(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
[Features]
· Fluorine resin coding proximity sensor for sputter guard.
· Outstanding sputter resistance.
· Added series of long range type
· Maximum detection range 15 mm.
· Stock up on smart click type connector relay.
Part Number
Configured Part Number is shown.
Long distance Proximity Sensors type

Proximity Sensors Standard Type

Proximity Sensors Long distance type

Proximity Sensors Standard Type

Long distance type
| Proximity Sensors item | Proximity Sensors format | |||
|---|---|---|---|---|
| Model E2EQ-X4X1 Model E2EQ-X4X1-M1(T)J | Model E2EQ-X8X1 Model E2EQ-X8X1-M1(T)J | Model E2EQ-X15X1 Model E2EQ-X15X1-M1(T)J | ||
| Detection distance | 4mm±10% | 8mm±10% | 15mm±10% | |
| Set distance*1 | 0 to 3.2 mm | 0 to 6.4 mm | 0 to 12 mm | |
| Hysteresis | 15% or less of detection distance | |||
| Standard detection object | Iron 12 x 12 x 1 mm | Iron 18 x 18 x 1 mm | Iron 30×30×1mm | |
| Response frequency*2 | 1kHz | 0.5kHz | 0.25kHz | |
| Control Output | Opening and closing capacity | 3 to 100mA | ||
| Residual voltage*3 | 5V or less (load current 100mA, cord length 2m) | |||
| Operation mode (when detecting object approaching) | For details, refer to the "Input/Output Stage Circuit Diagram" time chart → page 5 of the digital catalog | |||
| Protection Circuit | Surge absorption, load short circuit protection | |||
| Ambient Temperature Range | Operating: -25 to +70°C, Storage: -40 to +85°C (but do not freeze or condense) | |||
| Temperature effects | Within ±15% of detection distance at +23°C in a temperature range of -40 to +85°C Within ±10% of detection distance at +23°C in a temperature range of -25 to +70°C | Within ±15% of detection distance at +23°C within the temperature range of -25 to +70°C | ||
| Voltage effect | Within ±1% of measurement distance at rated power supply voltage within ±15% of rated power supply voltage | |||
| Impact (durability) | 1,000m/s2 10 times each in X, Y, and Z directions | |||
| Proximity Sensors Connection method | Pre-wired type (standard cord length 2m), connector relay type | |||
| Weight (packaged) | Cord pull-out type | Approx. 65g | Approx. 140g | Approx. 190g |
| Connector relay type | Approx. 20g | Approx. 40g | Approx. 90g | |
*1.Please use within the range where the green indicator light is on.
*2.The Proximity Sensors response frequency is the average value.
*3.The residual voltage is 5V, so please check the interface conditions with the connected device before use.
Proximity Sensors Standard Type
| Proximity Sensors item | Proximity Sensors format | |||
|---|---|---|---|---|
| Model E2EQ-X3D1 Model E2EQ-X3D1-M1(T)GJ | Model E2EQ-X7D1 Model E2EQ-X7D1-M1(T)GJ | Model E2EQ-X10D1 Model E2EQ-X10D1-M1(T)GJ | ||
| Detection distance | 3mm±10% | 7mm±10% | 10mm±10% | |
| Set distance | 0 to 2.4 mm | 0 to 5.6 mm | 0 to 8 mm | |
| Hysteresis | 10% or less of the detection distance | |||
| Standard detection object | Iron 12 x 12 x 1 mm | Iron 18 x 18 x 1 mm | Iron 30×30×1mm | |
| Response Frequency* | 1kHz | 500Hz | 400Hz | |
| Proximity Sensors Control Output | Opening and closing capacity | 3 to 100mA | ||
| Residual voltage | 3V or less (load current 100mA, cord length 2m) | |||
| Operation mode (when detecting object approaching) | For details, refer to the "Input/Output Stage Circuit Diagram" time chart → page 5 of the digital catalog | |||
| Protection Circuit | Load short circuit protection, surge absorption | |||
| Ambient Temperature Range | During operation and storage: -25 to +70°C (but do not freeze or fog) | |||
| Temperature effects | Within the temperature range of -25 to +70°C, at +23°C, detection distance is within ±10% | |||
| Voltage effect | Within the range of rated power supply voltage ±15%, at rated power supply voltage, ±2.5% or less of detection distance | |||
| Impact (durability) | 1,000m/s2 10 times each in X, Y, and Z directions | |||
| Proximity Sensors Connection method | E2EQ-X□D1 type: Pre-wired type (standard cord length: 2 m) E2EQ-X□D1-M1GJ type: In-line connector type (standard cord length: 300 mm) | |||
| Weight (packaged) | Cord pull-out type | Approx. 120g | Approx. 160g | Approx. 220g |
| Proximity Sensors Connector relay type | Approx. 80g | Approx. 110g | Approx. 190g | |
*The response frequency is an average value.
Measurement conditions are: The Proximity Sensors standard detection object is used, the interval between detection objects is twice that of the standard detection object, and the set distance is 1/2 the detection distance.
Proximity Sensors common
| Proximity Sensors item | Proximity Sensors format | |||
|---|---|---|---|---|
| Model E2EQ-X4X1 Model E2EQ-X4X1-M1(T)J Model E2EQ-X3D1 Model E2EQ-X3D1-M1(T)GJ | Model E2EQ-X8X1 Model E2EQ-X8X1-M1(T)J Model E2EQ-X7D1 Model E2EQ-X7D1-M1(T)GJ | Model E2EQ-X15X1 Model E2EQ-X15X1-M1(T)J Model E2EQ-X10D1 Model E2EQ-X10D1-M1(T)GJ | ||
| Detectable Objects | Magnetic metals (The detection distance decreases for non-magnetic metals. See page 4 of the digital catalog for "Characteristics Data") | |||
| Power supply voltage (operating voltage range) | DC12-24V ripple (pp) 10% or less (DC10-30V) | |||
| Leakage current | 0.8mA or less | |||
| Indicator Light | Operation indicator (red), setting indicator (green) | |||
| Ambient Humidity Range | During operation and storage: 35 to 95% RH (but no condensation) | |||
| Insulation resistance | 50MΩ or more (DC500V megger) between live parts and case | |||
| Withstand voltage | AC1,000V 1min Between live parts and case | |||
| Vibration (durability) | 10 to 55Hz, double amplitude 1.5mm, 2h each in X, Y, and Z directions | |||
| Protective structure | IEC standard IP67, Omron in-house standard oil resistance | |||
| Proximity Sensors Material | case | Fluorine resin coating (base material: brass) | ||
| Detection surface | Fluorine resin | |||
| Clamping Nut | Fluorine resin coating (base material: brass) | |||
| Toothed washer | Iron Zinc plating | |||
| accessories | operating instructions | |||
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detection Distance L1 (Classification) (mm) | Screw Detection Head Size | Operating Environment | Head Size Depth (range) (mm) | Head Size Depth (mm) | Types | Power Type | Output Mode | Operation Mode | Connection Method | Cable Length (m) | Different Frequency Type | Cable Specifications | Detection distance L1 details (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 894.25 | 1 Piece(s) | 55 Day(s) or more | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement | 30.1~40 | 33 | Anti-spatter type (IO-Link series) COM3: 230.4 kbps | Direct Current 3-Wire Type | Direct current 3-wire type PNP | PNP NO / NC Switchable | M12 smart click inline connector type | 0.3 | - | Vinyl (PVC) insulated round cord (flame retardant), φ4 | 3 | ||
MYR 566.00 | 1 Piece(s) | 2 Day(s) | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 24 | Spatter-resistant standard type | Direct Current 2-Wire Type | DC 2-wire connection | NO | For pre-wired type | 2 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core | 3 | ||
MYR 633.16 | 1 Piece(s) | 5 Day(s) or more | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 24 | Spatter-resistant standard type | Direct Current 2-Wire Type | DC 2-wire connection | NO | For pre-wired type | 5 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core | 3 | ||
MYR 611.00 | 1 Piece(s) | 5 Day(s) or more | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 24 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | Inline connector type (M12) | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 3 | ||
MYR 540.53 | 1 Piece(s) | 5 Day(s) or more | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 24 | Anti-spatter long-distance type | Direct Current 2-Wire Type | DC 2-wire connection | NO | Inline connector type (M12) | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 3 | ||
MYR 542.64 | 1 Piece(s) | 5 Day(s) or more | ~5 | M12 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 24 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | M12 smart click inline connector type | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 3 | ||
MYR 944.83 | 1 Piece(s) | 55 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement | 30.1~40 | 38 | Anti-spatter type (IO-Link series) COM3: 230.4 kbps | Direct Current 3-Wire Type | Direct current 3-wire type PNP | PNP NO / NC Switchable | M12 smart click inline connector type | 0.3 | - | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 7 | ||
MYR 514.97 | 1 Piece(s) | 5 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 29 | Spatter-resistant standard type | Direct Current 2-Wire Type | DC 2-wire connection | NO | For pre-wired type | 2 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core | 7 | ||
MYR 670.33 | 1 Piece(s) | 5 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 29 | Spatter-resistant standard type | Direct Current 2-Wire Type | DC 2-wire connection | NO | For pre-wired type | 5 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core | 7 | ||
MYR 568.20 | 1 Piece(s) | 5 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 29 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | Inline connector type (M12) | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 7 | ||
MYR 568.20 | 1 Piece(s) | 5 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 29 | Anti-spatter long-distance type | Direct Current 2-Wire Type | DC 2-wire non-polar, ③-④ pin arrangement | NO | Inline connector type (M12) | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 7 | ||
MYR 569.75 | 1 Piece(s) | 5 Day(s) or more | - | M18 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 29 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | M12 smart click inline connector type | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 7 | ||
MYR 1,046.63 | 1 Piece(s) | 55 Day(s) or more | - | M30 | Standard / Sputtering Resistance / Oil Resistance Reinforcement | 40.1~50 | 43 | Anti-spatter type (IO-Link series) COM3: 230.4 kbps | Direct Current 3-Wire Type | Direct current 3-wire type PNP | PNP NO / NC Switchable | M12 smart click inline connector type | 0.3 | - | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 10 | ||
MYR 577.95 | 1 Piece(s) | 5 Day(s) or more | - | M30 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38 | Spatter-resistant standard type | Direct Current 2-Wire Type | DC 2-wire connection | NO | For pre-wired type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core | 10 | ||
MYR 635.40 | 1 Piece(s) | 5 Day(s) or more | - | M30 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | Inline connector type (M12) | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 10 | ||
MYR 635.48 | 1 Piece(s) | 5 Day(s) or more | - | M30 | Standard / Sputtering Resistance / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38 | Spatter-resistant standard type | Direct Current 2-Wire Type | Direct current 2-wire type (1) - (4) pin configuration | NO | M12 smart click inline connector type | 0.3 | Standard | Vinyl (PVC) insulated round cord (flame retardant), φ6 | 10 |
Loading...
| Shape | Screw Type | Shielded / Non-shielded | Shield Type | Amplifier | Amplifier Built-in Type |
|---|---|---|---|---|---|
| Protection Structure (IEC) | IP67 | Detected Objects | Magnetic Metal | Detection Direction | Front Surface |
| Case Material | Fluorine Resin Coating (Base Material: Brass) | Detecting Surface Material | Fluororesin | Acquired Standards | CE / IEC |
| Power Supply Voltage | DC12~24V |
![Long Distance Proximity Sensor [E2EM]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000398993_001.jpg?$product_recommend_b$)
![Long Size Proximity Sensor [E2E2]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2E2_DS_J_1_1.jpg?$product_recommend_b$)
OMRON
Standard Price : MYR 416.61-
Days to Ship : 5 Day(s) or more
![All Metal & Long Range Type Proximity Sensor [E2V]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/E2V-X_photo.jpg?$product_recommend_b$)
OMRON
Standard Price : MYR 545.13-
Days to Ship : 2 Day(s) or more
![All Stainless Steel Body Proximity Sensor [E2FM]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2FM_DS_J_1_1.jpg?$product_recommend_b$)
OMRON
Standard Price : MYR 767.02-
Days to Ship : 2 Day(s) or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy