(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cast Iron Round Flanged With Spigot Joint (Part Numbers)
Suitable for locations requiring moderate loads and high mounting accuracy, it is used in main shafts of stirrers, among other applications like machine rotating main shaft.
Japanese Only
Part Number
Configured Part Number is shown.
Drawing
UCFC type
Cylindrical hole type, set screw type
UKFC type
Taper hole type, adapter type
With rubber seal Steel plate cover
With steel plate closing cover
Product features details
Structure
Refueling type bearing unit
Lubrication-free bearing unit
Bearing shaft fixing method
General conditions of use
Set screw method
Where rotation accuracy is required
Adapter method
Features and benefits
Lubrication-free type
The bearing unit is filled with an appropriate amount of ideal lithium soap-based grease that is ideal for sealed bearings and can withstand long-term use. Since it is equipped with a unique and excellent sealing device, there is almost no leakage of grease or intrusion of dust and moisture from the outside under general usage conditions. In addition, the sealed grease circulates inside as the bearing rotates, and is designed so that it can fully fulfill its lubrication purpose.
Lubrication type
Compared to other companies' systems, this design allows fueling even when the bearing is aligned to 2°(1° for narrow outer ring bearings) for the left or right. A grease fitting hole has been made in the bearing housing, which would normally reduce the strength of the bearing significantly, but after experiments, the housing was set to the location with the least impact. The oil supply groove is also designed with sufficient consideration to prevent deterioration of housing strength and grease hardening. The lubrication-free bearing unit is sufficient for indoor use under general usage conditions.
Excellent sealing device
The ball bearing sealing device for standard bearing units is a combination of a heat-resistant and oil-resistant synthetic rubber seal and a slinger with a unique design.
The bearing unit with cover has a dust-proof cover attached to the outside of the standard type bearing unit, and the bearing unit is designed with special consideration for dust-proof effect so that it can withstand the environmental conditions of various industrial machines such as heavy dust and watery milling, steel making, casting machine, plating, chemical factory or construction machinery used outdoors and transportation machinery by the sealing mechanism of both the bearing and the housing.
Secure mounting
To fix the shaft and bearing, if you tighten the unique ball-filled set screw provided on the inner ring, the set screw will not loosen easily even if it receives vibration or impact due to its excellent thread-locker effect.
Alignment
The outer diameter surface of the ball bearing for the unit used for the bearing unit and the inner diameter surface of the housing to which it is fitted are finished to be spherical so that they can be aligned by proper fitting. Therefore, it is possible to adjust the deviation of the shaft center caused by the shaft work defect, mounting error, etc.
Large rated load
The bearing used for the bearing unit has the same internal structure as the bearing series 62 and 63, and can receive not only radial load but also axial load or a combined load thereof. The rated load of this bearing is considerably larger than that of the self-aligning ball bearing used in the equivalent standard type plummer block.
Light and strong housing
Housings used for bearing units come in a variety of shapes and materials. Both are reasonably designed to be lightweight and maintain maximum strength.
Easy installation
The bearing unit is a combination of a bearing and a housing. In addition, since the bearing is pre-filled with an appropriate amount of lithium soap-based grease, it can be easily attached to the shaft as it is. It can be used immediately after a simple operation inspection after installation.
Housing fixation
When installing the pillow block unit or flange mount unit, a dowel seat is provided on the mounting surface of the housing in order to increase the degree of fixation, so it can be used as needed.
Bearing compatibility
The bearing unit is compatible between the bearing and the housing, and if the bearing becomes unusable due to heat generation, abnormal noise, etc., the housing can be reused simply by replacing the bearing.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Shaft Bore Dia. d (Ø) | Unit Body Material | Bearing Inner Dia. Shape | Basic Load Rating: Dynamic Load (N) | Basic Load Rating: Static Load (N) | Specifications/Environment | Cover Type | Seal | Lubrication method | Temperature Properties | Heat Resistant Characteristics | Basic Dynamic Load Rating Cr (N) | Specifications | Trusco code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 156.20 | 1 Piece(s) | 2 Day(s) | - | 30 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 19500 | 11300 | - | No | No | Oil Supply Type | Standard | - | 19500 | - | 214-3143 | ||
MYR 199.70 | 1 Piece(s) | 7 Day(s) or more | 10 | 30 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 19500 | 11300 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Room temperature: up to 180°C | 19500 | - | - | ||
MYR 185.56 | 1 Piece(s) | Quote | - | 35 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 25700 | 15300 | - | No | No | Oil-Free Type | Standard | - | 25700 | - | - | ||
MYR 139.72 | 1 Piece(s) | 7 Day(s) or more | 10 | 35 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 25700 | 15300 | - | No | No | Oil Supply Type | Standard | - | 25700 | - | - | ||
MYR 186.15 | 1 Piece(s) | 8 Day(s) | - | 35 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 25700 | 15300 | - | No | No | Oil Supply Type | Standard | - | 25700 | - | 214-3151 | ||
MYR 237.65 | 1 Piece(s) | 7 Day(s) or more | 10 | 35 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 25700 | 15300 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Room temperature: up to 180°C | 25700 | - | - | ||
MYR 212.18 | 1 Piece(s) | 1 Day(s) | - | 40 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 29100 | 17800 | - | No | No | Oil-Free Type | Standard | - | 29100 | - | - | ||
MYR 209.12 | 1 Piece(s) | 2 Day(s) | - | 40 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 29100 | 17800 | - | No | No | Oil Supply Type | Standard | - | 29100 | - | 214-3160 | ||
MYR 280.36 | 1 Piece(s) | 7 Day(s) or more | 10 | 40 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 29100 | 17800 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Room temperature: up to 180°C | 29100 | - | - | ||
MYR 283.00 | 1 Piece(s) | Quote | 10 | 45 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 32500 | 20400 | - | No | No | Oil-Free Type | Standard | - | 32500 | - | - | ||
MYR 259.99 | 1 Piece(s) | 7 Day(s) or more | 10 | 45 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 32500 | 20400 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Room temperature: up to 180°C | 32500 | - | - | ||
MYR 313.13 | 1 Piece(s) | 4 Day(s) | - | 50 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 35000 | 23200 | - | No | No | Oil-Free Type | Standard | - | 35000 | - | - | ||
MYR 325.78 | 1 Piece(s) | 8 Day(s) | - | 50 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 35000 | 23200 | - | No | No | Oil Supply Type | Standard | - | 35000 | - | 214-3186 | ||
MYR 382.03 | 1 Piece(s) | 7 Day(s) or more | 10 | 50 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 35000 | 23200 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Room temperature: up to 180°C | 35000 | - | - | ||
MYR 293.55 | 1 Piece(s) | 4 Day(s) | - | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 29200 | - | No | No | Oil-Free Type | Standard | Standard | 43500 | - | - | ||
MYR 293.55 | 1 Piece(s) | 10 Day(s) | 10 | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 29200 | - | No | No | Oil Supply Type | Standard | Standard | 43500 | - | - | ||
MYR 375.45 | 1 Piece(s) | 7 Day(s) or more | 10 | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 29200 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Heat Resistant Product | 43500 | - | - | ||
MYR 504.75 | 1 Piece(s) | 4 Day(s) or more | - | 60 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 36000 | - | No | No | Oil-Free Type | Standard | Standard | 52500 | - | - | ||
MYR 351.10 | 1 Piece(s) | 8 Day(s) | - | 60 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 36000 | - | No | No | Oil Supply Type | Standard | Standard | 52500 | - | 214-3208 | ||
MYR 449.65 | 1 Piece(s) | 7 Day(s) or more | 10 | 60 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 36000 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Heat Resistant Product | 52500 | - | - | ||
MYR 477.81 | 1 Piece(s) | 4 Day(s) | 10 | 65 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 40000 | - | No | No | Oil-Free Type | Standard | Standard | 57500 | - | - | ||
MYR 477.81 | 1 Piece(s) | 8 Day(s) | 10 | 65 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 40000 | - | No | No | Oil Supply Type | Standard | Standard | 57500 | - | - | ||
MYR 600.30 | 1 Piece(s) | 7 Day(s) or more | 10 | 65 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 40000 | Heat Resistance | No | No | Oil Supply Type | For Heat Resistant | Heat Resistant Product | 57500 | - | - | ||
MYR 584.26 | 1 Piece(s) | 5 Day(s) | 10 | 70 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 44000 | - | No | No | Oil-Free Type | Standard | Standard | 62000 | - | - | ||
MYR 584.26 | 1 Piece(s) | 8 Day(s) | 10 | 70 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 44000 | - | No | No | Oil Supply Type | Standard | Standard | 62000 | - | - | ||
MYR 646.60 | 1 Piece(s) | 5 Day(s) | 10 | 75 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 49500 | - | No | No | Oil-Free Type | Standard | Standard | 66000 | - | - | ||
MYR 646.60 | 1 Piece(s) | 8 Day(s) | 10 | 75 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 49500 | - | No | No | Oil Supply Type | Standard | Standard | 66000 | - | - | ||
MYR 748.98 | 1 Piece(s) | 7 Day(s) | 10 | 80 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 53000 | - | No | No | Oil-Free Type | Standard | Standard | 72500 | - | - | ||
MYR 780.99 | 1 Piece(s) | 8 Day(s) | - | 80 | [Cast Iron] Ductile | Cylindrical Bore Set Screw | - | 53,000 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | - | 72500 | - | - | ||
MYR 873.93 | 1 Piece(s) | 8 Day(s) | 10 | 85 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 64000 | - | No | No | Oil Supply Type | Standard | Standard | 83500 | - | - | ||
MYR 1,123.68 | 1 Piece(s) | 7 Day(s) | 10 | 90 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 71500 | - | No | No | Oil-Free Type | Standard | Standard | 96000 | - | - | ||
MYR 1,123.68 | 1 Piece(s) | 8 Day(s) | 10 | 90 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 71500 | - | No | No | Oil Supply Type | Standard | Standard | 96000 | - | - | ||
MYR 174.29 | 1 Piece(s) | 7 Day(s) | 10 | 25 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 19500 | 11300 | - | No | No | Oil Supply Type | Standard | - | 19500 | X: Adapter sleeve with narrow cut width | - | ||
MYR 209.21 | 1 Piece(s) | 7 Day(s) | 10 | 30 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 25700 | 15300 | - | No | No | Oil Supply Type | Standard | - | 25700 | X: Adapter sleeve with narrow cut width | - | ||
MYR 201.76 | 1 Piece(s) | 7 Day(s) | 10 | 35 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 29100 | 17800 | - | No | No | Oil Supply Type | Standard | - | 29100 | X: Adapter sleeve with narrow cut width | - | ||
MYR 300.56 | 1 Piece(s) | 8 Day(s) | 10 | 40 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 32500 | 20400 | - | No | No | Oil Supply Type | Standard | - | 32500 | X: Adapter sleeve with narrow cut width | - | ||
MYR 258.48 | 1 Piece(s) | 7 Day(s) | 10 | 45 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 35000 | 23200 | - | No | No | Oil Supply Type | Standard | - | 35000 | X: Adapter sleeve with narrow cut width | - | ||
MYR 426.43 | 1 Piece(s) | 7 Day(s) | 10 | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 36000 | - | No | No | Oil Supply Type | Standard | Standard | 52500 | Washer whose cutout width is narrow and adapter sleeve tongue is not bent | - | ||
MYR 555.66 | 1 Piece(s) | 5 Day(s) or more | 10 | 60 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 40000 | - | No | No | Oil Supply Type | Standard | Standard | 57500 | Washer whose cutout width is narrow and adapter sleeve tongue is not bent | - | ||
MYR 668.60 | 1 Piece(s) | 8 Day(s) | 10 | 65 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 44000 | - | No | No | Oil Supply Type | Standard | Standard | 62000 | Washer whose cutout width is narrow and adapter sleeve tongue is not bent | - | ||
MYR 696.02 | 1 Piece(s) | 7 Day(s) or more | - | 70 | [Cast Iron] Ductile | Cylindrical Bore Set Screw | - | 49500 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | - | 66000 | X: Adapter sleeve with narrow cut width | - | ||
MYR 2,466.71 | 1 Piece(s) | 7 Day(s) | - | 100 | [Cast Iron] Ductile | Cylindrical Bore Set Screw | - | 105,000 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | - | 133000 | X: Adapter sleeve with narrow cut width | - | ||
MYR 111.76 | 1 Piece(s) | 7 Day(s) | 10 | 20 | [Cast Iron] Cast Iron | Tapered hole adapter | 14000 | 7850 | - | No | No | Oil-Free Type | Standard | - | 14000 | - | - | ||
MYR 120.48 | 1 Piece(s) | 7 Day(s) | 10 | 25 | [Cast Iron] Cast Iron | Tapered hole adapter | 19500 | 11300 | - | No | No | Oil Supply Type | Standard | - | 19500 | - | - | ||
MYR 183.61 | 1 Piece(s) | 8 Day(s) | 10 | 30 | [Cast Iron] Cast Iron | Tapered hole adapter | 25700 | 15300 | - | No | No | Oil Supply Type | Standard | - | 25700 | - | - | ||
MYR 223.73 | 1 Piece(s) | 8 Day(s) | 10 | 35 | [Cast Iron] Cast Iron | Tapered hole adapter | 29100 | 17800 | - | No | No | Oil Supply Type | Standard | - | 29100 | - | - | ||
MYR 222.77 | 1 Piece(s) | 8 Day(s) | 10 | 45 | [Cast Iron] Cast Iron | Tapered hole adapter | 35000 | 23200 | - | No | No | Oil Supply Type | Standard | - | 35000 | - | - | ||
MYR 292.14 | 1 Piece(s) | 7 Day(s) or more | 10 | 50 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 29200 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | Standard | 43500 | - | - | ||
MYR 375.45 | 1 Piece(s) | 7 Day(s) or more | 10 | 50 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 29200 | Heat Resistance | No | Standard nitrile rubber seal | Oil Supply Type | For Heat Resistant | Heat Resistant Product | 43500 | - | - | ||
MYR 350.39 | 1 Piece(s) | 7 Day(s) or more | 10 | 55 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 36000 | - | No | Standard nitrile rubber seal | Oil-Free Type | Standard | Standard | 52500 | - | - | ||
MYR 550.05 | 1 Piece(s) | 8 Day(s) | 10 | 60 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 40000 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | Standard | 57500 | - | - | ||
MYR 748.98 | 1 Piece(s) | 7 Day(s) | 10 | 70 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 53000 | - | No | Standard nitrile rubber seal | Oil Supply Type | Standard | Standard | 72500 | - | - | ||
MYR 1,061.94 | 1 Piece(s) | 7 Day(s) | 10 | 75 | [Cast Iron] Cast Iron | Tapered hole adapter | - | 64000 | - | No | Standard nitrile rubber seal | Oil-Free Type | Standard | Standard | 83500 | - | - |
Loading...
Basic Information
| Unit, Type | Bearing unit | Bearing Unit, Type | Round flange shape | Rolling Element Material | Steel |
|---|---|---|---|---|---|
| Surface Treatment | No | Set Screws | Set screw with ball |
Specification/Dimensions
-
Shaft Bore Dia. d(Ø)
-
Unit Body Material
- Cast Iron
- Cast Iron
-
Bearing Inner Dia. Shape
- Cylindrical Bore Set Screw
- Tapered hole adapter
-
Specifications/Environment
- Heat Resistance
-
Cover Type
- Cast iron closing cover
- Cast iron cover
- Cast iron cover with a rubber seal
- Cast iron cover with rubber seals
- Cast iron single closing cover
- No
- Steel plate closing cover
- Steel plate cover
- Steel plate cover with rubber seal
- Steel plate single closing cover
-
Seal
- No
- Standard nitrile rubber seal
- With double rubber seals
-
Lubrication method
- Oil-Free Type
- Oil Supply Type
-
Temperature Properties
- For Heat Resistant
- Standard
-
Heat Resistant Characteristics
- Room temperature: up to 180°C
- Heat Resistant Product
- Standard
-
Basic Dynamic Load Rating Cr(N)
-
Specifications
-
type
- C-UCFC
- C-UKFC
- CM-UCFC
- S-UCFC
- S-UKFC
- SM-UCF
- SM-UCFC
- UCFC
- UCFCX
- UKFC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Eccentric Collar Type Unit
- Circular black ship cast iron flange shape
- Cast Iron Diamond Flange Shape
- Steel Plate Flange Mount Unit SBPFL
- Stainless Steel Diamond-Flanged Unit USFL-S6
- Steel Plate Diamond Flange Shape Unit
- Diamond-Shaped Flange-Type Unit EA966BB-25
- Diamond-Shaped Flange-Type Unit EA966BB-51
Customers Who Viewed This Item Also Viewed
-
Cast Iron Round-Flanged Unit With Spigot Joint UCFCFYH
Standard Price : MYR 72.43-
Days to Ship : 5 Day(s) or more
-
Bearing Unit, Cast Iron Flange ShapeNTN
Standard Price : MYR 74.89-
Days to Ship : 1 Day(s) or more
-
-
-
-
Round Flange Mount Unit with Spigot Joint and Set Screws, Cylindrical Hole Shape, UCFCASAHI SEIKO
Standard Price : MYR 76.09-
Days to Ship : 4 Day(s) or more
-
Cast Iron Round Flange Mount Unit With Spigot UKFC, Tapered HoleFYH
Standard Price : MYR 110.78-
Days to Ship : 5 Day(s) or more
-
Adapter (Self-Aligning Ball Bearing)NTN
Standard Price : MYR 36.83-
Days to Ship : 4 Day(s) or more
-
Square Flange Type With Cast Iron SpigotNTN
Standard Price : MYR 179.03-
Days to Ship : 4 Day(s) or more
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy