(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
XAC series carbide roughing end mill, fine pitch / regular model (XAC-RFPR6)
- Volume Discount
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
- TiAlN
- General Steel
- R (Regular)
Part Number
Configured Part Number is shown.
XAC-RFPR6
| Part Number |
|---|
| XAC-RFPR6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Tolerance of OD (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 281.22 | 1 Piece(s) | Available | 4 Day(s) or more | 6 | 16 | 3 | 6 | 57 | Flat Surface / Side Surface / Groove / Inclined Cutting | 0 ~ -0.058 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | |
| Outer Diameter D |
|||||
| XAC-RFPR | 6 | 16 | 57 | 6 | 3 |
| 8 | 16 | 63 | 8 | 3 | |
| 10 | 22 | 72 | 10 | 4 | |
| 12 | 26 | 83 | 12 | 4 | |
| 14 | 26 | 83 | 14 | 4 | |
| 16 | 32 | 92 | 16 | 4 | |
| 20 | 38 | 104 | 20 | 4 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The excellent chip discharge makes it ideal for high speed cutting or groove cutting.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
Basic Information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Roughing | Coating | TiAlN |
|---|---|---|---|---|---|
| Geometry | C Surface | Torsion Angle (θ) | Weak Helix (15 to 25°) | Additional Classification | Stocked Product |
| ● Inventory Product □ Manufacturer Product | ● |
Please check the type/dimensions/specifications of the part XAC-RFPR6 in the XAC series carbide roughing end mill, fine pitch / regular model series.
Specification/Dimensions
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
type
- XAC-RFPR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| XAC-RFPR10 |
| XAC-RFPR12 |
| XAC-RFPR14 |
| XAC-RFPR16 |
| XAC-RFPR20 |
| XAC-RFPR8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Tolerance of OD (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 320.52 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 22 | 4 | 10 | 72 | Inclined Cutting / Flat Surface / Side Surface | 0 ~ -0.070 | |
MYR 393.25 | 1 Piece(s) | Available | 4 Day(s) or more | 12 | 26 | 4 | 12 | 83 | Inclined Cutting / Flat Surface / Side Surface | 0 ~ -0.070 | |
MYR 587.55 | 1 Piece(s) | Available | 4 Day(s) or more | 14 | 26 | 4 | 14 | 83 | Inclined Cutting / Flat Surface / Side Surface | 0 ~ -0.070 | |
MYR 601.25 | 1 Piece(s) | Available | 4 Day(s) or more | 16 | 32 | 4 | 16 | 92 | Inclined Cutting / Flat Surface / Side Surface | 0 ~ -0.070 | |
MYR 854.26 | 1 Piece(s) | Available | 4 Day(s) or more | 20 | 38 | 4 | 20 | 104 | Inclined Cutting / Flat Surface / Side Surface | 0 ~ -0.084 | |
MYR 288.85 | 1 Piece(s) | Available | 4 Day(s) or more | 8 | 16 | 3 | 8 | 63 | Inclined Cutting / Groove / Flat Surface / Side Surface | 0 ~ -0.058 |
Additional Products in this Category
- VAC Series Carbide Roughing End Mill
- SCT S Cut End Mill MX30
- SCT Long S-Cut End Mill MX30
- SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated
- Roughing End Mill for Aluminum Machining AL-OCRL Type
- Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF
- SPSRD3ZA
- OptiMill® SCM470 Composite Material End Mill (8 Flutes)
Customers Who Viewed This Item Also Viewed
-
TSC series carbide roughing end mill, fine pitch / regular modelMISUMI
Days to Ship : 1 Day(s) or more
-
-
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
-
TSC series carbide roughing end mill, fine pitch / short modelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 2 Day(s) or more
-
-
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck ModelMISUMI
Standard Price : MYR 52.72-
Days to Ship : 4 Day(s) or more
-
TSC series carbide roughing end mill, fine pitch / long modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy