(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model (XAL-EM2R2)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
The Misumi's unique lineup of fine flute length is available at attractive low prices
- XAL
- General Steel
- 2 Flutes
Part Number
Configured Part Number is shown.
XAL-EM2R2
| Part Number |
|---|
| XAL-EM2R2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Work Material | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Geometry | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 47.44 | 1 Piece(s) | Available | 4 Day(s) or more | 2 | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 6 | 4 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | 1 |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
0.1 | — | 3 | 0.3 | 40 | 1 | No Standards | ● |
| 0.2 | — | 3 | 0.6 | 40 | 1 | No Standards | ● | |
| 0.3 | — | 3 | 0.9 | 40 | 1 | ● | ● | |
| 0.4 | — | 3 | 1.2 | 40 | 1 | No Standards | ● | |
| 0.5 | — | 3 | 1.5 | 40 | 1 | ● | ● | |
| 0.6 | — | 3 | 1.8 | 40 | 1 | ● | ● | |
| 0.7 | — | 3 | 2.1 | 40 | 1 | No Standards | ● | |
| 0.8 | — | 3 | 2.4 | 40 | 1 | ● | ● | |
| 0.9 | — | 4 | 2.7 | 45 | 1 | No Standards | ● | |
| 1 | — | 4 | 3 | 45 | 1 | ● | ● | |
| 1.1 | — | 4 | 3.3 | 45 | 1 | No Standards | ● | |
| 1.2 | — | 4 | 3.6 | 45 | 1 | No Standards | ● | |
| 1.3 | — | 4 | 3.9 | 45 | 1 | No Standards | ● | |
| 1.4 | — | 4 | 4.2 | 45 | 1 | No Standards | ● | |
| 1.5 | — | 4 | 4.5 | 45 | 1 | ● | ● | |
| 1.6 | — | 4 | 4.8 | 45 | 1 | No Standards | ● | |
| 1.7 | — | 4 | 5.1 | 45 | 1 | No Standards | ● | |
| 1.8 | — | 4 | 5.4 | 45 | 1 | No Standards | ● | |
| 1.9 | — | 4 | 5.7 | 45 | 1 | No Standards | ● | |
| 2 | — | 4 | 6 | 45 | 1 | ● | ● | |
| 2.1 | — | 4 | 6.3 | 45 | 1 | No Standards | ● | |
| 2.2 | — | 4 | 6.6 | 45 | 1 | No Standards | ● | |
| 2.3 | — | 4 | 6.9 | 45 | 1 | No Standards | ● | |
| 2.4 | — | 4 | 7.2 | 45 | 1 | No Standards | ● | |
| 2.5 | — | 4 | 7.5 | 45 | 1 | No Standards | ● | |
| 2.6 | — | 4 | 7.8 | 45 | 1 | No Standards | ● | |
| 2.7 | — | 4 | 8.1 | 45 | 1 | No Standards | ● | |
| 2.8 | — | 4 | 8.4 | 45 | 1 | No Standards | ● | |
| 2.9 | — | 4 | 8.7 | 45 | 1 | No Standards | ● | |
| 3 | 4 | 4 | 9 | 45 | 1 | No Standards | ● | |
| 3 | — | 6 | 9 | 45 | 1 | ● | ● | |
| 3.1 | — | 6 | 9.3 | 45 | 1 | No Standards | ● | |
| 3.2 | — | 6 | 9.6 | 45 | 1 | No Standards | ● | |
| 3.3 | — | 6 | 9.9 | 45 | 1 | No Standards | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
3.4 | — | 6 | 10.2 | 45 | 1 | No Standards | ● |
| 3.5 | — | 6 | 10.5 | 45 | 1 | ● | ● | |
| 3.6 | — | 6 | 10.8 | 45 | 1 | No Standards | ● | |
| 3.7 | — | 6 | 11.1 | 45 | 1 | No Standards | ● | |
| 3.8 | — | 6 | 11.4 | 45 | 1 | No Standards | ● | |
| 3.9 | — | 6 | 11.7 | 45 | 1 | No Standards | ● | |
| 4 | 4 | 4 | 12 | 50 | 2 | No Standards | ● | |
| 4 | — | 6 | 12 | 50 | 1 | ● | ● | |
| 4.1 | — | 6 | 12.3 | 50 | 1 | No Standards | ● | |
| 4.2 | — | 6 | 12.6 | 50 | 1 | No Standards | ● | |
| 4.3 | — | 6 | 12.9 | 50 | 1 | No Standards | ● | |
| 4.4 | — | 6 | 13.2 | 50 | 1 | No Standards | ● | |
| 4.5 | — | 6 | 13.5 | 50 | 1 | No Standards | ● | |
| 4.6 | — | 6 | 13.8 | 55 | 1 | No Standards | ● | |
| 4.7 | — | 6 | 14.1 | 55 | 1 | No Standards | ● | |
| 4.8 | — | 6 | 14.4 | 55 | 1 | No Standards | ● | |
| 4.9 | — | 6 | 14.7 | 55 | 1 | No Standards | ● | |
| 5 | — | 6 | 15 | 55 | 1 | ● | ● | |
| 5.1 | — | 6 | 15.3 | 55 | 1 | No Standards | ● | |
| 5.2 | — | 6 | 15.6 | 55 | 1 | No Standards | ● | |
| 5.3 | — | 6 | 15.9 | 55 | 1 | No Standards | ● | |
| 5.4 | — | 6 | 16.2 | 55 | 1 | No Standards | ● | |
| 5.5 | — | 6 | 16.5 | 55 | 1 | No Standards | ● | |
| 5.6 | — | 6 | 16.8 | 60 | 1 | No Standards | ● | |
| 5.7 | — | 6 | 17.1 | 60 | 1 | No Standards | ● | |
| 5.8 | — | 6 | 17.4 | 60 | 1 | No Standards | ● | |
| 5.9 | — | 6 | 17.7 | 60 | 1 | No Standards | ● | |
| 6 | — | 6 | 18 | 60 | 2 | ● | ● | |
| 6.5 | — | 8 | 19.5 | 60 | 1 | No Standards | ● | |
| 7 | — | 8 | 21 | 60 | 1 | ● | ● | |
| 7.5 | — | 8 | 22.5 | 70 | 1 | No Standards | ● | |
| 8 | — | 8 | 24 | 70 | 2 | ● | ● | |
| 8.5 | — | 10 | 25.5 | 70 | 1 | No Standards | ● | |
| 9 | — | 10 | 27 | 70 | 1 | No Standards | ● | |
| 9.5 | — | 10 | 28.5 | 75 | 1 | No Standards | ● | |
| 10 | — | 10 | 30 | 80 | 2 | ● | ● | |
| 11 | — | 12 | 33 | 85 | 1 | No Standards | ● | |
| 12 | — | 12 | 36 | 85 | 2 | ● | ● | |
| 14 | — | 12 | 42 | 80 | 3 | ● | No Standards | |
| 16 | — | 16 | 48 | 110 | 2 | ● | ● | |
| 18 | — | 16 | 54 | 110 | 3 | No Standards | ● | |
| 20 | — | 20 | 60 | 110 | 2 | ● | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
More Information
● An affordable set price that moves according to quantity from 3 pieces and up.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill with a wide operating range. Use for a variety of applications.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.
Basic Information
| Number of Flutes(sheet) | 2 | Model | Square | Coating | For General Steel (AlCrN etc.) |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Please check the type/dimensions/specifications of the part XAL-EM2R2 in the (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model series.
Specification/Dimensions
-
Work Material
- General Steel
- Heat-Treated Steel
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
- Resin
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
type
- XAL-EM2R
- XAL-PEM2R
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
- 0.3
- 0.6
- 0.9
- 1.2
- 1.5
- 1.8
- 2.1
- 2.4
- 2.7
- 3
- 3.3
- 3.6
- 3.9
- 4.2
- 4.5
- 4.8
- 5.1
- 5.4
- 5.7
- 6
- 6.3
- 6.6
- 6.9
- 7.2
- 7.5
- 7.8
- 8.1
- 8.4
- 8.7
- 9
- 9.3
- 9.6
- 9.9
- 10.2
- 10.5
- 10.8
- 11.1
- 11.4
- 11.7
- 12
- 12.3
- 12.6
- 12.9
- 13.2
- 13.5
- 13.8
- 14.1
- 14.4
- 14.7
- 15
- 15.3
- 15.6
- 15.9
- 16.2
- 16.5
- 16.8
- 17.1
- 17.4
- 17.7
- 18
- 19.5
- 21
- 22.5
- 24
- 25.5
- 27
- 28.5
- 30
- 33
- 36
- 42
- 48
- 54
- 60
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| XAL-EM2R0.6 |
| XAL-EM2R0.7 |
| XAL-EM2R0.8 |
| XAL-EM2R2.5 |
| XAL-EM2R20 |
| XAL-EM2R3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Work Material | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Geometry | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 58.39 | 1 Piece(s) | Available | 4 Day(s) or more | 0.6 | Copper Alloy[◎] / Cast Iron[◯] / Aluminum Alloy[◎] / Stainless Steel[◯] / General Steel[◎] / Heat-Treated Steel[◎] | 1.8 | 3 | 40 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | 1 | |
MYR 116.49 | 1 Piece(s) | Available | 4 Day(s) or more | - | - | - | - | - | - | - | - | |
MYR 52.22 | 1 Piece(s) | Available | 4 Day(s) or more | 0.8 | Copper Alloy[◎] / Cast Iron[◯] / Aluminum Alloy[◎] / Stainless Steel[◯] / General Steel[◎] / Heat-Treated Steel[◎] | 2.4 | 3 | 40 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | 1 | |
MYR 51.77 | 1 Piece(s) | Available | 4 Day(s) or more | - | - | - | - | - | - | - | - | |
MYR 829.54 | 1 Piece(s) | Available | 4 Day(s) or more | 20 | Copper Alloy[◎] / Cast Iron[◯] / Aluminum Alloy[◎] / Stainless Steel[◯] / General Steel[◎] / Heat-Treated Steel[◎] | 60 | 20 | 110 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | 2 | |
MYR 56.08 | 1 Piece(s) | Available | 4 Day(s) or more | 3 | Copper Alloy[◎] / Cast Iron[◯] / Aluminum Alloy[◎] / Stainless Steel[◯] / General Steel[◎] / Heat-Treated Steel[◎] | 9 | 6 | 45 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | 1 |
Additional Products in this Category
- XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
- ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_WX-EMS
- Champion Solid, Long Shank End Mill NC-LS-2
- Square End Mill for Processing Hard Brittle Material DCMS
- SPSEE4GA
SP Series Steel Power Mill 4 Flutes / OK coated - Dedicated CoroMill Plura End Mill For Roughing & Finishing, 2S340-MA
- General-Purpose CoroMill Plura End Mill For Extreme Roughing & Finishing, 1P360-XA (Hardness 48 HRC Max.)
- CoroMill Plura End Mill for Turn-Milling
Customers Who Viewed This Item Also Viewed
-
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
-
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) ModelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck ModelMISUMI
Standard Price : MYR 52.72-
Days to Ship : 4 Day(s) or more
-
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 2 Day(s) or more
-
-
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length ModelMISUMI
Days to Ship : 4 Day(s) or more
-
-
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 2 Day(s) or more
-
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck ModelMISUMI
Standard Price : MYR 70.84-
Days to Ship : 2 Day(s) or more
-
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)MISUMI
Standard Price : MYR 168.79-
Days to Ship : 4 Day(s) or more
-
(Economy series) XAL series carbide radius end mill, 2-flute / short modelMISUMI
Standard Price : MYR 87.64-
Days to Ship : 4 Day(s) or more
-
TSC series carbide long neck square end mill, 2-flute / long neck modelMISUMI
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy