(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Miniature Basic Switch [VX]
![Miniature Basic Switch [VX]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559105_1.jpg?$product_main$)
To detect light weight objects
[Features]
· Independent internal mechanism assures the high contact power even in load operation.
· It can be used in applications such as detection of light weight objects
Part Number
Configured Part Number is shown.
Dimensional Drawing of OMRON Micro Switches
Note 1. The dimensional tolerance of the parts not specified in the above external dimensions is ±0.4 mm.
Note 2. The operating characteristics are for operation in the A direction (↓).
Specification Table of OMRON Micro Switches
OMRON Micro Switches Performance
| Micro Switches item | Micro Switches Model number | ||
|---|---|---|---|
| Model VX-5 series | Model VX-01 series | ||
| Allowable Operating Speed | 0.1mm to 1m/s (for pin push button type) | ||
| Allowable operating frequency | Mechanical | 600 times/min (for pin push button type) | |
| Electrical | 60 times/min | ||
| Insulation resistance | 100MΩ or more (DC500V insulation resistance tester) | ||
| Contact resistance (initial value) | 30mΩ or less | 50mΩ or less | |
| Withstand voltage*1 | Between same-polarity terminals | AC1,000V 50/60Hz 1min | |
| Between live metal parts and earth | AC1,500V 50/60Hz 1min | ||
| Between each terminal and non-current-carrying metal parts | AC1,500V 50/60Hz 1min | ||
| Vibration*2 | malfunction | Frequency: 10 to 55 Hz, Double amplitude: 1.5 mm | |
| Impact*2 | Durability | Up to 400m/s2 | |
| malfunction | Maximum 100m/s2 | ||
| Durability | Mechanical | Over 50 million times (60 times/min) | Over 10 million times (60 times/min) |
| Micro Switches Electrical | Over 500,000 times (30 times/min) | Over 1 million times (30 times/min) | |
| Protective structure | IEC IP40 | ||
| Electric shock protection class | Class I | ||
| PTI (Tracking Characteristics) | 175 | ||
| Operating temperature range | -25 to +105°C, 60% RH or less (but no freezing or condensation) | ||
| Operating humidity range | 85% RH or less (at +5 to +35°C) | ||
| mass | Approx. 6.2g (pin push button type) | ||
Note: The above values are initial values.
*1. The withstand voltage is the value when a separator (see "Common Accessories for Microswitches") is used.
*2. The value is for the free position and full travel position for Micro Switches type, and for the full travel position for lever type. The contacts make or break within 1 ms.
Specification of OMRON Micro Switches
OMRON Micro Switches Operating Characteristics
| Micro Switches Actuator | Micro Switches format | Operating characteristics | |||||
|---|---|---|---|---|---|---|---|
| Force required for operation | The power of return | Movement up to operation | Movement after action | Differential movement | Operating position | ||
| OF Max | RF Min | PT Max | OT Min | MD Max | OP | ||
| Micro Switches type | Model VX-5-1□2 Model VX-01-1□2 | 025N | 0.03N | 1.2mm | 1.0mm | 0.3mm | 14.7±0.4mm |
| Model VX-5-1□3 Model VX-01-1□3 | 0.49N | 0.05N | |||||
| Hinge/ short lever type (standard position) | Model VX-51-1□3 Model VX-011-1□3 | 0.49N | 0.04N (reference value) | 1.6mm | 0.8mm | 0.5mm | 15.2±0.5mm |
| Hinge lever type (standard position) | Model VX-52-1□3 Model VX-012-1□3 | 0.29N | - | 4.0mm | 1.6mm | 0.8mm | 15.2±1.2mm |
| Hinge/ Long lever type (standard position) | Model VX-53-1□3 Model VX-013-1□3 | 0.20N | - | 9.0mm | 3.2mm | 2.0mm | 15.2±2.6mm |
| Hinge/ Long lever type (K position) | Model VX-53K-1□3 Model VX-013K-1□3 | 0.12N | - | 15.0mm | 5.0mm | 4.2mm | 15.2±4.4mm |
| Hinge roller lever type (standard position) | Micro Switches Model VX-54-1□3 Micro Switches Model VX-014-1□3 | 0.29N | 0.02N | 4.0mm | 1.6mm | 0.8mm | 18.7±1.2mm |
| Hinge roller lever type (K position) | Model VX-54K-1□3 Model VX-014K-1□3 | 0.18N | (0.01N) | 7.2mm | 2.5mm | 2.0mm | 18.7±2.2mm |
| Hinge roller short lever type (standard position) | Model VX-55-1□3 Model VX-015-1□3 | 0.59N | 0.04N (reference value) | 1.6mm | 0.8mm | 0.5mm | 20.7±0.6mm |
| Hinge roller lever type (standard position) | Model VX-56-1□3 Model VX-016-1□3 | 0.29N | - | 4.0mm | 1.6mm | 0.8mm | 20.7±1.2mm |
| Hinge roller lever type (K position) | Model VX-56K-1□3 Model VX-016K-1□3 | 0.18N | (0.01N) | 7.2mm | 2.5mm | 2.0mm | 20.7±2.2mm |
Note 1. The RF reference value is the value when the lever is installed in a direction that does not apply weight to the Micro Switches.
Note 2. The operating characteristics are when it operates in the A direction (↓).
Model designation method of OMRON Micro Switches
OMRON Micro Switches Format Standards
OMRON Micro Switches Contact Specifications
OMRON Micro Switches Type/Shape
Note: The above is for contact specifications 1c.
Technical Information of OMRON Micro Switches
OMRON Micro Switches Rating
OMRON Micro Switches Contact Specifications
| Micro Switches format | Micro Switches Rated voltage | Micro Switches item |
|---|---|---|
| Resistive Load | ||
| Micro Switches Model VX-5 series | AC250V | 5A |
| Micro Switches Model VX-01 series | AC125V | 0.1A |
| DC 30V | 0.1A |
| Micro Switches item | Micro Switches format | ||
|---|---|---|---|
| Model VX-5 series | Model VX-01 series | ||
| contact | specification | rivet | Crossbar |
| Micro Switches Material | Silver Alloy | Gold alloy | |
| Interval (standard value) | 0.5mm | ||
| Inrush current | Normally closed | Maximum 15A | - |
| Normally open | Maximum 15A | - | |
| Minimum applicable load (reference value)* | DC5V 160mA | DC5V 1mA | |
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5% RH
(3) Operation frequency: 30 times/min.
please refer to "●Using with Micro Switches" in "■Please Use Properly".
How to Use of OMRON Micro Switches
OMRON Micro Switches Mounting Hole Dimensions
OMRON Micro Switches Usage Notes
Micro Switches Regarding installation
The Micro Switches Use M3 screws for mounting and securely attach using flat washers, spring washers, etc. The tightening torque should be 0.39 to 0.59 N m.
Mounting direction
Regarding the actuator specifications, please install the actuator in a direction that does not apply its own weight to the Micro Switches.
This is a low Micro Switches and has a small return force, which may cause a return failure.
Regarding use with Micro Switches
Using a general-purpose switch when switching a Micro Switches circuit can cause poor contact. We recommend using the switch within the range of use, referring to the diagram below. Even if a microload type is used within the area shown inthe diagram below, if the load generates an inrush current when Micro Switches, contact wear will be rapid and durability will decrease, so insert a contact protection circuit as necessary. The minimum applicable load is the N-levelreference value. This represents the failure level at a confidence level of 60% (λ60
). (JIS C5003)
λ60 = 0.5×10-6/times means that at a confidence level of 60%, failure is estimated to occur less than 1/2,000,000 times.
Cautions and Prohibitions of OMRON Micro Switches
OMRON Micro Switches Safety Precautions
Micro Switches Handling
Do not subject the switch to strong shocks, as this is a low Micro Switches and may cause damage to the internal mechanism.
Regarding soldering
- As a guideline, the soldering time for connecting to the soldering terminals should be less than 5 seconds with a soldering iron of 60W (tip temperature +250 to +350°C), and no external force should be applied for 1 minute after soldering
. Use the minimum amount of flux possible. If flux gets inside the Micro Switches, it may cause contact failure. - Micro Switches Connection to #187 tab terminals
: Use a #187 tab receptacle and insert it straight into the terminal.
Applying excessive external force to the side or top/bottom of the terminal may cause deformation of the terminal and damage to the housing.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Rated Operating Voltage (V) | Lever Shape Type | DC Rated Operating Voltage (V) | Plunger Shape Type | Motion to Switching P.T. (mm) | Contact Type | Contact Point Type | Contact Material | Mechanical Life (10,000 times) | Rated Conductance Current (A) | Current Type | Actuator type | Specification of Terminal | Lever mounting position | Contact structure/specification | Mounting Format | Required Force for Push Side, O.F. (detailed numerical values) (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 13.42 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | - | 30 | Top Plunger | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Plunger type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.25N | ||
MYR 13.42 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | - | 30 | Top Plunger | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Plunger type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 11.76 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | - | - | 30 | Top Plunger | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Plunger type | #187 tab terminal | Lever set distant from plunger (Standard Position) | 1c (double throw) | Position farther from the button (standard position) | 0.25N | ||
MYR 13.42 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | - | 30 | Top Plunger | 1.2 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Plunger type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.21 | 1 Piece(s) | 2 Day(s) | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 13.59 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | #187 tab terminal | Lever set distant from plunger (Standard Position) | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.21 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 9 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.21 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 9 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.21 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.21 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | [Hinge Lever] Hinge Lever | 30 | - | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 12.87 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | 30 | - | 4 | Single Pole Normally Open | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Lever set distant from plunger (Standard Position) | 1a (normally open) | Position farther from the button (standard position) | 0.49N | ||
MYR 18.36 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 18.36 | 1 Piece(s) | 2 Day(s) | Lever Shape (push) | 125 | [Hinge Lever] Hinge Lever | 30 | - | 1.6 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 18.36 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 | [Hinge Lever] Hinge Lever | 30 | Top Plunger | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 18.36 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 125 | [Hinge Lever] Hinge Lever | 30 | - | 4 | Single Pole Double Throw | [Crossbar] Crossbar | Gold alloy | 1000 | 0.1 | AC/DC | Lever type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 11.99 | 1 Piece(s) | 2 Day(s) | Plunger Type | 250 | - | - | Top Plunger | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Plunger type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.25N | ||
MYR 11.99 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 | - | - | Top Plunger | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Plunger type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 11.99 | 1 Piece(s) | 2 Day(s) | Plunger Type | 250 | - | - | Top Plunger | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Plunger type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.25N | ||
MYR 14.07 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 14.07 | 1 Piece(s) | 2 Day(s) | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 4 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 14.07 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 9 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 14.07 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 9 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | #187 tab terminal | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 14.07 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 4 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 12.44 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 4 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | #187 tab terminal | Lever set distant from plunger (Standard Position) | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 12.44 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 4 | Single Pole Normally Open | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | #187 tab terminal | Lever set distant from plunger (Standard Position) | 1a (normally open) | Position farther from the button (standard position) | 0.49N | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 15.23 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | #187 tab terminal | Lever set distant from plunger (Standard Position) | 1c (double throw) | Position farther from the button (standard position) | 0.49N | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) | Lever Shape (push) | 250 | [Hinge Lever] Hinge Lever | - | - | 4 | Single Pole Double Throw | Rivet | Silver alloy | 5000 | 5 | AC | Lever type | Terminals with solder | Push button placed in position far from standard | 1c (double throw) | Position farther from the button (standard position) | 0.49N |
Loading...
Basic Information
| Operating Temperature Range(℃) | -25::105 | Acquired Standards | UL / CSA / EN | Protection Structure | IEC IP40 |
|---|---|---|---|---|---|
| Body Material | Thermoplastic | Force Required for Push Side O.F.(N) | ~1 | Mechanical Operation Frequency(times/min or Less) | 600 |
| Main Body External Dimension, Width W(mm) | 10.3 | Main Body External Dimension, Height H(mm) | 15.9 | Main Body External Dimension, Length L(mm) | 27.8 |
Specification/Dimensions
-
Detector Shape
- Plunger Type
- Lever Shape (push)
-
Rated Operating Voltage(V)
- 125
- 250
-
Lever Shape Type
- Hinge Lever
- Hinge Lever
-
DC Rated Operating Voltage(V)
- 30
-
Plunger Shape Type
- Top Plunger
-
Contact Type
- Single Pole Double Throw
- Single Pole Normally Open
-
Contact Point Type
- Rivet
- Crossbar
-
Contact Material
- Silver alloy
- Gold alloy
-
Rated Conductance Current(A)
-
Current Type
- AC
- AC/DC
-
Actuator type
- Lever type
- Plunger type
-
Specification of Terminal
-
Lever mounting position
- Lever set close to plunger (Position K)
- Lever set distant from plunger (Standard Position)
- Push button placed in position far from standard
-
Contact structure/specification
-
Mounting Format
- Position closer to the button (K position)
- Position farther from the button (standard position)
-
Required Force for Push Side, O.F. (detailed numerical values)(N)
- 0.25N
- 0.29N
- 0.49N
-
type
- VX
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Ultra-Small Basic Switch [D3M]
- Ultra Small Basic Switch [SS]
- High Capacity Basic Switch [A]
- Magnetic Blowout Basic Switch Type X
- Magnetic Blowout Basic Switch [X]
- Small Door Switch [D3D]
- Small Non-Contact Door Switch [D40A]
- Sealed Subminiature Basic Switch [D2QW]
Customers Who Viewed This Item Also Viewed
-
![Small Basic Switch [V]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559093_001.jpg?$product_recommend_b$)
-
![General-purpose Basic Switch [Z]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559217_001.jpg?$product_recommend_b$)
-
![Ultra Small Basic Switch [SS]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
-
![Small Basic Switch [D2MV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
-
![Sealed Type Small-Sized Basic Switch [D2VW]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138147_1.jpg?$product_recommend_b$)
Sealed Type Small-Sized Basic Switch [D2VW]OMRON
Standard Price : MYR 16.36-
Days to Ship : 2 Day(s) or more
-
![Ultra-Small Basic Switch [D2F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
-
![Small Basic Switch [D2RV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
-
![Ultra-Small Basic Switch [D3M]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559127_001.jpg?$product_recommend_b$)
-
-
![Small Door Switch [D3D]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138204.jpg?$product_recommend_b$)
-
![Sealed Ultra Subminiature Basic Switch [D2HW]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
Sealed Ultra Subminiature Basic Switch [D2HW]OMRON
Standard Price : MYR 8.11-
Days to Ship : 1 Day(s) or more
-
![Double Pole Double Throw Basic Switch [DZ]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559183.jpg?$product_recommend_b$)
Double Pole Double Throw Basic Switch [DZ]OMRON
Standard Price : MYR 81.09-
Days to Ship : 2 Day(s) or more
![Small Basic Switch [V]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559093_001.jpg?$product_recommend_b$)
![General-purpose Basic Switch [Z]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559217_001.jpg?$product_recommend_b$)
![Ultra Small Basic Switch [SS]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
![Small Basic Switch [D2MV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
![Sealed Type Small-Sized Basic Switch [D2VW]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138147_1.jpg?$product_recommend_b$)
![Ultra-Small Basic Switch [D2F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
![Small Basic Switch [D2RV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
![Ultra-Small Basic Switch [D3M]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559127_001.jpg?$product_recommend_b$)
![Small Door Switch [D3D]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138204.jpg?$product_recommend_b$)
![Sealed Ultra Subminiature Basic Switch [D2HW]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
![Double Pole Double Throw Basic Switch [DZ]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559183.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy