(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
(Economy series) XAL series carbide radius end mill, 2-flute / short model (XAL-CR-EM2S1.5-R0.3)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
Radius end mills are available at low prices
- XAL
- General Steel
- 2 Flutes
Part Number
Configured Part Number is shown.
XAL-CR-EM2S1.5-R0.3
| Part Number |
|---|
| XAL-CR-EM2S1.5-R0.3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Model | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Processing Applications | Coating | Torsion Angle (θ) | R Precision (μm) | Additional Classification | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 87.64 | 1 Piece(s) | Available | 4 Day(s) or more | 1.5 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] | 3 | 2 | Radius | 50 | 4 | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 1 |
Loading...
Specifications
Model Number
XAL-CR-EM2S
| Outer Diameter D |
Radius R |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ||||||||
| 1 | 0.1 | 0.2 | 0.3 | 3 | 50 | 4 | 1 | ||||||
| 1.5 | 0.1 | 0.2 | 0.3 | 0.5 | 3 | 50 | 4 | 1 | |||||
| 2 | 0.1 | 0.2 | 0.3 | 0.5 | 6 | 50 | 4 | 1 | |||||
| 2.5 | 0.1 | 0.2 | 0.3 | 0.5 | 6 | 50 | 4 | 1 | |||||
| 3 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 9 | 50 | 4 | 1 | ||||
| 4 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 11 | 50 | 4 | 2 | ||||
| 5 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 13 | 50 | 6 | 2 | ||||
| 6 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 16 | 50 | 6 | 2 | ||
| 8 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 19 | 60 | 8 | 2 | |
| 10 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 25 | 75 | 10 | 2 | |
| 12 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 30 | 75 | 12 | 2 | |
More Information
● Capable of preventing chattering when used as a replacement for square end mills, allowing the expectations of a long operational life.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
● Delivers high-cost performance for pre-hardened steel, aluminum and copper alloys.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.
Please check the type/dimensions/specifications of the part XAL-CR-EM2S1.5-R0.3 in the (Economy series) XAL series carbide radius end mill, 2-flute / short model series.
Specification/Dimensions
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
- Resin
-
Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Groove
- Inclined Cutting
-
type
- XAL-CR-EM2S
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Model
- Radius
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Coating
- For General Steel (AlCrN etc.)
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
-
R Precision(μm)
-
Additional Classification
- Stocked Product
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| XAL-CR-EM2S1-R0.3 |
| XAL-CR-EM2S1.5-R0.1 |
| XAL-CR-EM2S1.5-R0.2 |
| XAL-CR-EM2S1.5-R0.5 |
| XAL-CR-EM2S10-R0.2 |
| XAL-CR-EM2S10-R0.3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Model | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Processing Applications | Coating | Torsion Angle (θ) | R Precision (μm) | Additional Classification | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 87.64 | 1 Piece(s) | Available | 4 Day(s) or more | 1 | 0.3 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 3 | 2 | Radius | 50 | 4 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 1 | |
MYR 87.64 | 1 Piece(s) | Available | 4 Day(s) or more | 1.5 | 0.1 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 3 | 2 | Radius | 50 | 4 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 1 | |
MYR 87.64 | 1 Piece(s) | Available | 4 Day(s) or more | 1.5 | 0.2 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 3 | 2 | Radius | 50 | 4 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 1 | |
MYR 87.64 | 1 Piece(s) | Available | 4 Day(s) or more | 1.5 | 0.5 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 3 | 2 | Radius | 50 | 4 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 1 | |
MYR 205.72 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 0.2 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 25 | 2 | Radius | 75 | 10 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 2 | |
MYR 205.72 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 0.3 | Copper Alloy[◎] / Aluminum Alloy[◎] / Cast Iron[◎] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] / Resin[◯] | 25 | 2 | Radius | 75 | 10 | Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface | For General Steel (AlCrN etc.) | Standard Helix (30 to 40°) | ±0.02 | Stocked Product | 2 |
Additional Products in this Category
- TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type
- TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
- TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
- GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
- ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank
- SAGVR2T SA Coated Carbide Radius 2-Flute
- Mapal CPMill-Uni-FeedPlus "CPM171"
- Diamond Coated General Purpose Router with Corner Radius
Customers Who Viewed This Item Also Viewed
-
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
-
-
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck ModelMISUMI
Standard Price : MYR 52.72-
Days to Ship : 4 Day(s) or more
-
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length modelMISUMI
Days to Ship : 4 Day(s) or more
-
(Economy series) XAL series carbide radius end mill, 4-flute / short modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck ModelMISUMI
Standard Price : MYR 70.84-
Days to Ship : 2 Day(s) or more
-
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short ModelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide long neck radius end mill, 2-flute, long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
-
-
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 2 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy