(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Small Limit Switch [D4C]
![Small Limit Switch [D4C]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559251.jpg?$product_main$)
Mainly standards with improved sealing properties
Part Number
Configured Part Number is shown.
Dimensional Drawing of OMRON Limit Switch
Model D4C-□□01 of Limit Switch
*For information on model numbers other than those listed above, please refer to the digital catalog.
Specification Table of OMRON Limit Switch
Performance of Limit Switch
| Protective structure of Limit Switch | IP67 | |
|---|---|---|
| Durability*1 | Mechanical*3 | Over 10 million times |
| Electrical*2 | 200,000 times or more (AC125V 5A resistive load) | |
| Allowable Operating Speed | 0.1mm to 0.5m/s (for plunger type) 1mm to 1m/s (for roller lever type) | |
| Allowable operating frequency | Mechanical | 120 times/min |
| Electrical | 30 times/min | |
| Rated Frequency | 50/60Hz | |
| Insulation resistance | 100MΩ or more (at DC500V mega) | |
| Contact resistance (initial value) | 250mΩ or less (with 2m cord) 300mΩ or less (with 3m cord) 400mΩ or less (with 5m cord) | |
| Withstand voltage | Between same-polarity terminals | AC1,000V 50/60Hz 1min |
| Between live metal parts and earth | AC1,500V 50/60Hz 1min Uimp 2.5kV (EN60947-5-1) | |
| Between each terminal and non-current-carrying metal parts | AC1,500V 50/60Hz 1min Uimp 2.5kV (EN60947-5-1) | |
| Rated insulation voltage (Ui) | 300V (EN60947-5-1) *5 | |
| Pollution level (usage environment) | 3 (EN60947-5-1) | |
| Short Circuit Protection Device | 10A fuse type gI or gG (IEC60269) | |
| Conditional Short Circuit Current | 100A (EN60947-5-1) | |
| Rated sealed thermal current (I the) | 5A, 4A, 0.5A (EN60947-5-1) | |
| Electric shock protection class | Class I (with earth wire)*6 | |
| vibration | malfunction | 10 to 55Hz, double amplitude 1.5mm *4 |
| Shock Resistant | Durability | Up to 1,000m/s2 |
| malfunction | Maximum 500m/s2* 4 | |
| Ambient temperature | -10 to +70℃ (but do not freeze) | |
| Ambient humidity | 35～95% RH | |
| Mass (for D4C-1202) | Approx. 360g (with VCTF3m) approx. 540g (with VCTF5m) | |
Note: The above values are initial values of Limit Switch.
*1. The durability values are for an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH, but the durability varies depending on the type of load and the magnitude of the current.
*2. Pre-wired type: 1 million operations or more. (DC specification, switching current 0.1A)
*3. Weather-resistant type: 500,000 operations or more.
*4. Plastic rod type excluded.
*5. Pre-wired type: 250V.
*6. Pre-wired type: class III
Structure of Limit Switch
| Part Number |
|---|
| D4C-0031 |
| D4C-1201 |
| D4C-1231 |
| D4C-1301 |
| D4C-1331 |
| D4C-1401 |
| D4C-1501 |
| D4C-1631 |
| D4C-3201 |
| D4C-3231 |
| D4C-3431 |
| D4C-3531 |
| D4C-4201 |
| D4C-6331 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Environment | Plunger Shape Type | Boot Seal | Roller Lever Shape Type | Rod Shape Type | Operating Temperature Range (°C) | Acquired Standards | Protection Structure | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Max. Stroke T.T (mm) | Max. Angle T.T (deg) | Contact Type | Mechanical Life (10,000 times) | Mechanical Operation Frequency (times/min or Less) | Rated Operating Voltage (V) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Lever Length R (mm) | Cable Specifications | Detector Element Details | Indicator Light | Movement After the Operation OT (mm) | Operating Position OP (mm) | Specification of Terminal | Cord / Cable Length (m) | Details Type | O.D. | Mounting System | Roller Type | Contact format | Wiring Specifications | AC Rated Voltage | DC Rated Voltage | AC Electrical Rating details | DC Electrical Rating details | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 150.28 | 1 Piece(s) | 5 Day(s) or more | - | Standard | Push Plunger | - | - | - | -10～70 | - | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Sealed pin plunger type | - | - | - | - | - | Head only parts set type (with actuator) | - | - | - | - | - | - | - | - | - | - | ||
MYR 178.94 | 1 Piece(s) | 2 Day(s) | Plunger Type | Standard | Push Plunger | No | - | - | -10～70 | TUV / CE / GB(CCC) / EN | IP67 | 11.77 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less / AC240/250V | 4 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Pin plunger type | No indicator light | 3 | 15.7 | Ground terminal (general load type) included | 3 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 186.73 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | Presence | - | - | -10～70 | TUV / CE / GB(CCC) / EN | IP67 | 17.65 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less / AC240/250V | 4 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Sealed pin plunger type | No indicator light | 3 | 24.9 | Ground terminal (general load type) included | 3 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 236.58 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | No | - | - | -10～70 | TUV / CE / GB(CCC) / EN | IP67 | 11.77 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less / AC240/250V | 4 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 5m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Pin plunger type | No indicator light | 3 | 15.7 | Ground terminal (general load type) included | 5 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 256.00 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | TUV / CE / GB(CCC) / EN | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Sealed pin plunger type | No indicator light | - | - | - | 5 | Standard type | - | - | - | - | VCTF oil resistance cord | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 169.48 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | GB(CCC) | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Pin plunger type | No indicator light | - | - | - | 3 | Standard type | - | - | - | - | VCTF | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 227.06 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | GB(CCC) | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Pin plunger type | No indicator light | - | - | - | 5 | Standard type | - | - | - | - | VCTF | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 232.00 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | Presence | - | - | -10～70 | UL / GB(CCC) / CSA | IP67 | 17.65 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less / AC240/250V | 4 | 40 | 17.4 | 49 | - | SJT(O)3m(0.75mm2 4 Core 7.6mm Finishing External Diameter) | Sealed pin plunger type | No indicator light | 3 | 24.9 | Ground terminal (general load type) included | 3 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | SJT (O) | 250 | 30 | 250 V AC (5 A) | 30 V DC (4 A) | - | ||
MYR 194.46 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | No | - | - | -10～70 | TUV / EN | IP67 | 11.77 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less | 4 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Pin plunger type | LED With indicator light | 3 | 15.7 | Ground terminal included | 3 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | - | 30 | - | 30 V DC (4 A) | - | ||
MYR 202.18 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | Presence | - | - | -10～70 | TUV / EN | IP67 | 17.65 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less | 4 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Sealed pin plunger type | LED With indicator light | 3 | 24.9 | Ground terminal included | 3 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | - | 30 | - | 30 V DC (4 A) | - | ||
MYR 239.41 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | - | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Sealed pin plunger type | LED With indicator light | - | - | - | 3 | Standard type | - | - | - | - | VCTF | - | 30 | - | 30 V DC (4 A) | - | ||
MYR 256.00 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | - | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Sealed pin plunger type | LED With indicator light | - | - | - | 5 | Standard type | - | - | - | - | VCTF | - | 30 | - | 30 V DC (4 A) | - | ||
MYR 222.93 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | - | - | - | -10～70 | TUV / CE / GB(CCC) / EN | IP67 | - | - | - | - | - | - | 1000 | 120 | - | - | - | - | - | - | - | Pin plunger type | No indicator light | - | - | - | 3 | Standard type | - | - | - | - | VCTF oil resistance cord | 125 | 30 | 125 V AC (0.1 A) | 30 V DC (0.1 A) | - | ||
MYR 229.22 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | Standard | Push Plunger | Presence | - | - | -10～70 | TUV / EN | IP67 | 17.65 | 1.8 | - | 4.8 | - | Single Pole Double Throw | 1000 | 120 | DC30V or Less | 0.1 | 40 | 17.4 | 49 | - | VCTF Oil Resistance Code 5m (0.75mm2 4 core Finished Outer Diameter 7.6mm) | Sealed pin plunger type | LED With indicator light | 3 | 24.9 | Ground terminal (micro-load type) included | 5 | Stainless Steel Plunger | φ10 | Front mounting | - | 1c | VCTF oil resistance cord | - | 30 | - | 30 V DC (0.1 A) | - |
Loading...
Basic Information
| Main Body Size | Small |
|---|
Specification/Dimensions
-
Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Rod Shape
- Roller lever type
-
Environment
- Standard
- Weather Resistance
-
Boot Seal
- No
- Presence
-
Roller Lever Shape Type
- Standard
- Variable Roller Levers
- Center Roller Lever
-
Rod Shape Type
- Spring + Resin Rod
- Spring + Resin Rod
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Single Pole Double Throw
-
Rated Operating Voltage(V)
- DC30V or Less
- AC100/125V
- AC120/240V
- AC240/250V
-
Rated Conductance Current(A)
-
Cable Specifications
- SJT(O)3m(0.75mm2 4 Core 7.6mm Finishing External Diameter)
- VCTF3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- VCTF Oil Resistance Code 3m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- SJT(O)5m(0.75mm2 4 Core 7.6mm Finishing External Diameter)
- VCTF5m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
- VCTF Oil Resistance Code 5m (0.75mm2 4 core Finished Outer Diameter 7.6mm)
-
Detector Element Details
- Center roller lever type
- Cross roller plunger type
- Pin plunger type
- Plastic rod type
- Roller lever type
- Roller lever type (high sensitivity type)
- Roller plunger type
- Sealed cross roller type
- Sealed pin plunger type
- Sealed roller plunger type
- Variable rod lever type
- Variable roller lever type
-
Indicator Light
- LED With indicator light
- No indicator light
-
Movement After the Operation OT(mm)
-
Operating Position OP(mm)
- 15.7
- 24.9
- 28.5
- 28.5±1
- 34.3
- 36.8±1
-
Specification of Terminal
-
Cord / Cable Length(m)
- 0.3
- 2
- 3
- 5
-
Details Type
- Head only parts set type (with actuator)
- Head single unit (roller / plunger type with actuator)
- Nylon rod
- Pre-wired type
- Stainless Steel Lever
- Stainless Steel Plunger
- Standard type
- Weather resistance type
-
O.D.
- φ3 × 160
- φ3.2
- φ10
- φ12×4.4
- φ12×5
- φ17.5×7
- Stainless steel
-
Mounting System
-
Roller Type
- Stainless Steel Roller
- Stainless steel-based sintered roller
-
Contact format
- 1c
-
Wiring Specifications
- ASI device compatible connector type (2 cores: no wiring)
- Pre-wired type (3 cores: DC specification)
- SJT (O)
- VCTF
- VCTF oil resistance cord
-
AC Rated Voltage
-
DC Rated Voltage
-
AC Electrical Rating details
- 125 V AC (0.1 A)
- 125 V AC (5 A)
- 250 V AC (5 A)
-
DC Electrical Rating details
- 30 V DC (0.1 A)
- 30 V DC (1 A)
- 30 V DC (4 A)
-
type
- D4C
-
Plunger Shape Type
- Roller Plungers
- Push Plunger
- Roller Plungers
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 5 Day(s) or Less
- 7 Day(s) or Less
- 9 Day(s) or Less
- 65 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compact Heavy Equipment Limit Switch [D4A-□N]
- Semi-Compact Sealed Switch [D4MC]
- Flexible Rod Switch [TP70]
- Multi-Pull Limit Switch [VB]
- Two-Circuit Limit Switch [WL-N/WL]
- General-Purpose Enclosed Switch [ZE/ZV/ZV2/XE/XV/XV2]
- Slim Type Safety / Door Switch [D4GS-N]
- Small Safety Limit Switch [D4N]
Customers Who Viewed This Item Also Viewed
![Small Limit Switch [D4CC]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559240.jpg?$product_recommend_b$)
![Two-Circuit Limit Switch [WL-N/WL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559396_010.jpg?$product_recommend_b$)
![Small Limit Switch [HL-5000]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559453_001.jpg?$product_recommend_b$)
![Compact Sealed Switch [ZC-□55]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559419_001.jpg?$product_recommend_b$)
![Small Safety Limit Switch [D4N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138046_004.jpg?$product_recommend_b$)
![Small Safety Limit Switch [D4F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138035.jpg?$product_recommend_b$)
![Tactile Switch [D5B]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559295.jpg?$product_recommend_b$)
![General-purpose Basic Switch [Z]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559217_001.jpg?$product_recommend_b$)
![Safety Limit Switch [D4B-□N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138091_1.jpg?$product_recommend_b$)
![Compact Enclosed Switch [SHL]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559341.jpg?$product_recommend_b$)
![Semi-Compact Sealed Switch [D4MC]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559273.jpg?$product_recommend_b$)
![Small Enclosed Switch [D4E-□N]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559262.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy