(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Mini Quick Fitting, TSK Series Cartridge【1-10 Pieces Per Package】
Available in various shapes and sizes including small, medium and jumbo sizes. Speedy single-touch connection.
(i)Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Japanese Only
Part Number
Configured Part Number is shown.
Drawing
Dimensions
Product Specifications
External appearance
| Items | Compatible tube size | |
|---|---|---|
| ⌀1.8, ⌀3 | ⌀4, ⌀6, ⌀8, ⌀10, ⌀12, ⌀16 | |
| Operating fluid | Air | |
| Maximum operating pressure | 0.9 MPa | |
| Operating vacuum pressure | -100 kPa | |
| Operating temperature range | 0 to +60°C | |
| Recommended tube^Note | Urethane tube | Urethane tube, nylon tube |
Notes: with gasket or seal scraper.
Cautions: The tube with outer diameter accuracy within ±0.1 mm of the nominal size should be used.
Internal structure and main materials
Tube stop, Resin body, Metal body, Lock teeth, Collet, Tube, Guide ring, Elastic sleeve, O-ring, Thread sealant applied
For ø1.8 (1.8 mm diameter)
Tube stop, Resin body, Metal body, Free-cutting steel, Lock teeth, Collet, Tube, Guide link, Elastic sleeve, O-ring, Gasket
Standard table
| Part number | Tube outer diameter ⌀D | M | A | B | L | C | Width across flats H | ⌀P | Effective cross-sectional area (mm^2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| TSK3-M6M | 3 | M6 × 0.75 | 3 | 14 | 11 | 10.9 | 2 | 8 | 2.9 | 2.7 |
| TSK4-M6M | 4 | M6 × 0.75 | 3 | 14 | 11 | 10.4 | 2.5 | 8 | 5.1 | 2.6 |
| TSK4-M8M | M8 × 0.75 | 3.4 | 10.6 | 3 | 10 | 7.3 | 4.9 | |||
| TSK6-M8M | 6 | M8 × 0.75 | 3.4 | 14.8 | 11.4 | 11.7 | 4 | 10 | 12.8 | 3.6 |
Selection support information
Order Code
Development story
It has been several decades since its release, and it is reliable and has a proven track record.
It is used in a wide range of industries.
| Part Number |
|---|
| TSK4-M6M |
| TSK4-M8M |
| TSK6-M8M |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | Applicable Tube O.D.1 (φ) | Nominal of Thread M |
|---|---|---|---|---|---|---|---|
MYR 68.55 | 10 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | 4 | M6×0.75 | ||
MYR 134.18 | 10 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | 4 | M8×0.75 | ||
MYR 9.66 | 1 Piece(s) | 4 Day(s) or more | 6 | M8×0.75 |
Loading...
Basic Information
| Fitting Type | Screw Mount Direction | Applicable Fluid | Air | Screw Mounting, Direction | With hex socket and straight |
|---|---|---|---|---|---|
| Body Material | Standard (PBT) | Types | One-Touch Couplings | Thread Material | Standard (Brass) |
| Application | Standard Mini | Seal Material | Standard (NBR) | Operating Temperature(°C) | 0::60 |
| Main Body Color | Black | NCU Specifications | No | No oil specification | No |
| Recommended Tube | Nylon Tube, Urethane Foam Tube |
- [Information on the order unit quantity]Orders should be placed in units of 10 pieces.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the screw tightening torque?
- Answer: The recommended tightening torque is M3: 0.7 N⋅m and M5: 1.5 to 1.9 N⋅m.
- Question: Why does the tube come out of the fitting even though the diameter is correct?
- Answer: If the tube is cut at the right angle or slanted angle, it may not fully latch onto the joint tab and may come out under pressure. Moreover, please confirm that there are no scratches on the outer diameter part and that the tube is fully inserted into the end.
Additional Products in this Category
- New Joint GWFY □-0 Series
- PushOne E Series 45 Degree Elbow
- Union (Tee/fluororesin)
- Adapter 10-KQ2N (Sealant) One-Touch Fitting
- Push-in T-connector, CRQST Series
- Push-in L-fitting, CRQSL Series
- Push-in T-connector, NPQP-T Series
- Push-in L-fitting, NPQP-LQ Series
Customers Who Viewed This Item Also Viewed
-
Quick Coupling, Mini-Type TSH Hexagonal Socket Head StraightKOGANEI
Standard Price : MYR 9.37-
Days to Ship : 2 Day(s) or more
-
For General Piping, Mini-Type Tube Fitting, CartridgePISCO
Standard Price : MYR 10.55-
Days to Ship : 4 Day(s) or more
-
Quick Fitting Mini Type US Series Union StraightKOGANEI
Standard Price : MYR 117.72-
Days to Ship : 4 Day(s) or more
-
Pipe Fittings Coat Fittings Socket with Resin CoatingYODOSHI
Standard Price : MYR 12.80-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy