC) / CSA | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | One-way action roller arm lever type | - | - | - | - | M20 | - | 1 Conduit Shape | - | - | Slow action | - | 2NC | - | - | 2NC (slow action) | Standard Type | ||
MYR 74.15 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 112.42 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 48.2 | 82.5 | 32-66 | Adjustable roller lever type, form lock type (metal lever, rubber roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ50×8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / rubber roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 68.71 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 20 | One-way action roller arm lever type | - | 5 | 37±0.8 | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Snap action (direct circuit opening operation included) | Resin roller R20 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 195.75 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 43.6 | 82.5 | 26 | Roller lever type (metal lever, bearing roller) | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17×6 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / bearing roller R26 | 2NC | - | - | 2NC (snap action) | Standard Type | ||
MYR 74.15 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 85.38 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 93.89 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, metal roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×7 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / SUS sintered alloy roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 68.71 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 20 | One-way action roller arm lever type | - | 5 | 37±0.8 | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Snap action (direct circuit opening operation included) | Resin roller R20 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 93.89 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, metal roller) | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×7 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / SUS sintered alloy roller R26 | 2NC | - | - | 2NC (snap action) | Standard Type | ||
MYR 91.05 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever type (metal lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 85.38 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 48.2 | 82.5 | 32-66 | Adjustable roller lever type, form lock type (metal lever, rubber roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ50×8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / rubber roller, foam lock type | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 68.71 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 20 | One-way action roller arm lever type | - | 5 | 37±0.8 | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Snap action (direct circuit opening operation included) | Resin roller R20 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 68.71 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Fork Lever Lock | [Arm Lever] Roller, Arm Lever | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | 4 | - | 9 | - | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 31.5 | 64 | 19 | One-way action roller arm lever type | - | 5 | 27±0.8 | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ12.5 × 5 | Front mounting | Snap action (direct circuit opening operation included) | Resin roller R19 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 84.59 | 1 Piece(s) | 2 Day(s) | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 20-66 | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | M20 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 2NC | - | - | 2NC (snap action) | Standard Type | ||
MYR 64.38 | 1 Piece(s) | 9 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | - | [Arm Lever] Roller, Arm Lever | - | - | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | One-way action roller arm lever type | - | - | - | - | M20 | - | 1 Conduit Shape | - | - | Snap action (direct circuit opening operation included) | - | 2NC | - | - | 2NC (snap action) | Standard Type | ||
MYR 100.83 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 56 | 47 | 74.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | M20 | - | 2 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 143.51 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / C-UL / CE / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever type (resin lever, resin roller) | - | - | - | - | M12 connector | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 136.25 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | Standard | - | - | TUV / UL / CE / GB(CCC) / EN | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | Roller lever type (metal lever, resin roller) | - | - | - | - | M12 connector | - | 1 Conduit Shape | - | - | Snap action (direct circuit opening operation included) | - | 1NC/1NO | - | - | 1NC/1NO (snap action) | Standard Type | ||
MYR 149.13 | 1 Piece(s) | 5 Day(s) or more | Roller Lever Type (rotation) | Standard | Standard | - | Standard | - | - | UL / CE / GB(CCC) / CSA | - | - | - | - | - | - | - | 1500 | DC125V / DC250V / AC120/240V | 2.5 | - | - | - | - | Roller lever type (metal lever, metal roller) | - | - | - | - | M12 connector | - | 1 Conduit Shape | - | - | Snap action (direct circuit opening operation included) | - | 2NC | - | - | 2NC (snap action) | Standard Type |
Loading...
Basic Information
| Operating Temperature Range(°C) | -30::70 | Protection Structure | IP67 | Mechanical Operation Frequency(times/min or Less) | 30 |
|---|---|---|---|---|---|
| AC Rated Voltage | 120 / 240 | DC Rated Voltage | 125 / 250 |
Specification/Dimensions
-
Main Body Size
- Standard
- Small
-
Environment
- Standard
- Cold Resistance
-
Plunger Shape Type
- Top Plunger
- Roller Plungers
- Push Plunger
- Top Plunger
-
Roller Lever Shape Type
- Standard
- Fork Lever Lock
- Variable Roller Levers
-
Lever Shape Type
- Arm Lever
- Arm Lever
-
Rod Shape Type
- Spring + Metal Rod
- Spring + Resin Rod
- Spring + Metal Rod
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Mutual insulation double-throw
- 2-circuit Double-break
-
Contact Point Type
- Rivet
-
Rated Operating Voltage(V)
- DC125V
- DC250V
- AC100/125V
- AC120/240V
- AC240/250V
-
Rated Conductance Current(A)
-
Detector Element Details
- Adjustable roller lever type, form lock type (metal lever, resin roller)
- Adjustable roller lever type, form lock type (metal lever, rubber roller)
- Cat whisker type
- Fork lever lock type
- One-way action roller arm lever type
- Plunger type
- Resin Rods
- Roller lever type (metal lever, bearing roller)
- Roller lever type (metal lever, metal roller)
- Roller lever type (metal lever, resin roller)
- Roller lever type (resin lever, resin roller)
- Roller plunger type
-
Indicator Light
- AC/DC10 - 115V drive type (orange LED)
-
Movement After the Operation OT(mm)
-
Operating Position OP(mm)
- 18.2±0.5
- 27±0.8
- 28.2±0.8
- 34±0.5
- 37±0.8
- 44.4±0.8
- 53±0.8
-
Torque necessary for operation, OF(N·m)
- 0
-
Conduit Size
-
Specification of Terminal
-
Details Type
- 1-conduit type, general type
- 1-conduit type, pull-reset type
- 1 Conduit Shape
- 1 Conduit Shape 2 Contact Series
- 1 Conduit Shape 3 Contact, MBB Contact Series
- 2-conduit type, general type
- 2 Conduit Shape 2 Contact Series
- 2 Conduit Shape 3 Contact, MBB Contact Series
- Caster
-
O.D.
- φ6
- φ9.5×5
- φ12.5 × 5
- φ17×6
- φ17.5×6.8
- φ17.5×7
- φ50×8
-
Mounting System
-
Direction of Operation
-
Roller Type
- Resin roller R19
- Resin roller R20
- Metal lever / SUS sintered alloy roller R26
- Metal lever / bearing roller R26
- Metal lever / resin roller R26
- Resin lever / resin roller R26
- Metal lever / resin roller, foam lock type
- Metal lever / rubber roller, foam lock type
- Plastic rollers
- Resin roller, foam lock type
-
Contact format
- 1NC/1NO
- 1NC/1NOMBB
- 2NC
- 2NC/1NO
- 2NC/1NO+1NC/1NO
- 2NC/1NO+2NC
- 3NC
-
Release Key Type
- General type key (resin)
-
Lock / Release System
- DC24V solenoid lock / mechanical release scheme
- Mechanical lock / DC24V solenoid release
-
Built-in Switch Specification
- 1NC/1NO (MBB) (slow-action)
- 1NC/1NO (slow action)
- 1NC/1NO (snap action)
- 2NC (slow action)
- 2NC (snap action)
- 2NC/1NO (MBB) (slow action)
- 2NC/1NO (slow action)
- 3NC (slow action)
-
Specifications
- Pull reset type
- Standard Type
-
type
- D4N
- D4N-□R
-
Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Rod Shape
- Roller lever type
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
- 9 Day(s) or Less
- 35 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compact Heavy Equipment Limit Switch [D4A-□N]
- Small Limit Switch [D4CC]
- Small Limit Switch [D4C]
- Semi-Compact Sealed Switch [D4MC]
- General-Purpose Enclosed Switch [ZE/ZV/ZV2/XE/XV/XV2]
- Compact Insertion Switch
- Small Safety Door Switch / Slide Key Unit [D4NS/D4NS-SK]
- Microswitch, S-3-BE-SW Series
Customers Who Viewed This Item Also Viewed
-
![Two-Circuit Limit Switch [WL-N/WL]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559396_010.jpg?$product_recommend_b$)
-
![Small Limit Switch [D4CC]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559240.jpg?$product_recommend_b$)
-
![Safety Limit Switch [D4B-□N]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138091_1.jpg?$product_recommend_b$)
-
![General-purpose Basic Switch [Z]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559217_001.jpg?$product_recommend_b$)
-
![Small Limit Switch [D4C]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559251.jpg?$product_recommend_b$)
-
![Small Limit Switch [HL-5000]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559453_001.jpg?$product_recommend_b$)
-
![Semi-Compact Sealed Switch [D4MC]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559273.jpg?$product_recommend_b$)
-
![Small Enclosed Switch [D4E-□N]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559262.jpg?$product_recommend_b$)
-
![Small Safety Limit Switch [D4F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138035.jpg?$product_recommend_b$)
-
![Tactile Switch [D5B]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559295.jpg?$product_recommend_b$)
-
![Small Electromagnetic Lock Safety Door Switch [D4NL]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138080.jpg?$product_recommend_b$)
Small Electromagnetic Lock Safety Door Switch [D4NL]OMRON
Standard Price : MYR 528.80-
Days to Ship : 2 Day(s) or more
-
![Compact Enclosed Switch [SHL]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559341.jpg?$product_recommend_b$)
![Two-Circuit Limit Switch [WL-N/WL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559396_010.jpg?$product_recommend_b$)
![Small Limit Switch [D4CC]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559240.jpg?$product_recommend_b$)
![Safety Limit Switch [D4B-□N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138091_1.jpg?$product_recommend_b$)
![General-purpose Basic Switch [Z]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559217_001.jpg?$product_recommend_b$)
![Small Limit Switch [D4C]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559251.jpg?$product_recommend_b$)
![Small Limit Switch [HL-5000]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559453_001.jpg?$product_recommend_b$)
![Semi-Compact Sealed Switch [D4MC]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559273.jpg?$product_recommend_b$)
![Small Enclosed Switch [D4E-□N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559262.jpg?$product_recommend_b$)
![Small Safety Limit Switch [D4F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138035.jpg?$product_recommend_b$)
![Tactile Switch [D5B]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559295.jpg?$product_recommend_b$)
![Small Electromagnetic Lock Safety Door Switch [D4NL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138080.jpg?$product_recommend_b$)
![Compact Enclosed Switch [SHL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559341.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy